Important Safeguards ............................................................................................................................4-6
Additional Important Safeguards ..................................................................................................... 7-8
Notes on the Plug ........................................................................................................................................ 8
Notes on the Cord ....................................................................................................................................... 9
Electric Power ............................................................................................................................................... 9
Getting to Know Your Single Serve Coffee Maker ...................................................................... 10
Adjusting the drip tray .............................................................................................................................14
Setting up your Single Serve Coffee Maker using the capsule adaptor. .....................15-16
Setting up your Single Serve Coffee Maker using the ground coffee adaptor. ........16-17
Setting up your Single Serve Coffee Maker to boil water ........................................................18
Setting Up your Single-Serve Coffee Maker for Iced Beverages Using a Capsule ....... 19
Using Ground Coffee ................................................................................................................................. 19
Brewing Another Cup ...............................................................................................................................19
User Maintenance Instructions .............................................................................................................19
Care & Cleaning Instructions ...............................................................................................................20
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surface. Use handles or knobs only.
3. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
4. Close supervision is necessary when any appliance is used
by or near children.
5. In order to minimize the risk of property damage, never place
the Coffee Maker under cabinets. Make sure the area several feet
above the Coffee Maker is clear from all furniture or cabinetry.
6. Do not open top cover while coffee is brewing. Scalding may occur
if the cover is lifted or removed during the brewing cycle.
7. Do not use outdoors.
8. Unplug unit from outlet when either the appliance or display clock
is not in use, and before cleaning. Allow unit to cool before putting
on or taking off parts, and before cleaning.
9. To protect against fire, electrical shock and injury to persons do not
immerse cord, plugs, or appliance in water or other liquids.
4
Page 5
10. Do not operate any appliance with a damaged cord or plug, or after
the appliance malfunctions, or has been damaged in any manner.
Return appliance to the nearest authorized service facility for
examination, repair or adjustment. NOTE:DO NOT ATTEMPT TO
REPAIR THE UNIT YOURSELF. THIS WILL VOID THEWARRANTY.
11. The use of accessory attachments not recommended by the
appliance manufacturer may result in fire, electric shock or injury
to persons.
12. Never move the appliance by pulling the cord. Do not let the cord
hang over the edge of a table or counter or touch hot surfaces.
13. Stand the appliance on a table or flat surface.
14. To interrupt the brew cycle press either the 6oz, 10oz or 15oz
button, whichever one was originally pressed to start the brewing
cycle. Then remove plug from wall outlet.
15. Never use your Coffee Maker without water in it.
16. Do not place appliance on or near a hot gas or electric burner
or in a heated oven.
17. Unplug the power cord from the electrical outlet when
the appliance is not in use, left unattended.
18. Do not use this appliance for other than its intended use.
19. Scalding may occur if the lid is removed during the brewing cycles.
20. To reduce the risk of fire, do not mount unit over or near any
portion of a heating or cooking appliance.
21. To reduce the risk of electric shock, do not mount over a sink.
5
Page 6
22. To reduce the risk of fire, do not store anything directly on top
of the appliance surface when the appliance is in operation.
CAUTION: There are two sharp needles that puncture the capsules.
Oneislocated inside the capsule adaptor and the other is located
onthetop underside of the adaptor compartment. To avoid risk of
injury do not place fingers inside either parts. Also exercise caution
when cleaning theparts.
CAUTION: There is boiling water in the front tab lid section during
thebrew process. Do not open the lid at any time for risk of injury.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
6
Page 7
ADDITIONAL IMPORTANT
SAFEGUARDS
WARNING: This appliance generates heat and escaping steam during
use. Proper precautions must be taken to prevent the risk of burns,
fires, orother injury to persons or damage to property.
1. All users of this appliance must read and understand this Instruction
Manual before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120V AC
electrical outlet only.
3. Use water only in this appliance! Do not put any other liquids
or food products in this appliance. Do not mix or add anything
to the water placed in this appliance, except as instructed
in the User Maintenance Instructions to clean the appliance.
4. DO NOT attempt to move an appliance containing hot liquids.
Allow appliance to cool completely before moving.
5. Keep appliance at least 4 inches away from walls or other objects
during operation. Do not place any objects on top of appliance
while it is operating. Place the appliance on a surface that
is resistant to heat.
6. If this appliance begins to malfunction during use,
immediately unplug the cord. Do not use or attempt to repair
the malfunctioning appliance.
7
Page 8
7. If this appliance falls or accidentally becomes immersed in water
or any other liquid, unplug it immediately. Do not reach into
the water! Do not use this appliance after it has fallen into
or has become immersed in water.
8. The appliance must be left to cool down sufficiently before adding
more water to avoid exposure to steam.
9. Always use fresh, cool water in your appliance. Warm water
or other liquids, except as listed in cleaning section, may cause
damage to the appliance.
NOTES ON THE PLUG
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
8
Page 9
NOTES ON THE CORD
a) A short power-supply cord (or detachable power-supply cord)
is to be provided to reduce risks resulting from becoming entangled
in or tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords
are available and may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the detachable
power-supply cord or extension cord should be at least
as great as the electrical rating of the appliance;
2) If the appliance is of the grounded type, the extension cord
should be a grounding- type 3-wire cord; and
3) The longer cord should be arranged so that it will not drape
over the counter top or table top where it can be pulled
on by children or tripped over.
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your
appliance may not operate properly. It should be operated
on a separate electrical circuit from other appliances.
9
Page 10
Getting To Know Your Single Serve Coffee Maker
Product may vary slightly from illustration
Front Lid Tab
Locking Adaptor
Compartment Lid
Water Tank Lid
Adaptor Compartment
Removable 40 oz Water Tank
Nozzle
Capsule Punch
Drip Tray Slots
Base
10
Electric Cord with
Polarized Plug
Page 11
Capsule Adaptor
Drip Tray Cover
Coffee Adapter
Lid
Reusable Ground
Coffee Adaptor
6-oz., 10-oz. and 15-oz.
marking levels
Adjustable Height
Drip Tray with
Back Tab
Introduction
• This single-serve Coffee Maker uses a pressurized system to brew a perfect single hot
beverage.
• The adjustable drip tray accommodates most cup sizes, mugs, tall travel mugs or
tumblers.
• Use the ground coffee adaptor (included) to create special blends of your favorite coffee.
For added personalization, add a dash of your favorite spice, from cinnamon, orange
peel, cardamom or vanilla bean to name a few.
• Using the reusable ground coffee adaptor is an environmentally-friendly choice that will
also save you money!
11
Page 12
Before Using for the First Time
CAUTION: To protect against electrical shock, do not immerse the Coffee Maker or allow
the power cord to come into contact with water or other liquids.
1. Remove all packing material and labels from the inside and outside of the Coffee
Maker. Place the unit on a flat, clean surface. Make sure to remove both adaptors from
the inner packaging.
2. Before use, thoroughly clean both adaptors with warm soapy water.
3. To clean the inside of the unit, it is recommended to brew a full tank of water, which
corresponds to brew 3 to 4 tall cups.
4. Grasp the removal water tank using
the designated grips. Lift the water tank
up and remove it from the base of the unit.
(See Figure 1).
5. Remove the lid and fill the water tank
to the MAX indicator line with cold water.
NOTE: Never fill the water tank past
the MAX indicator line and ensure water
level is above the MIN indicator line.
6. Put the lid back and put the water tank
back into place. Place down firmly to make
sure it is securely in place.
7. Select the desired height for the drip tray,
depending on the size of the cup, mug,
or tumbler being used.
8. Place the empty cup, mug, or tumbler in position on the drip tray cover.
NOTE: Do not add any adaptor for this initial cleaning.
9. To select the brew size press either the 6-oz, 10-oz or 15-oz button.
10. The light on the selected button size will begin to flash as the Coffee Maker begins
heating the water.
Figure 1
12
Page 13
11. When the water has reached the optimum temperature, the light on the button will
illuminate solid. Water will begin to stream through the nozzle. At the end of the cycle,
the Coffee Maker and indicator light will automatically TURN OFF.
IMPORTANT: Repeat this process twice to thoroughly clean the machine before using
for the first time.
12. Unplug the Coffee Maker when not in use.
Brewing Instructions
The drip tray adjusts to two heights to accommodate shorter cups or mugs to taller travel
mugs/tumblers. For taller travel mugs and tumblers, make sure the drip tray and cover
are properly placed in the lower position.(See Figure 2.) When brewing a smaller cup, raise
the drip tray to the upper level to avoid splatter. (See Figure 4.)
13
Page 14
Adjusting the Drip Tray
1. Grasp the drip tray and cover from the base. (See Figure 2.)
2. Holding on to both pieces, slightly tilt upwards and slide out from the unit.
(See Figure 3.)
3. Using the tab on the back of the drip tray as your guide, again slightly tilt both pieces
upwards and glide the tabs into the upper slots on the Coffee Maker body.
(See Figure 4.) Press down on the drip tray with your hand to make sure it is firmly
and properly attached before placing the cup or mug on top.
Upper
Slots
Figure 3
Figure 4Figure 2
14
Page 15
Setting Up your Single Serve Coffee Maker Using
theCapsuleAdaptor
WARNING: Before brewing, it is recommended the water tank be filled at least
to the MIN indicator line.
To avoid damage to your Coffee Maker, never operate your Single Serve Coffee Maker when
the water tank is empty.
1. Grasp the removal water tank using the designated grips. Lift the water tank
up and remove it from the base of the unit. (See Figure 1.)
2. Remove the lid and fill the water tank to the MAX indicator line with cold water.
NOTE: Never fill the water tank past the MAX indicator line and ensure water level
is above the MIN indicator line.
IMPORTANT: For optimal flavor, distilled or filtered water is preferred.
3. Put the lid back and put the water tank back into place. Place down firmly to make sure
it is securely in place.
4. Select the desired height for the drip tray, depending on the size of the cup, mug,
or tumbler being used
5. Place the empty cup, mug, or tumbler in position on the drip tray cover
6. Pull the adaptor compartment’s front tab up to unlock and lift the lid.
7. Choose the capsule adaptor. Add the capsule of your choice into the adaptor.
Press down on the capsule until it is flush with the adaptor.You will hear a pierce
as the needle penetrates the capsule.
8. With the handle facing front, place the capsule adaptor into the adaptor compartment.
Slide the adaptor handle in to the grooves at the front of the Coffee Maker.
9. Press the adaptor compartment’s lid down firmly. An audible click can be heard as the lid
is locked firmly into position, and the top of the capsule will be punctured.
10. Plug the Coffee Maker into a 120V AC electrical wall outlet
11. To select the brew size press either the 6-oz, 10-oz or 15-oz button.
12. The light on the selected button size will begin to flash as the Coffee Maker begins
heating the water.
15
Page 16
13. When the water has reached the optimum temperature, the light on the button will
illuminate solid.
14. The pump will then activate and coffee will begin to stream through the nozzle.
15. To interrupt the brewing cycle at any time, press the same size button you had originally
selected. Then remove the plug from the wall outlet.
16. At the end of the cycle, the Coffee Maker and all indicator light will automatically
turn OFF.
17. Allow unit to cool before removing the used capsule to discard.
18. Unplug the Coffee Maker when not in use.
Setting Up your Single Serve Coffee Maker with Water Tank
Using the Ground Coffee Adaptor
The ground coffee adaptor allows you to create your own favorite blend of coffee.
Personalize your blends by adding a dash of cinnamon, orange peel, cardamom or vanilla
bean for flavoring, to name a few options.
NOTE: For best results, use medium ground coffee.
WARNING: Before brewing, it is recommended the water tank be filled at least to the MIN
indicator line. To avoid damage to your Coffee Maker, never operate your Single Serve
Coffee Maker when the water tank is empty.
1. Grasp the removable water tank using the designated grips. Lift the water tank
up and remove it from the base of the unit. (See Figure 1)
2. Remove the lid and fill the water tank to the MAX indicator line with cold water.
NOTE: Never fill the water tank past the MAX indicator line and ensure water level
is above the MIN indicator line.
IMPORTANT: For optimal flavor, distilled or filtered water is preferred.
3. Put the lid back and put the water tank back into place. Place down firmly to make sure
it is securely in place.
4. Select the desired height for the drip tray, depending on the size of the cup, mug,
or tumbler being used.
16
Page 17
5. Place the empty cup, mug, or tumbler in position on the drip tray cover.
6. Pull the adaptor compartment’s front tab up to unlock and lift the lid.
7. Choose the ground coffee adapter and fill it with medium size ground coffee.
There are indicator lines inside the filter for 6-oz, 10-oz and 15-oz servings.
Add the desired amount of coffee to the line of your choice. DO NOT EXCEED the 15-oz
line. Once the coffee has been added, close the ground coffee adapter lid.
8. With the handle facing front, place the ground coffee adaptor into the adaptor compartment.
Slide the adaptor handle into the grooves at the front of the Coffee Maker.
9. Press the adaptor compartment’s lid down firmly. An audible click can be heard as the lid
is locked firmly into position.
10. Plug the Coffee Maker into a 120V AC electrical wall outlet.
11. To select the brew size press either the 6-oz, 10-oz or 15-oz button, and the brew cycle
will begin.
12. The indicator light will begin to flash as the Coffee Maker begins heating the water.
13. When the water has reached the optimum temperature, the light on the button will
illuminate solid.
14. The pump will then activate and coffee will begin to stream through the nozzle.
15. To interrupt the brewing cycle at any time, press the same size button you had originally
selected. Then remove the plug from the wall outlet.
16. At the end of the cycle, the Coffee Maker and all indicator light will automatically
turn OFF.
17. Unplug the Coffee Maker when not in use.
17
Page 18
Setting Up your Single Serve Coffee Maker with Water Tank
toBoil Water
Heating plain water in your Single Serve Coffee Maker is quick and easy. Water is dispensed
at the perfect temperature for preparing single cups of bagged teas, instant soups, quick
cooking oats, packaged hot chocolate, hot apple cider or anything that requires boiling
water.
WARNING: Before brewing, it is recommended the water tank be filled at least to the MIN
indicator line. To avoid damage to your Coffee Maker, never operate your Single Serve
Coffee Maker when the water tank is empty.
IMPORTANT: To prevent tainted or “off” flavors when changing hot beverages, while
the unit is OFF, use a damp paper towel to completely remove any residue from the adaptor
compartment.
1. Follow detailed brewing instructions described previously.
2. Prepare your cup, mug, or tumbler by placing the item of your choice into the mug
3. Select either adaptor. With the handle facing front, place the adaptor of choice into
the adaptor compartment. Slide the adaptor handle into the grooves at the front
of the coffee maker.
4. Following detailed instructions described previously, adjust the drip tray to accommodate
your cup, mug, or tumbler.
5. Center the cup under the nozzle
6. To select the brew size press either the 6-oz, 10-oz or 15-oz button, and the brew cycle
will begin.
7. After water has been heated and dispensed, stir contents of mug well.
18
Page 19
Setting Up your Single-Serve Coffee Maker for Iced Beverages
Using a Capsule:
Follow the “SETTING UP YOUR SINGLE-SERVE COFFEE MAKER USING THE CAPSULE
ADAPTOR” instructions with the following adjustments:
1. Use K-Cup® capsule with a stronger flavour.
2. Use a tall (approximately 20-oz.) cup/tumbler filled with ice cubes.
CAUTION: Do not use with a glass cup/tumbler as there is risk the glass may crack
or break.
Using Ground Coffee:
Follow the “SETTING UP YOUR SINGLE-SERVE COFFEE MAKER USING THE GROUND
COFFEE ADAPTOR” instructions.
1. Fill the reusable ground coffee adaptor to the 15-oz fill line.
2. Use a tall (approximately 20-oz.) cup/tumbler filled with ice cubes.
CAUTION: : Do not use with a glass cup/tumbler as there is risk the glass may crack
or break.
Brewing Another Cup
You can brew cup after cup of your favorite hot beverage.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user-serviceable parts.
Any servicing requiring disassembly other than cleaning must be performed
by a qualified appliance repair technician.
19
Page 20
Care & Cleaning Instructions
1. Always make sure Coffee Maker is unplugged and the drip tray and cover are cool before
removing from the base.
2. Rinse drip tray and cover and replace in the Coffee Maker base.
3. Press the adaptor compartment’s front lid to unlock and lift the lid.
4. Remove the used capsule from the capsule adaptor and discard. Rinse the capsule
adaptor in warm water before each use.
5. When using the reusable ground coffee adaptor, discard the used coffee. Wash adaptor
in warm, soapy water, to remove all coffee grinds. Rinse well.
NOTE: Both the capsule and the ground coffee adaptors are top rack dishwasher safe.
6. Use a damp paper towel or sponge to completely remove any residue from the adaptor
compartment.
7. Wipe the exterior of the Coffee Maker with a damp cloth to remove superficial stains.
For stubborn stains, use a nylon or plastic pad with a non-abrasive cleanser.
Do not use metal scouring pads or abrasive cleansers.
Descaling Instructions
Special cleaning of your Coffee Maker is recommended at least twice a year, depending
on frequency of use and quality of water used in the unit. If water in your area is especially
hard, the following cleaning procedure should be performed more often, since minerals
in water can detract from the flavor of the coffee and possibly lengthen brew time.
1. Fill water tank with 1 part white vinegar (3-oz.) to 3 parts cold water (9-oz.).
2. Do not add any adaptor.
3. Place an empty tumbler in position on the drip tray cover
4. To select brew size press either the 6-oz, 10-oz, 15-oz button.
5. The light on the selected button size will begin to flash as the Coffee Maker begins
heating the cleaning solution.
6. The indicator light on the selected size button will illuminate solid as the cleaning solution
begins to stream through the nozzle. At the end of the cycle, the Coffee Maker and
indicator light will automatically TURN OFF.
20
Page 21
7. Repeat steps 3 to 5 until the water tank is empty.
8. Following the same procedure, continue to run clean water through the Coffee Maker
three times, or until water is clean and fresh and no residual vinegar odor or flavor
remains.
9. Unplug the Coffee Maker when not in use.
10. Dry parts thoroughly. Wipe the Coffee Maker’s exterior with a dry cloth
Storing Instructions
1. Unplug unit and allow to cool.
2. Never wrap cord tightly around the appliance. Do not put any stress on the cord where it
enters the unit, as it could cause the cord to fray and break.
3. Store one clean adaptor in the Coffee Maker’s adaptor compartment.
4. Store the other adapter with the unit.
5. Store the Coffee Maker in a cool, dry place.
6. Never store unit while it is still plugged in.
21
Page 22
Limited Two-Year Warranty
SENSIO Inc. hereby warrants that for
a period of TWO YEARS from the date
of purchase, this product will be free
from mechanical defects in material
and workmanship, and for 90 days in
respect to non-mechanical parts. At its
sole discretion, SENSIO Inc. will either
repair or replace the product found to
be defective, or issue a refund on the
product during the warranty period.
Exclusions:
The warranty does not cover normal
wear of parts or damage resulting
from any of the following: negligent
use of the product, use of improper
voltage or current, improper routine
maintenance, use contrary to the
operating instructions, disassembly,
repair, or alteration by anyone other
than qualified SENSIO Inc. personnel.
Also, the warranty does not cover
Acts of God such as fire, floods,
hurricanes, or tornadoes.
SENSIO Inc. shall not be liable for
any incidental or consequential
damages caused by the breach of
any express or implied warranty.
The warranty is only valid for the
original retail purchaser from the
date of initial retail purchase and is
not transferable. Keep the original
sales receipt, as proof of purchase
is required to obtain warranty
validation. Retail stores selling this
product do not have the right to alter,
modify, or in any way revise the terms
and conditions of the warranty.
Apart from the extent prohibited by
applicable law, any implied warranty
of merchantability or fitness for a
particular purpose is limited in time
to the duration of the warranty. Some
states, provinces or jurisdictions do
not allow the exclusion or limitation of
incidental or consequential damages,
or limitations on how long an implied
warranty lasts, and therefore, the
above exclusions or limitations may
not apply to you. The warranty covers
specific legal rights which may vary by
state, province and/or jurisdiction.
22
Page 23
How To Obtain Warranty Service:
You must contact Customer Service at
our toll-free number: 1-866-832-4843.
A Customer Service Representative
will attempt to resolve warranty issues
over the phone. If the Customer Service
Representative is unable to resolve the
problem, you will be provided with a
case number and asked to return the
product to SENSIO Inc. Attach a tag to
the product that includes: your name,
address, daytime contact telephone
number, case number, and description
of the problem.
Also, include a copy of the original
sales receipt. Carefully package
the tagged product with the sales
receipt, and send it (with shipping
and insurance prepaid) to SENSIO
Inc.’s address. SENSIO Inc. shall bear
no responsibility or liability for the
returned product while in transit
to SENSIO Inc.’s Customer Service
Center.