Crown Boiler BB100I, BB100H, BB100C User Manual
BIMINI BUDDY
HYDRAULIC
SEPARATOR
Inside
View
Designed to be installed
with any wall-mounted
Bimini boiler.
Introducing the New Bimini Buddy
The Bimini Buddy, designed to be installed with any wall-mounted
Bimini Boiler, includes all near boiler piping needed for good
hydraulic separation and air elimination in a compact, factory
assembled package. In addition, some models include provisions
for domestic hot water production.
The BB100I and BB100C models utilize the circulator that comes
with the Bimini boiler so a separate DHW circulator isn’t required.
They also include a three way zone valve for domestic hot water
priority that is wired directly to the Bimini without the use of any
additional controls.
Three Bimini Buddy Models
BB100H - For heat only applications.
BB100I - For connection of a Bimini boiler
to a heating system and an indirect water
heater like the Mega-Stor.
BB100C - Combi unit with a plate heat
exchanger and ow switch for domestic
hot water production in tight places.
All Bimini Buddies have an attractive jacket and convenient
connections for the boiler system, air vent and expansion tank.
The Bimini Buddy has reversible piping so that it can be piped
either right or left of the boiler (factory piping is for installation
on right side of boiler.)
CrownBoiler.com
BB100H*
BIMINI BUDDY
TECHNICAL INFORMATION
BB100C*
BB100I*
*Expansion tank not included.
SPECIFICATIONS
MAX.
MODEL
BB100H 12” 19-3/4” 12-1/2” 24 LBS 11”
BB100I
BB100C 12” 19-3/4” 12-1/2” 30 LBS 11”
OPERATING
PRESSURE
50 PSI 200oF
Domestic Hot Water Output for
Bimini Buddy Models BB100C
Bimini Boiler
BWC070 1.53 1.32
BWC090 2.09 1.80
BWC120 2.70 1.84
BWC151 2.94 1.94
MAX.
OPERATING
TEMP.
Connuous Draw (GPM)
77oF Rise 90oF Rise
3-WAY VALVE
MOTOR
RATING
120VAC, 50/60
HZ, 6.5 W
FLOW
SWITCH
SET-POINT
0.50 GPM
FLOW SWITCH
CONTACT
RATINGS
20VA PILOT
DUTY AT 120VAC
DIMENSIONS
WIDTH HEIGHT DEPTH
12” 19-3/4” 12-1/2” 27 LBS 11”
WEIGHT
EXPANSION
TANK DIA.
MAX
Standard Equipment on BB100H and All Bimini Buddy Models
• Factory Assembled
• Deluxe Painted Cover with slots for wall mounting
• Hydraulic Separator with:
• Boiler, heating system, expansion tank and air elimination connections.
BB100C includes standard equipment as well as:
• Brazed Plate Heat Exchanger for domestic hot water
• 120 volt Three Way Zone Valve and Flow Switch for domestic hot water
priority
BB100I includes standard equipment as well as:
• 120 volt Three Way Zone Valve for domestic hot water priority
• Indirect Water Heater connections (1” copper)
CrownBoiler.com
PHILADELPHIA, PA
BB100 - 12/10 - 5M
PN 980099
Loading...