Crown Audio CM-700 User Manual

CM-SM

ACCESSORY SHOCK MOUNT ADAPTER FOR CM-700 MICROPHONE

he Crown® CM-SM is a mic-stand adapter that isolates a CM-700 microphone from mechanical vibra-

T

tion. It will also work with other 3/4-inch diameter mics that are similar to the CM-700 in weight and size.

Because of its elastic suspension, the shock mount reduces stand and ﬂ oor thumps by at least 22 dB (A weighted). For even more shock isolation, switch in the low-cut ﬁ lter on the CM-700.

A thumbwheel on the shock mount lets you clamp the mic cable. This keeps the mic oriented correctly and prevents cable noise from reaching the mic. The 5/8" 27 thread mates with standard American mic stands and booms.

Net weight: 4.3 ounces (122.5 grams). Included accessories: 8 replacement

rubber bands, part no. 100515-1. Threaded adapter for European mic stands (3/8" - 16) and photographic stands (1/4" -20). These two threads are on opposite ends of the unique reversible adapter, part no. D 7092-6.

Fig. 1

1.500” (3.81 cm) dia

1.750” (4.45 cm)

2.540” (6.45 cm)

3.250” (8.25 cm)

Fig. 2

1. Insert mic through

center of shock mount.

2. Trap cable under thumbwheel.

3. Balance mic fore/aft. Rotate mic to prevent skewing.

© 2005 Crown Audio®, Inc. Speciﬁ cations subject to change without prior notice. Latest information available at www.crownaudio.com. Crown and Crown Audio are registered trademarks of Crown International.

5/05 100897-1A