Crux AVIMB-1 User Manual

2012-2014

C-Class

2013-2014

GLK

2013-2014

CLS

2012-2015

ML

2012-2015

E-Class

2012-2015

SL

2012-2015

G-Class

2012-2015

SLK

2013-2015

GL

2011-2013

SLS

2015-2015

GLA

1

rev.060215

Mercedes Benz

- The AVIMB-1 will enable the Auxiliary Audio/Video Input on the navigation radio menu.

continued

2 / 2

rev.060215

1. Locate OBD-port and remove cover (commonly located under the dashboard on the

driver side).

2. Turn ignition switch to ACC.

3. Wait until the navigation has booted.

4. Plug coder into OBD-port.

5. The navigation will re-boot.

6. When the navigation startup-screen shows, remove coder from OBD-port.

7. Your radio’s Auxiliary Audio / Video input feature is now enabled.

8. Plug the aqua blue FAKRA connector to the back of the display’s green FAKRA socket.

9. Use a video RCA extension cable (not included) and plug it between the FAKRA to RCA

video adaptor cable and the video source (i.e. DVD Player)

10. Plug the black audio connector harness behind the radio and plug in the audio source.

To remove the Auxiliary Audio/Video feature from the navigation’s menu repeat steps 1-6. After
the first use on a vehicle, the coder AVIMB-1 is personalized to this vehicle. On this vehicle the
enabling and removing the audio/video feature can be repeated without limit.

1. Activating the Auxiliary Audio/Video Input feature on the radio will create an A/V AUX tab on
the source drop down menu.

2. Plug in your external A/V source, ie. DVD player to the A/V input cable.

3. Using the Comand controller on the center console, go to the source menu and click on the
A/V AUX tab.

4. Video will appear on the display and audio should be heard on the factory sound system.