Crux RVCGM-80M User Manual

INTERFACING SOLUTIONS

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: [phone] • fax: [phone] • www.cruxinterfacing.com

PRODUCT FEATURES:

PARTS INCLUDED:

R

Sightline

Multi View Integration

Front & Rear Camera Integration Interface for

Select CHEVROLET and BUICK Vehicles with 7” MyLink Systems

RVCGM-80M

- Adds front and rear camera inputs.

- Front camera automacally shows on the screen aer changing the gear from reverse to drive.

- Programmable front camera delay OFF me using the OSD menu.

RVCGM-80M Module RVCGM-80M T-Harness LVDS Cable

GVIF Video Cables LVDS Video Extension Board OSD Control Pad

1 of 4

rev.030519

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: [phone] • fax: [phone] • www.cruxinterfacing.com

WIRING DIAGRAM:

INTERFACING SOLUTIONS

Video Extension Cable

VIDEO

MODULE

RVCGM-80M

R

Sightline

MAIN

Multi View Integration

RVCGM-80M

Front & Rear Camera Integration Interface for

Select CHEVROLET and BUICK Vehicles with 7” MyLink Systems

OEM Headunit

LVDS Video

Extension Board

GVIF Video Cables

Red = +12V ACC
Black = Ground
Brown = CAN High
To OSD Control Pad
Front Camera Input

Rear Camera Input
Front/Rear Camera +12V Power

Ground
Green = Rear Camera Manual Trigger*
Blue = Front Camera Manual Trigger*

*Use these wires if not using CAN Trigger.
Green wire = Connect to Reverse Light +12V
Blue wire = Connect to +12V using a toggle switch

OEM Monitor

OEM GVIF
Cable

CAN WIRE CONNECTION:

The RVCGM-80M detects the CAN communicaons in the
vehicle. Tap the BROWN wire (GM LAN) on the power harness
to the GREEN wire (PIN# 28) on the 44 pin OEM connector
behind the headunit Reverse gear engagement is automacally
detected and will power on the rear camera. The front camera
will power on when the gear is put to Drive. The delay OFF of
the front camera can be set in the OSD menu. Time delay OFF
can be set from 1 to 60 seconds.

If for some reason the CAN connecon cannot detect the
reverse gear communicaon, connect the GREEN wire on the
RVCGM-80M power harness (Rear Camera Manual Trigger) to
the reverse light wire +12V.

The Front camera also be also be manually triggered by
connecng the BLUE wire (Front Camera Manual Trigger) to
+12V.

2 of 4

GREEN wire Single CAN wire PIN# 28

rev.030519

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: [phone] • fax: [phone] • www.cruxinterfacing.com

R

DIP SWITCH SETTINGS:

ON SCREEN DISPLAY (OSD) SETTINGS:

Sightline

Multi View Integration

INTERFACING SOLUTIONS

Select CHEVROLET and BUICK Vehicles with 7” MyLink Systems

Front & Rear Camera Integration Interface for

Set all DIP switches to OFF (Up).

The OSD Seng Screen automacally pops up when the OSD Control Pad is connected.

OSD Control Pad

RVCGM-80M

Use the OSD menu to make the necessary sengs. Remember to Run Save&Reboot aer the sengs are made.
Unplug the OSD Control Pad aer seng the cameras and keep it in a secure locaon in case it is needed to change
the sengs.

REAR CAMERA SETTING

3 of 4

rev.030519

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: [phone] • fax: [phone] • www.cruxinterfacing.com

R

VEHICLE APPLICATIONS:

INTERFACING SOLUTIONS

FRONT CAMERA SETTING

Sightline

Multi View Integration

RVCGM-80M

Front & Rear Camera Integration Interface for

Select CHEVROLET and BUICK Vehicles with 7” MyLink Systems

The front Camera will automacally show on the screen when the gear is put to Drive from Reverse. Delay OFF me
can be set from 1 to 60 seconds aer a pung the car to drive from reverse. See seng image above.

Compable with 7” MyLink Systems

BUICK

2012 - 2015
2013 - 2015

LaCrosse
Verano

2015 Camaro Radio

CHEVROLET

2013 - 2015
2013 - 2015
2012 - 2015
2013 - 2015
2013 - 2015

Camaro
Cruze

Equinox
Malibu
Volt

2015 Malibu Radio

4 of 4

rev.030519