Crown SSTSBSC Brochure

SST-SBSC

he Crown® SST-SBSC modules are stereo
crossover networks with equalization
and summed bass output. Truly profes-

T

sional crossovers, SST-SBSC modules use
hard-wired precision components that stay
at the factory-set frequencies for consistent
bandwidth control.

SST (System Solution Topologies) modules
install into the back of Crown SST-compatible
amplifi ers, saving rack space and simplifying
system wiring.

For more details about the Crown SST-SBSC
modules, contact the Crown Technical Support
Group at 800-342-6939 or 574-294-8200.
Also, visit the Crown Audio website at
www.crownaudio.com.

Specifi cations

Signal to Noise (A-Weighted): Better than 85

dB below rated power.
Input Impedance: 20 k ohms balanced, 10 k

ohms unbalanced.

Output Impedance: 600 ohms balanced.
Total Harmonic Distortion (THD): 1 kHz rated

power, less than 0.1% true THD.

Crosstalk: > 50 dB from 20 Hz to 20 kHz.
Maximum Output: +18 dB into 600 ohms.

SYSTEM SOLUTION TOPOLOGIES

Features

• Stereo biamp and sub output

• Two in, fi ve out

• Mono summing of sub output for driving sub­woofers

• Certain modules have 2.8-kHz CD horn equal­ization

• Certain modules are designed specifi cally for
JBL ScreenArray™ loudspeakers

Table 1: SBSC MODULES CROSSOVER FREQUENCIES

MODEL

NUMBER

SBSCX1 80 800 800 16K 32 80 Y

SBSCX2 80 500 500 16K 32 80 Y

SBSCX12 32 120 120 20K 32 120 N

SBSCX17 32 350 350 20K 32 80 N

SBSCX19 32 1.25K 1.25K 20K 32 100 Y

SBSCX3632T 500 1.2K 1.5K 22.5K 35 450 Y

SBSCX4632T 250 1.2K 1.5K 22.5K 35 250 Y

SBSCJBL4675 32 1.2K 1K 22.5K 32 100 N

SBSCJBL5672 250 2.4K 2.5K 22.5K 32 300 N

LOW FREQUENCY HIGH FREQUENCY OUTPUT

HIGH PASS LOW PASS HIGH PASS LOW PASS HIGH PASS LOW PASS

CHANNEL 1 & 2 SUMMED SUB

• Neutrik® Combo input jacks

• Removable barrier block jacks for balanced
output to other components

• 18-dB/octave high-pass filter on sub and
18-dB/octave high-pass filter on low­frequency outputs

• 24-dB/octave low-pass filter on high­frequency outputs

CD

BOOST

Crown’s Three-Year, No-Fault, Fully Transferable Warranty

Crown offers a Three-Year, No-Fault, Fully Transferable Warranty for every new Crown amplifi er
product—an unsurpassed industry standard. With this unprecedented No-Fault protection, your
new Crown amplifi er product is warranted to meet or exceed original specifi cations for the fi rst
three years of ownership. During this time, if your unit fails, or does not perform to original
specifi cations, it will be repaired or replaced at our expense. About the only things not covered
by this warranty are those losses normally covered by insurance and those caused by intentional
abuse. And the coverage is transferable, should you sell your unit.

See your authorized Crown dealer for full warranty disclosure and details. For customers outside
of the USA, please contact your authorized Crown distributor for warranty information or call
574-294-8200.

Crown International
1718 W. Mishawaka Rd.
Elkhart, IN 46517-9439
TEL: [phone]
FAX: [phone]FAX
www.crownaudio.com

Specifi cations subject to change without prior notice. Latest
information available at www.crownaudio.com.

Crown and Crown Audio are registered trademarks of Crown
International, Inc. Other trademarks are the property of their
respective owners. Printed in U.S.A.

© 2005 Crown Audio

7/05 132298-1C

®

, Inc.