Crydom CW24 Series Data Sheet

Panel Mount

Datasheet

CW24 Series

• Ratings from 10A to 125A @ 24-280VAC

• SCR Output for heavy industrial loads

• LED Status Indicator

• UL/CSA/TUV Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

For Generation 3 datasheet click here

PRODUCT SELECTION

Control Voltage 10A 25A 50A 90A 125A

3-32 VDC CWD2410 CWD2425 CWD2450 CWD2490 CWD24125
90-280 VAC CWA2410 CWA2425 CWA2450 CWA2490 CWA24125
18-36 VAC CWA2410E CWA2425E CWA2450E CWA2490E CWA24125E
20-48 VDC/20-280 VAC CWU2410 CWU2425 CWU2450 CWU2490 CWU24125

• AC or DC control and Universal

AC/DC control

• EMC Compliant to Level 3

• Epoxy Free Design

• Removable IP20 touch-safe cover

• DBC substrate for superior thermal

performance

AVAILABLE OPTIONS

Series

Required for valid part number
For options only and not required for valid part number
Not all part number combinations are available.

*

Contact Crydom Technical Support for information on
the availability of a specific part number.

OUTPUT SPECIFICATIONS

Control Voltage
D: 3-32 VDC
U: 20-48 VDC or 20-280 VAC
A: 90-280 VAC
AxxxxE: 18-36 VAC

(2)

Operating
Voltage
24: 24-280 VAC

1024CW D E

Rated Load Current
10: 10 Amps
25: 25 Amps
50: 50 Amps
90: 90 Amps
125: 125 Amps

Thermal Pad
Blank: Not Included
H: Included

Overvoltage Protection
Blank: Not Included
P: Included (1)

-10P H

Switching Type
Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On

Description 90A25A

Operating Voltage (47-440Hz) [Vrms] 24-280 24-280
Transient Voltage [Vpk] 600 600
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1 1
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec) 500 500
Maximum Load Current [Arms]
Minimum Load Current [mArms] 150 250
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 570/600 1290/1350
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.3 1.3
Thermal Resistance Junction to Case (Rjc) [°C/W] 0.3 0.16
Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 1620/1500 8320/7560
Minimum Power Factor (at Maximum load) (1) 0.5 0.5
HP Rating UL 508/IEC60947 [-10 Option][HP (KW)]: 120 VAC 1 (0.74) 3 (2.24)
HP Rating UL 508/IEC60947 [-10 Option][HP (KW)]: 240 VAC 3 (2.2) 7.5 (5.6)
HP Rating UL 508/IEC60947 [HP (KW)]: 120 VAC 0.75 (0.56) 2 (1.5)
HP Rating UL 508/IEC60947 [HP (KW)]: 240 VAC 2 (1.5) 5 (3.73)

INPUT SPECIFICATIONS

(3) 25 90

(2)

Description CWD

Control Voltage Range 3-32 VDC
Maximum Reverse Voltage -32 VDC
Minimum Turn-On Voltage 3 VDC (5)
Must Turn-Off Voltage 1 VDC
Minimum Input Current (for on-state) 10 mA
Maximum Input Current 15 mA
Nominal Input Impedance Current Regulated
Maximum Turn-On Time [msec] 1/2 Cycle (6)
Maximum Turn-Off Time [msec] 1/2 Cycle

24-280 24-280 24-280

600 600 600

1 1 1

500 500 500

10 50 125

150 150 250

380/400 810/850 1900/2000

1.3 1.3 1.25

0.35 0.2 0.11

720/660 3280/3000 18000/16600

0.5 0.5 0.5

0.5 (0.37) 2 (1.5) 5 (3.37)

1.5 (1.1) 5 (3.73) 10 (7.5)

0.5 (0.37) 1 (0.74) 3 (2.24)

1.5 (1.1) 3 (2.2) 7.5 (5.6)

CWA

90-280 VAC (4)

­90 VAC
10 VAC

6 mA

10 mA

Current Regulated

20
30

CWAxxxxE

18-36 VAC

-

18 VAC

4 VAC

13 mA

15 mA

Current Regulated

20
30

125A50A10A

CWU

20-48 VDC/ 20-280VAC

-

19 VDC/VAC

5 VDC/VAC

7/13 mA

11/9 mA

Current Regulated

20
30

Panel Mount

Datasheet

GENERAL SPECIFICATIONS

(1)

ParametersDescription

Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 VDC)

109 Ohms

Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range (7) -40 to 80 °C
Ambient Storage Temperature Range -40 to 125 °C
Weight (typical) 2.88 oz (81.53 g)
Housing Material UL94 V-0
Baseplate Material Aluminum
Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7
Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2
SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2
Input/Output Terminal Screw Thread Size #6-32 UNC / #8-32 UNC
Humidity per IEC60068-2-78 93% non-condensing
LED Input Status Indicator Green

MTBF (Mean Time Between Failures) at 40°C ambient temperature (8)
MTBF (Mean Time Between Failures) at 60°C ambient temperature (8)

11,641,553 hours (1,328 years)

7,210,376 hours (823 years)

WIRING DIAGRAM

AC

V

(9)

Load

1 ( ) 2 ( )

2

OUTPUT

1

SOLI D S T AT E R ELA Y

4

INPUT

3

Terminals

Input

Output

Recommended Wire Sizes

Wire Size

(Solid / Stranded)

24 AWG (0.2 mm

2 x 12 AWG (3.3 mm

20 AWG (0.5 mm

2 x 10 AWG (5.3 mm

2

2

2 x 8 AWG (8.4 mm

4 (– / ) 3 (+ / )

EQUIVALENT CIRCUIT BLOCK DIAGRAMS

CWD Series DC Control

4

-

DC

Trigger
Circuit

Trigger
Circuit

(10)

AC/-DC

AC/+DC

+DC

INPUT

3

4

INPUT

3

Current

Limiter

AC/DC

Converter

CWA/CWU Series AC Control

Current

Limiter

) / 0.2 [minimum]

2

) / 3.3 [maximum]

) / 0.518 [minimum]

2

) / 5.3

2

) / 8.4 [maximum]

(10)

1

OUTPUT

2

1

AC

OUTPUT

2

AC

AC

AC

Wire Pull-Out

Strength (lb)[N]

10 [44.5]

90 [400]

30 [133]

110 [490]

90 [400]

14

12

10

8

6

4

Input Current (mA)

2

0

0 5 10 15 20 25 30 35

7

6

5

4

3

2

Input Current (mA)

1

0

0 50 100 150 200 250 300

16

14

12

10

8

6

4

Input Current (mA)

2

0

0 5 10 15 20 25 30 35

Input Current vs Input Voltage

Standard Regulated DC Input

DC Input Voltage

Input Current vs Input Voltage

Standard Regulated AC Input

AC Input Voltage

Input Current vs Input Voltage

Regulated AC Input Option “E”

AC Input Voltage

Panel Mount

Datasheet

MECHANICAL SPECIFICATIONS

Tolerances: ±0.02 in / 0.5 mm
All dimensions are in: inches [millimeters]

(1)

Screw Termination

1.88

[47.6]

1.1

[27.9]

0.49

[12.4]

OUTPUT

1

S OLID S T A T E R ELA Y

4

INPUT

1.0

1.0

[25.4]

[25.4]

1.75

1.75

[44.5]

[44.5]

Mounting
Hole/Slot

0.19 [4.9]
DIA.

2

1.7

[43.2]

3

0.89

[22.6]

2.25

[57.3]

1.88

[47.6]

1.7

[43.2]

GENERAL NOTES

(1)

Output will self trigger between 900-1200Vpk. Min. power factor 0.7 or higher, not suitable for capacitive loads.

(2) All parameters at 25°C unless otherwise specified.
(3) Heat sinking required, see derating curves
(4) For ambient temperature above 40°C the maximum control voltage must not exceed 250VAC.
(5) Increase minimum voltage by 1V for operations from -20 to -40°C.
(6) Turn-on time for Instantaneous turn-on versions is 0.1 msec and 7msec for CWU models.
(7) AC input models operating range is -20 to 80 °C.
(8)

All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).

(9)

Load can be wired to either SSR output terminal 1 or 2

(10)

Select P option for overvoltage protection.

(11)

For single surge pulse Tc=25°C; Tj=125°C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by

For additional information or specific questions, contact Crydom Technical Support.

.

√

Screw Termination, IP20

1.1

[27.9]

0.49

[12.4]

1.0

1.0

[25.4]

[25.4]

1.75

1.75

[44.5]

[44.5]

2 (1.414).

Mounting
Hole/Slot

0.19 [4.9]
DIA.

2.32

[58.8]

2.25

[57.3]

1.22

[30.9]