Crux AVS-44 User Manual
• 4 AV-inputs
• 4 AV-outputs
• Individual AV-input can be switched to any AV-output
• Switching by keypad or any IR remote control (NEC-standard)
• Programmable IR remote controls possible
• Last-source-memory
• Power-memory
Audio-video-inputs AV1-IN – AV4-IN
Cable colour
Assignment
● Yellow
Video signal
● Red
Audio signal right
● White
Audio signal left
Audio-video-outputs AV1-OUT – AV4-OUT
Cable colour
Assignment
● Yellow
Video signal
● Red
Audio signal right
● White
Audio signal left
060215
1
Connection for Power
Cable colour
Assignment
● Black
Ground
● Red
+12V ACC
By Keypad
The keypads are used to switch the AV-inputs. Keypad AV1 switches the AV-inputs of AV1OUT, keypad AV2 switches the AV-inputs of AV2-OUT, etc. Each press will switch to the next
AV-input. The order is:
AV1-IN → AV2-IN → AV3-IN → AV4-IN → AV1-IN →…
The last selected AV-input is stored (Last-source-memory).
By Remote Control
Alternatively or additionally to the keypads an IR remote control can be used to switch the
AV-inputs. The optional available IR sensor C3C-SENSOR is necessary for use.
It is possible to program each IR remote control. Press and hold keypad of the current AVoutput, press the favored button of the remote control and let go of the keypad. The
selected button of the IR remote control is now programmed and it will switch the AVinputs.
Operation voltage 10.5 – 14.8V
Stand-by power drain 0mA
Power consumption ~45mA
Temperature range -30°C to +80°C
Weight 237g
060215
2 / 2
Loading...