Crown Steam ECTS-12 Operator’s Manual
INSTALLATION & OPERATION
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read
the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this
manual for the life of the equipment:
Model #: ___________________________
Serial #: ___________________________
Date Purchased: ____________________
MANUAL
Electric Counter Tilting Skillet
ECTS-12
WARNING
CROWN FOOD SERVICE EQUIPMENT
Division of Middleby Canada Company Inc.
70 Oakdale Road, Downsview (Toronto) Ontario, Canada, M3N 1V9
MANUAL 10011R3
Telephone: 919-762-1000 www.crownsteamgroup.com
Printed in Canada
INSTALLATION & OPERATION MANUAL, ELECTRIC COUNTER TILTING SKILLET, ECTS-12
IMPORTANT NOTES FOR INSTALLATION AND OPERATION
It is recommended that this manual be read thoroughly and that all instructions be followed
carefully. This manual should be retained for future reference.
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
WARNING: Improper installation, operation, adjustment, alteration,
service or maintenance can cause property damage, injury or death.
Read the installation, operating and maintenance instructions
thoroughly before installing, operating or servicing this equipment.
NOTICE: Contact the factory, the factory representative or local service
company to perform maintenance and repairs.
Intended for commercial use only. Not for household use.
Do not attempt to operate this unit in the event of a power failure.
Adequate clearances must be maintained for safe and proper operation.
This manual should be retained for future reference.
Part No. 10011R3 2 2013-01-14
INSTALLATION & OPERATION MANUAL, ELECTRIC COUNTER TILTING SKILLET, ECTS-12
TABLE OF CONTENTS
DESCRIPTION PAGE
Important Notes for Installation and Operation .................................... 2
Installation and Service Connections ........................................... 4
1.0 Installation Instructions ................................................. 5
2.0 Operating Instructions .................................................. 6
3.0 Cleaning Instructions ................................................... 7
4.0 Troubleshooting ....................................................... 7
Part No. 10011R3 3 2013-01-14
Loading...