Crown RR 5200, RR 5200 Series Operator's Manual
Operator Manual
New Bremen, Ohio 45869 USA © 2001 PF12904-WEB Rev. 6/06 Printed in U.S.A.
RR 5200
S E R I E S
Th e mo st
im po rt an t
co mp on en t
is y ou .
RR 5200
S E R I E S
Thi s ope ra tor m anua l has
in forma tion f or all mo dels of
serie s RR p lus some optio ns
and acces sories. Some of the
il lu st ra tions and in fo rm at ion
ma y not app ly to you r truck.
All rights r eserved under I nternatio nal
and Pan A merican copyright conventions
Copyright 2001 Crown Equipment Corp.
1 Warning
It’s the law, you must be trained and certified to
operate this truck. (OSHA § 1910.178, Rev. 1999)
You or others around you can be seriously injured or even killed
if you don't use this truck correctly.
Read and obey all warnings and instructions in this Manual* and
on the truck.
Head, arms, hands, legs or feet outside the operator area can be
pinned or crushed whenever the truck is moving. Stay within the
operator area and stop the truck completely before getting off.
However, tipovers and falls from docks can cause serious injury
or even death. Immediately exit and move away from the truck
in these emergencies.
You can be trapped or crushed by driving the operator area under
racks or other objects. Look where you are going.
Inspect your truck before starting work, make sure it is in good
working order.
* Additional copies of this Operator Manual and all Truck Labels can be obtained
from Crown Equipment Corporation, New Bremen, Ohio 45869 U.S.A.
STOP
WARNING
You Must be Trained
You could be killed or seriously injured if you are not
adequately trained for lift truck operation!
Do not operate this truck in your work place until you
have been trained and certified by your employer.
You Must be Trained 2
IT'S THE LAW, YOU MUST BE TRAINED AND CERTIFIED
Federal law states that only properly trained operators are
permitted to operate a powered industrial truck and that
your employer must train you and certify that you are
qualified to operate this powered industrial truck.
(OSHA §1910.178, Rev. 1999)
Know the Hazards
Protect Yourself
3 Protect Yourself
DRIVE CAREFULLY
• Keep your hands on the controls and feet on the
pedals/pad. Keep your entire body in the operator area.
• Never stick a foot or any part of your body outside the
operator area, no matter how slow the truck is moving.
You cannot stop 3630 kg (8000 pounds) with any part
of your body. A foot or hand caught between the truck
and a fixed object will be crushed or even cut off.
• Stay away from the edge of docks and ramps. Make
sure dockboards are secure. Check that trailer wheels
are chocked. You could be seriously injured or even
killed in a fall from a dock or dockboard.
• Keep your truck under control at all times. Drive at a
speed that allows you to stop safely. Be even more
careful on slippery or uneven surfaces. Do not drive
over objects on the floor.
LOOK WHERE YOU'RE DRIVING
• Always be alert to the area around you and watch where
you are driving. You could be pinned or crushed by
objects intruding or poking into the operator area.
Protect Yourself 4
Know the Hazards
AVOID FALLS AND TIPOVERS
Falls from docks and tipovers are very serious accidents;
you can be crushed or even killed. Immediately exit and
move away from the truck in these emergencies.
Note: This is not like sit-down rider trucks, where it is
recommended that the operator stay with the truck.
The best way to prevent injury is to know where you are
at all times and follow the rules of safe truck operation.
• Be extremely careful when working around docks,
dockboards and trailers.
• Travel with the load or forks close to the ground and
tilted back. Watch for overhead obstructions. Perform
all truck movements smoothly and at a speed that will
give you time to react in an emergency.
• An unloaded truck can tip over also. Be just as careful
using an unloaded truck as you are using a loaded one.
USE YOUR TRUCK SAFELY
• Keep your hands and feet away from all moving parts
such as masts, chains, forks or wheels. Make sure the
overhead guard and load backrest are in place.
• Never stand on or under the forks, or allow anyone else
to stand on or under them. The only way to lift people
is with an approved platform. Never allow passengers
on the truck. There is no safe place for them.
• Before you leave your truck:
• Come to a complete stop and lower forks to the floor.
• Shut the truck off with the key or power disconnect.
07
Stay clear of all
moving parts.
Moving parts can
cut or crush hand s,
feet, arms or leg s.
WARNING
Capacity & Load Center
11 Capacity & Load Center
Capacity & Load Center 12
Know the Hazar
ds
Know the Hazards
KNOW YOUR LOAD
Do not exceed the capacity shown on your truck's capacity
plate. Be careful when handling long, high or wide loads.
Do not handle unstable loads.
EXCEEDING TRUCK CAPACITY CAN CAUSE AN ACCIDENT
Know the capacity of your truck as shown on your capacity
plate. Make certain you use the correct units of measure.
Pay attention to:
• Weight of load
• Load center
• Lift height
CENTER THE LOAD
Your truck could tip over if a load is shifted to the front
or side of a pallet or container. Make sure your load is
evenly distributed, stable and centered over the forks.
HYDRAULIC OPERATIONS CAN AFFECT STABILITY
Be careful when using reach, tilt, sideshift or other
operations. Remember that anytime the forks move, the
load moves also. This can affect stability. Perform all
hydraulic operations smoothly. (This also applies to any
attachments your truck may have.)
Capacity & Load Center
11 Capacity & Load Center
WHAT IS YOUR TRUCK CAPACITY?
Capacity is the load (including pallet
or container) that can be lifted to a given
height at a given load center. See the capacity
plate on your truck. Make certain you use the correct
units of measure.
WHAT IS LOAD CENTER?
Load center is the distance from the load backrest
or vertical face of the forks to the center of an
evenly distributed load.
LOADS MUST BE EVENLY DISTRIBUTED
Your truck could tip over, in any direction, if a
load is shifted to the front or side of a pallet or
container.
Load
Center
Center of evenly
distributed load
600mm
(
24in
) Max
Capacity & Load Center 12
332-001E
RR
Serial Numbe r
Attachm ent D ata
Truck Weight with Max. Battery
Capacit y wit h Mas t Vert ical
Load
Center
Units o f mea sure,
kg/mm
(lb/in)
Capacit y
Truck Type
Mast Collapsed Height
5200
SE RI E S
SAMPLE
5030(198)1360(3000) 600(24)
1590(3500)
600(24)3935(155)
2260(89)
3325(7331)
Sideshifter - 100mm (4 in)
E
1234-5678
600(24)
SAMPLE
Loading...