Crux SWRHK-65P User Manual

Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335

phone: [phone] • fax: [phone] • www.cruxinterfacing.com

SWRHK-65P

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

Radio Replacement with Steering Wheel Retention for

HYUNDAI and KIA Vehicles with 24 Pin Connector

- Retains factory features in select Hyundai and Kia vehicles while functioning with an aftermarket radio.

- Retains factory 3.5mm Aux Input Jack (if equipped).

- Pre-programmed to retain factory Steering Wheel Controls.

- Includes Hyundai/Kia antenna adapter.

- EIA color coded wiring for easy installation.

SWRHK-65P MODULE SWRHK-65P HARNESS ANTENNA ADAPTER SWC CABLES

illumination (+) Orange

Vehicle Speed Sensor Red/White

Antenna Turn ON Blue

+12V Constant Yellow

+12V ACC Red

Ground Black

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

Audio Signal from 3.5mm Jack Aux-In Red & White RCA

TO FACTORY

HARNESS

24-PIN

Connector

12-Pin Black

Connector

AFTERMARKET

RADIO

SWC

MODULE

RADIO BRAND

(See Chart)

HYUNDAI / KIA

SWC

ON

OFF / ON / ON

1 2 3

Cap or insulate if

not being used

HYUNDAI/KIA ANTENNA

ADAPTOR (Included)

AFTERMARKET

RADIO SELECTOR

(See Chart)

ON

1 2 3

3.5MM SWC CABLES (Option A or B)

Use the proper 3.5MM to 4-Pin cable for your radio.
Plug in the selected 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS” section.

HYUNDAI / KIA TYPE

SWC SETTING

(See Radio Type)

ON

1 2 3

Note:
Output signal(s) stated above may not cover all Year/Model.

Insulate with tape

if not being used

1 of 2

BLUE / YELLOW

Option A:

Option B:

rev.051918

Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335

phone: [phone] • fax: [phone] • www.cruxinterfacing.com

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

VEHICLE APPLICATIONS:

DIP SWITCH SETTINGS:

HYUNDAI / KIA STEERING WHEEL CONTROL DIP SWITCH SETTING:

DIP: 1 2 3

Hyundai / Kia OFF ON ON

AFTERMARKET RADIO DIP SWITCH SETTINGS:

RADIO BRAND: DIP: 1 2 3

SWC MODULE

ON

1 2 3

ON

1 2 3

SWRHK-65P

HYUNDA / KIA
SWC SELECTOR

Dual, Fahrenheit, Jensen, Pioneer
Power Acoustik, Soundstream
Alpine
Clarion
Kenwood
JVC
Sony, Boss

OFF ON ON
OFF ON ON
OFF OFF OFF
ON ON OFF
ON ON ON
ON OFF ON
ON OFF OFF

AFTERMARKET

RADIO SELECTOR

ON

1 2 3

3.5MM SWC CABLE

Use the proper 3.5MM to 4-Pin SWC cable for the aermarket radio you are using.

OPTION A is used for ALPINE, CLARION, (JVC and KENWOOD units will use the Blue/Yellow wire).
OPTION B is used for BOSS, DUAL, FAHRENHEIT, JENSEN, POWER ACOUSTIK, PIONEER, SONY and

SOUNDSTREAM units.

NOTE: Cap or insulate the 3.5mm plug or Blue/Yellow wire if not being used.

SWC 3.5MM PLUG ADAPTER:

Use the supplied 3.5MM SWC Plug adapter for aermarket radios that do not have a 3.5mm SWC jack.

OPTION A or B

(included in kit)

RED to SWC Key 1
WHITE to SWC Key 2
SHIELD to SWC Ground

ON

1 2 3

Hyundai

2006 - 2009 Accent
2006 - 2008 Azera

2009 - 2011 Azera (with NAV Radio + AMPs)

2007 - 2008 Elantra

2007 - 2008 Entourage

2009 - 2009 Genesis

2008 - 2009 Santa Fe (with NAV Radio + AMPs)

2009 - 2010 Sonata

2007 - 2008 Veracruz
2009 - 2010 Veracruz (with NAV Radio + AMPs)

Kia

2006 - 2008 Aman*
2006 - 2008 Opma
2007 - 2008 Rondo
2006 - 2008 Sedona*

2007 - 2009 Spectra

2009 - 2010 Sportage

*Not equipped with Seek Up/Dn on SWC

2 of 2

rev.051918