Series BSI - Bermuda Features
BERMUDA
CAST IRON HEAT EXCHANGER
STAINLESS STEEL BURNERS
BUILT-IN DRAFT DIVERTER TO FIT LOW SPACES
AUTOMATIC VENT DAMPER INCLUDED *
ATTRACTIVE, RUGGED JACKET
FULLY ASSEMBLED OR AVAILABLE AS KNOCK-DOWN PACKAGE
TEN SIZES FROM 69,000 TO 379,000 BTU
TEN SIZES FROM 69,000 TO 379,000 BTU
DESIGNED FOR INSTALLATION ON COMBUSTIBLE FLOORS
* BSI069 THROUGH BSI276
CrownBoiler.com
Constructed and tested
in accordance with
ASME Section IV
* BSI345 and BSI379 not available for use with LP gas.
** Combuson efficiency
*** Volume to normal water line
All residential cast iron boilers include a full one year
warranty. A 12 year limited warranty is provided for the
cast iron heat exchanger. A 5 year and a 10 year
extended warranty covering parts and labor are also
available. Visit CrownBoiler.com for complete
details.
1. ALTITUDES ABOVE 2,000 FT. RATINGS SHOULD BE REDUCED AT A RATE OF 4% FOR EACH 1,000 FT. ABOVE SEA LEVEL USA ONLY
2. BSI345 AND BSI379 NOT AVAILABLE FOR ELEVATIONS ABOVE 2,000 FT.
3. SPECIFICATIONS AND DIMENSIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
ADDITIONAL FEATURES / BENEFITS
• Available in standing pilot or electronic ignition
• Available with natural or LP gas
• Probe low water cut-off standard; option of float
low water cut-off or low water cut-off / feeder combo.
• Isolation relay simplifies thermostat wiring
• Redundant gas valve
• Redundant gas valve
• Roll-out switch; spill switch
• Glass gauge set
CrownBoiler.com
PHILADELPHIA, PA
PN980531