Crucial CT4G4DFS8266, CT8G4DFS8266, CT8G4SFS824A, CT8G4SFS8266, BLS4G4D240FSB User manual

The memory & storage experts

™

Install Guide

Memory Module Installation

Equipment needed

• Memory module(s)

• Non-magnetic-tip screwdriver (for removing the cover
on your computer)

• Your system’s owner’s manual

Installation process

1. Make sure that you are working in a static-safe environment.
Remove any plastic bags or papers from your work space.

2. Shut down your system and make sure the power is
completely o before unplugging the power cable from your
computer. For laptops, then remove the battery.

3. Hold the power button for 3-5 seconds to discharge residual
electricity.

4. Remove your computer’s cover. Refer to your owner’s
manual for how to do this.

1

5. To protect your new memory modules and your system’s
components from static damage during the installation
process, touch any of the unpainted metal surfaces on
your computer’s frame before handling and installing
memory.

6. Using your system’s owner’s manual, locate your
computer’s memory expansion slots. Do not use any
tools in the removal or installation of memory modules.

7. Insert your new memory module(s) in accordance with
the illustrations in this guide. Align the notch(es) on the
module with the notch(es) in the slot, and then press the
module down until the clips on the slot snap into place.
(It can take 20 to 30 pounds of pressure to install a
module.) Fill the memory slots on your computer starting
with the highest density (i.e. put the highest density
module in bank 0).

8. Once the module(s) have been installed, replace the
cover on your computer and reconnect the power cord or
battery. Installation is now complete.

DIMM installation

Using firm, even pressure, push DIMM into slot until

clips snap into place. Do not assist clips.

SODIMM installation

Firmly push the SODIMM in at a 45-degree angle,

When it is fully seated in the slot, one-sixteenth of an inch or less

and then push down until clips snap into place.

of the gold pins will be visible.

2