C.R.Plastic Products T04 User Manual

Product: Adirondack Side Table (T04)

Your purchase and who is C. R. Plastic Products Inc?

Parts: You will need:

1. Table Top 1. Drill

2. Lower Shelf 2. #2 Robertson or Phillips

3. Front Leg Assembly screw driver bit

4. Rear Leg Assembly

5. Assembly Instructions and Screws (5 - 1½" and 4 - 2")

1)

2)

C. R .Plastic Products Inc. is an environmentally conscious Canadian company. Our "Generation Line" of
recycled furniture will give you years of comfort, style and maintenance free enjoyment. You will find your
furniture to be waterproof and durable. By choosing this product, you are saving generations of trees and are
reducing the burden on our landfill sites. Thank-you for purchasing from C. R. Plastic Products Inc.

Step 1:Secure the Legs to the Table Top by locating the
leg assembly over the Table Brace and installing 1-2"
screw per leg into the frame. The brace between the legs
should be at the bottom of the table

Step 2: Position the Lower Shelf on the Frame and align
the scribed line with the inside edge of the rear leg brace.
Centre the shelf on rear brace and Install 1 - 1½" screw
into the shelf through one of the rear brace holes. Ensure
the shelf is centred on the Front Leg brace and install 1 ­1½ screw into the centre hole before installing the
remaining 3 - 1½" screws.

Proudly Made In CANADA