Crown Sit-down Rider Lift Truck FC 4500 Series, FC 4510/15-40, FC 4520/25-40 Specifications
Page 1
Specifications
FC 4500 Series
Sit-down Rider
Lift Truck
FC 4500
Series
Page 2
FC 4500 Series
Sit-down Rider
Lift Truck
14.6"
Page 3
* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
† With maintenance-free batteries or batteries with a lid (flat top), consult factory.
†† Based on TT mast.
FC 4500 Series
Specifications
General Information
1
Manufacturer
Crown Equipment Corporation
2
Model
FC 4510/15-40 FC 4520/25-40
3
Load Capacity*
lb 4000
4
Load Center
Fork Face to Load CG
in 24
5
Power
Electric
36-Volt / 48-Volt
6
Operator Type
Sit-down Rider Counterbalanced
7
Tire Type
Cushion
8
Wheels (x = driven)
Number Front/Rear
2x / 2
Dimensions
9
Mast (See Mast Chart)
Lifting Height (MFH)
in 188
Free Lift Height
in 32.2
12
Fork Carriage
ITA Class II
13
Forks
Standard L x W x T
in 36 x 4 x 1.8
Optional Lengths
in 42, 48, 54, 60
14
Tilt
F° / B°
degree 5 / 5
Interlocked Fork Height**
in 66
Battery Compartment
in 27 33
15
Headlength
Length to Fork Face
in 77.8 84
16
Width Overall
Standard Tread
in 43.4
Wide Tread
in 47.5
17
Height with Load Backrest
Mast Collapsed
in 83
18
Mast Extended
in 236
21
Turning Radius
in 69.1 75.3
22
Load Distance
Center of Wheel to Fork Face
in 15.8
23
Aisle Width (Add Load + Clear)
Right Angle Stack
in 84.9 91.1
Performance
24
Speed Travel
Empty / Loaded 48V
mph 11 / 10.2
Empty / Loaded 36V
mph 9 / 8.3
25
Speed Lift†† DC
AC
Empty / Loaded 48V
fpm 110 / 76
Empty / Loaded 36V
fpm 76 / 58
Empty / Loaded 48V
fpm 110 / 92
Empty / Loaded 36V
fpm 104 / 71
26
Speed Lower
Empty / Loaded
fpm 90
Weights
32
Weight, Less Battery
lb 7,243 7,195
33
Axle Load with Max Battery,
Loaded
Front
lb 11,987 11,752
Rear
lb 1,886 2,242
34
Axle Load with Max Battery,
Unloaded
Front
lb 4,787 4,851
Rear
lb 5,086 5,144
Chassis
36
Tires
Size Front
in 21 x 7 x 15
37
Size Rear
in 16 x 6 x 10.5
38
Wheelbase
in 49.7 54.7
39
Tread/Track Width
Front Standard / Rear
in 36.4 / 36
Front Optional / Rear
in 40.5 / 36
40
Ground Clearance, Loaded
Lowest Point
in 3
41
Center of Wheelbase
in 4.8
42
Grade Clearance, Loaded
% 38 35
43
Brakes
Service
Foot Hydraulic
44
Parking
Hand Electro-hydraulic
Battery
45
Battery
Type
Lead Acid
46
Capacity - 36V
AH 1210 1430
kWh 42.5 50.2
Capacity - 48V
AH 880 1100
kWh 41.2 51.5
47
Weight - Min
lb 2630 2800
Weight - Max
lb 3200 4000
Size - Max
Length 27.25 32.94
Width 38.69
Height 22.25
48
Battery Floor Height
With Rollers / w/o Rollers
in 17.4 / 17.1
Motors
49
Motors
Tractor Motor, dia
in 11.4
50
Lift Motor, dia
in 7.2
51
Operating Pressure
For Attachments
psi Up to 3000
Page 4
FC 4500 Series
Specifications
* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
† With maintenance-free batteries or batteries with a lid (flat top), consult factory.
†† Based on TT mast.
General Information
1
Manufacturer
Crown Equipment Corporation
2
Model
FC 4510/15-50 FC 4520/25-50 FC 4540/45-50
3
Load Capacity*
lb 5000
4
Load Center
Fork Face to Load CG
in 24
5
Power
Electric
36-Volt / 48-Volt
6
Operator Type
Sit-down Rider Counterbalanced
7
Tire Type
Cushion
8
Wheels (x = driven)
Number Front/Rear
2x / 2
Dimensions
9
Mast (See Mast Chart)
Lifting Height (MFH)
in 188
Free Lift Height
in 32.2
12
Fork Carriage
ITA Class II
13
Forks
Standard L x W x T
in 36 x 4 x 1.8
Optional Lengths
in 42, 48, 54, 60
14
Tilt
F° / B°
degree 5 / 5
Interlocked Fork Height**
in 66
Battery Compartment
in 27 33 36
15
Headlength
Length to Fork Face
in 81.2 84 87.1
16
Width Overall
Standard Tread
in 43.4
Wide Tread
in 47.5
17
Height with Load Backrest
Mast Collapsed
in 83
18
Mast Extended
in 236
21
Turning Radius
in 71.9 75.4 78.0
22
Load Distance
Center of Wheel to Fork Face
in 15.8
23
Aisle Width (Add Load + Clear)
Right Angle Stack
in 87.7 91.2 93.8
Performance
24
Speed Travel
Empty / Loaded 48V
mph 10.9 / 9.9
Empty / Loaded 36V
mph 8.8 / 8.0
25
Speed Lift†† DC
AC
Empty / Loaded 48V
fpm 110 / 70
Empty / Loaded 36V
fpm 76 / 50
Empty / Loaded 48V
fpm 110 / 86
Empty / Loaded 36V
fpm 104 / 66
26
Speed Lower
Empty / Loaded
fpm 90
Weights
32
Weight, Less Battery
lb 8,090 7,736 7,454
33
Axle Load with Max Battery,
Loaded
Front
lb 13,616 13,641 13,456
Rear
lb 2,103 1,895 2,097
34
Axle Load with Max Battery,
Unloaded
Front
lb 4,616 5,014 4,829
Rear
lb 6,104 5,522 5,724
Chassis
36
Tires
Size Front
in 21 x 8 x 15
37
Size Rear
in 16 x 6 x 10.5
38
Wheelbase
in 49.7 54.7 54.7
39
Tread/Track Width
Front Standard / Rear
in 35.4 / 36
Front Optional / Rear
in 39.5 / 36
40
Ground Clearance, Loaded
Lowest Point
in 3
41
Center of Wheelbase
in 4.8
42
Grade Clearance, Loaded
% 38 35 35
43
Brakes
Service
Foot Hydraulic
44
Parking
Hand Electro-hydraulic
Battery
45
Battery
Type
Lead Acid
46
Capacity - 36V
AH 1210 1430 1650
kWh 42.5 50.2 57.9
Capacity - 48V
AH 880 1100 1210
kWh 41.2 51.5 56.6
47
Weight - Min
lb 2630 2800 3100
Weight - Max
lb 3200 4000 4250
Size - Max
Length 27.25 32.94 36.38
Width 38.69
Height 22.25
48
Battery Floor Height
With Rollers / w/o Rollers
in 17.4 / 17.1
Motors
49
Motors
Tractor Motor, dia
in 11.4
50
Lift Motor, dia
in 7.2
51
Operating Pressure
For Attachments
psi Up to 3000
Page 5
FC 4500 Series
Specifications
* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
† With maintenance-free batteries or batteries with a lid (flat top), consult factory.
†† Based on TT mast.
General Information
1
Manufacturer
Crown Equipment Corporation
2
Model
FC 4520/25-55 FC 4540/45-55
3
Load Capacity*
lb 5500
4
Load Center
Fork Face to Load CG
in 24
5
Power
Electric
36-Volt / 48-Volt
6
Operator Type
Sit-down Rider Counterbalanced
7
Tire Type
Cushion
8
Wheels (x = driven)
Number Front/Rear
2x / 2
Dimensions
9
Mast (See Mast Chart)
Lifting Height (MFH)
in 188
Free Lift Height
in 32.2
12
Fork Carriage
ITA Class II
13
Forks
Standard L x W x T
in 36 x 5 x 1.8
Optional Lengths
in 42, 48, 54, 60
14
Tilt
F° / B°
degree 5 / 5
Interlocked Fork Height**
in 66
Battery Compartment
in 33 36
15
Headlength
Length to Fork Face
in 87.4 90.5
16
Width Overall
Standard Tread
in 45.2
Wide Tread
in 48
17
Height with Load Backrest
Mast Collapsed
in 83
18
Mast Extended
in 236
21
Turning Radius
in 78.2 80.9
22
Load Distance
Center of Wheel to Fork Face
in 15.8
23
Aisle Width (Add Load + Clear)
Right Angle Stack
in 94.0 96.7
Performance
24
Speed Travel
Empty / Loaded 48V
mph 10.8 / 9.7
Empty / Loaded 36V
mph 8.8 / 7.8
25
Speed Lift†† DC
AC
Empty / Loaded 48V
fpm 110 / 68
Empty / Loaded 36V
fpm 76 / 47
Empty / Loaded 48V
fpm 110 / 81
Empty / Loaded 36V
fpm 104 / 62
26
Speed Lower
Empty / Loaded
fpm 90
Weights
32
Weight, Less Battery
lb 8,285 8,166
33
Axle Load with Max Battery,
Loaded
Front
lb 14,308 14,111
Rear
lb 2,277 2,655
34
Axle Load with Max Battery,
Unloaded
Front
lb 4,818 4,622
Rear
lb 6,267 6,644
Chassis
36
Tires
Size Front
in 21 x 9 x 15
37
Size Rear
in 16 x 7 x 10.5
38
Wheelbase
in 54.7 54.7
39
Tread/Track Width
Front Standard / Rear
in 36.2 / 36
Front Optional / Rear
in 39 / 36
40
Ground Clearance, Loaded
Lowest Point
in 3
41
Center of Wheelbase
in 4.8
42
Grade Clearance, Loaded
% 35 35
43
Brakes
Service
Foot Hydraulic
44
Parking
Hand Electro-hydraulic
Battery
45
Battery
Type
Lead Acid
46
Capacity - 36V
AH 1430 1650
kWh 50.2 57.9
Capacity - 48V
AH 1100 1210
kWh 51.5 56.6
47
Weight - Min
lb 2800 3100
Weight - Max
lb 4000 4250
Size - Max
Length 32.94 36.38
Width 38.69
Height 22.25
48
Battery Floor Height
With Rollers / w/o Rollers
in 17.4 / 17.1
Motors
49
Motors
Tractor Motor, dia
in 11.4
50
Lift Motor, dia
in 7.2
51
Operating Pressure
For Attachments
psi Up to 3000
Page 6
* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
† With maintenance-free batteries or batteries with a lid (flat top), consult factory.
†† Based on TT mast.
FC 4500 Series
Specifications
General Information
1
Manufacturer
Crown Equipment Corporation
2
Model
FC 4520/25-60 FC 4540/45-60
3
Load Capacity*
lb 6000
4
Load Center
Fork Face to Load CG
in 24
5
Power
Electric
36-Volt / 48-Volt
6
Operator Type
Sit-down Rider Counterbalanced
7
Tire Type
Cushion
8
Wheels (x = driven)
Number Front/Rear
2x / 2
Dimensions
9
Mast (See Mast Chart)
Lifting Height (MFH)
in 180
Free Lift Height
in 32.2
12
Fork Carriage
ITA Class III
13
Forks
Standard L x W x T
in 36 x 5 x 1.8
Optional Lengths
in 42, 48, 54, 60
14
Tilt
F° / B°
degree 5 / 5
Interlocked Fork Height**
in 66
Battery Compartment
in 33 36
15
Headlength
Length to Fork Face
in 87.7 90.8
16
Width Overall
Standard Tread
in 45
Wide Tread
in 48
17
Height with Load Backrest
Mast Collapsed
in 83
18
Mast Extended
in 228
21
Turning Radius
in 78.2 80.9
22
Load Distance
Center of Wheel to Fork Face
in 16.1
23
Aisle Width (Add Load + Clear)
Right Angle Stack
in 94.3 97.0
Performance
24
Speed Travel
Empty / Loaded 48V
mph 10.8 / 9.5
Empty / Loaded 36V
mph 8.8 / 7.6
25
Speed Lift†† DC
AC
Empty / Loaded 48V
fpm 110 / 66
Empty / Loaded 36V
fpm 76 / 43
Empty / Loaded 48V
fpm 110 / 76
Empty / Loaded 36V
fpm 104 / 57
26
Speed Lower
Empty / Loaded
fpm 90
Weights
32
Weight, Less Battery
lb 8,687 8,226
33
Axle Load with Max Battery,
Loaded
Front
lb 15,364 15,078
Rear
lb 2,124 2,248
34
Axle Load with Max Battery,
Unloaded
Front
lb 4,984 4,699
Rear
lb 6,503 6,627
Chassis
36
Tires
Size Front
in 21 x 9 x 15
37
Size Rear
in 16 x 7 x 10.5
38
Wheelbase
in 54.7 54.7
39
Tread/Track Width
Front Standard / Rear
in 36.2 / 36
Front Optional / Rear
in 39 / 36
40
Ground Clearance, Loaded
Lowest Point
in 3
41
Center of Wheelbase
in 4.8
42
Grade Clearance, Loaded
% 35 35
43
Brakes
Service
Foot Hydraulic
44
Parking
Hand Electro-hydraulic
Battery
45
Battery
Type
Lead Acid
46
Capacity - 36V
AH 1430 1650
kWh 50.2 57.9
Capacity - 48V
AH 1100 1210
kWh 51.5 56.6
47
Weight - Min
lb 2800 3100
Weight - Max
lb 4000 4250
Size - Max
Length 32.94 36.38
Width 38.69
Height 22.25
48
Battery Floor Height
With Rollers / w/o Rollers
in 17.4 / 17.1
Motors
49
Motors
Tractor Motor, dia
in 11.4
50
Lift Motor, dia
in 7.2
51
Operating Pressure
For Attachments
psi Up to 3000
Page 7
FC 4500 Series
Technical Information
17. Color-coded wiring
18. InfoPoint
®
System with
Quick Reference Guide
19. Three-spool valve
20. O-ring face seal
hydraulic fittings
21. Battery disconnect handle
22. Lift interrupt
Optional Equipment
1. AC Hydraulics
2. Sideshifter
3. Freezer and corrosion
conditioning
4. UL “EE” rating
5. InfoLink® Ready System
6. TL and quad mast styles
7. Polished and tapered forks
8. Fork lengths
9. Hydraulic valves for
attachments
10. Quick disconnect
hydraulic connectors
11. Attachment pressure
regulator and gauge
12. Special forward tilt
13. Brush wear and motor overtemperature indicators for
DC motors
14. Adjustable armrest
15. Steering spinner knob
16. Keyless on/off switch
17. Work lights
18. Storage tray with
clipboard support
19. Suspension Seat -
fabric or vinyl
20. Tilt Position Assist
21.
Urethane covered control
handles with tactile feedback
(3" shorter)
22. Back-up, brake and tail light
23. Strobe lights
24. Audible travel alarm
25. Tow pin
26. Automatic parking brake,
(seat activated)
27. Brake activated
traction cutout
28. Foot operated
directional control
29. Full battery side doors
30. Battery compartment rollers
31. Dock Performance Package
32. Pos/Neg accessory cable
33. Wide tread widths
34. Load backrest heights
35. Drive-in rack
overhead guard
36. Non-marking smooth or
lug rubber tires
37. Work Assist® Accessories
• Clippadandhook
• Accessoryclamp
• Terminalmounting
• Fireextinguisher
• Operatorfan
• Worklights
• Mirrors
38. Battery spacer
39. Crown FlexSeat - vinyl
Standard Features
1. Crown’s Access 1 2 3
®
Comprehensive
System Control
2. Intrinsic Stability System™
•Travelspeedreduction
when above mast staging
•Forwardtiltinterlock
above staging
•Counterweightexceeds
required standards
•Rampspeedcontrol
3. Operator entry/exit
•18"stepheight
•Largeentry/exit“window”
•Tubularoverheadguard
upright for easy hand hold
•Contouredbattery
seat deck
•Roundedfloorboardedges
•Tiltsteeringwheeland
sculpted column
•Large,unclutteredfloor-
board
4. Operator compartment
design features
•Lowcowlforforkand
floor visibility
•Widevisibilitywindow
between overhead guard
and front pillars
•CrownFlexSeat™-fabric
with hip restraint and
anti-cinch seatbelt.
•Infiniteadjustmentsteering
wheel column
•Fingertipapplied/released
parking brake with tone alert
•Nyloncontrol
handles with
tactile feedback
•
Natural position for forward/
reverse selector
•Rubberfloormat/rubber
covered pedals
5. AC traction system
6. Exclusive Crown power disc
brake with regenerative
motor plugging
7. Crown-manufactured
lift motor
8. 36/48-volt system
9. Crown display
•
Battery discharge indicator
with lift interrupt and
re-key feature
•
Hour meters/travel
distance/stop watch
•
Pin code access capable
•
Event code display with
five (5) key navigation
•
Access 1 2 3 diagnostics
•
P1, P2, P3 Performance
tuning
10. High visibility mast with
in-line hose routing
11. Waterfall design
overhead guard
12. Lift out or side removal
battery access
13. Battery side retainer
with interlock and
fault identification
14. No tool lift out floorboards
15. 48" high load backrest
16. 350 amp battery connector
FC 4500 Series
Specifications
Mast Chart FC 4500-40/50/55 TL TT QUAD
9
Lifting Height
in 126 138 150 188 206 216* 231* 246* 258* 276* 291* 240* 258* 276* 294* 312*
11
Free Lift Height†
in 5.6 5.6 5.6 32.2 38.2 44.2 50.2 56.2 62.2 68.2 74.2 31.8 39.8 43.8 49.8 55.8
14
Interlocked Fork Ht
in 78 78 78 66 72 78 84 90 96 102 108 76 82 88 94 100
17
Mast Collapsed Ht
in 83 89 95 83 89 95 101 107 113 119 125 83 89 95 101 107
18
Mast Extended Ht†
in 174 186 198 236 254 264 279 294 306 324 339 288 306 324 342 360
Mast Chart FC 4500-60 TL TT
9
Lifting Height
in 118 130 142 180 198 208* 223* 238* 250*
11
Free Lift Height†
in 5.9 5.9 5.9 32.2 38.2 44.2 50.2 56.2 62.2
14
Interlocked Fork Ht
in 78 78 78 66 72 78 84 90 96
17
Mast Collapsed Ht
in 83 89 95 83 89 95 101 107 113
18
Mast Extended Ht†
in 166 178 190 228 246 256 271 286 298
* Wide tread drive tires recommended. Refer to capacity charts.
† Includes load backrest.
Page 8
FC 4500 Series
Technical Information
Driveability
The FC 4500 benefits from
Crown’s design and engineering
excellence. Numerous features
improve operator comfort
and productivity.
A low 18" step height first greets
the operator. A low, streamlined
battery cover helps the operator
glide into the truck’s seat. The
overhead guard is shaped to
open up the entry/exit window
and its tubular design provides a
comfortable hand grip location for
a variety of operator heights. The
compact tilt steer column and
steer wheel further facilitate
entry/exit. Tilt column is spring
loaded to easily move up and
away. Floorboard (625-sq in) is
uncluttered and rubber covered
to insulate the operator from
vibration. Sculpted floorboard
design promotes visibility to the
drive tires, which can reduce
product and pallet damage. Brake
pedal effort is reduced. Pedal to
pedal and floor to pedal relationships are refined for comfort.
Better visibility can be seen
everywhere you look. A low
cowl for fork and carriage
visibility, a high visibility mast,
a compact steer column, a
sculpted floorboard and a
“waterfall” overhead guard all
contribute to superior visibility.
Control handles are crafted into
the compartment and “fanned” for
easy selection. They are
urethane covered with tactile
feedback for comfort and easy
selection. Control actuation forces
are minimal and responsive.
Finger applied/released parking
brake with tone alert enhances
operator entry/exit and naturally
encourages its use. Battery
disconnect is easy to reach and
operate. Easy to actuate rockertype switches are conveniently
located to select optional work
lights or fan. A large convex horn
button is housed in the center of
the wheel.
Crown Drive System
Crown has applied the latest
generation AC drive system,
enhanced with Access 1 2 3
®
technology. The demand for
high efficiency systems that
closely match customer torque
requirements is met with this
generation control system.
Drive motor is transversemounted high above the floor
away from dirt and moisture.
Heavy-duty triple reduction, all
gear design operates in oil bath.
Engineered for durability with
reduced vibration and noise.
Crown’s Access 1 2 3
technology provides optimum
performance and control by
offering a communication
interface for both operators
Crown Manufactured
Mast Assembly
Large, rugged mast trunnion
mount on drive axle and extra
heavy tilt cylinders with self-aligning bushings secure mast.
High visibility mast features
nested-rail design with lift
cylinders positioned behind
the rails. Heavy-duty mast is
engineered to provide smooth
reliable operation. Large hydraulic hose reeves and hose placement are engineered to reduce
hose wear and increase hose
life. Hose routing places hoses
in-line versus side-by-side to
reduce visual interference. Large
lift chains are used for long reliable service life. Large diameter
lift cylinders provide smooth
operation.
Class II and III fork carriages are
available. Optional TL and quad
mast is available.
Hydraulics
Premium hydraulic function
control valve provides precise
metering of lift, tilt and accessory functions. Compensating
section in the valve provides
repeatable function speed
regardless of load condition.
Hydraulic lever actuation is
minimal, reducing stress.
Compensating section also
improves overall system efficiency.
Tilt compensator prevents tilt
from lunging or speeding up when
doing simultaneous functions.
Crown lift/tilt interlock system
provides extended forward tilt
at low fork heights, reduced
forward tilt at elevated heights
to improve truck stability when
forks are elevated.
The control valves’ modular
design allows easy addition of
accessory functions. Maximum
lowering speed is limited by
pressure compensating flow
control valve and velocity fuses.
Integrated hydraulic cylinder
cushions soften mast staging.
and technicians, intelligent
coordination of lift truck
systems and simplified service
with advanced diagnostics.
The Crown display is used for
easy troubleshooting, access
event history and set performance features. A distribution
panel is conveniently located
with all test points, control
fuses and central wiring for
easy troubleshooting.
Three modes of performance
can be selected to accommodate operator experience or
application requirements.
Crown Power Brake System
Service brakes are located in the
wheel ends with a unique full
circle power disc design.
Hydraulic power is utilized to
actuate a full circle rotor. This
design reduces operator pedal
effort and improves brake
response. Brake service life
is increased due to a
large full
circle friction pad. Access
to the
friction pads for inspection or
replacement is direct and easy,
reducing downtime for brake
maintenance. Parking brake
is activated by a push button
located on the cowl to the right
of the steer wheel column.
Tone alert reminder is standard.
Parking brake is located on the
end of the motor shaft to take
advantage of gear reduction.
Optional seat activated automatic parking brake is available.
Steering
Fully hydrostatic system with
equal area, double-acting
cylinder provides equally responsive steering rate both ways
(4.8 turns lock to lock). Rugged
axle frame; forged spindle and
connecting links eliminate the
need for adjustment. One-piece
forged spindle and kingpin
in tapered roller bearings for
improved life and serviceability.
Spherical bearings with tapered
pins in connecting links eliminate
any play in linkage. All bearing
locations are sealed to exclude
contaminants and are equipped
with lubrication fittings for ease
of service. Axle articulates in
rubber isolation bushing to
improve truck handling and ride.
All lift cylinder rams are plated
and retract into the hydraulic oil
for additional corrosion protection when forks are lowered.
The steel oil reservoir is integral
to the frame which helps to dissipate hydraulic oil heat. This
clean, leak-free design includes
suction strainer with separate,
easily accessible fill port and
dipstick with filtered breathers.
Oil is returned through a replaceable spin-on type oil filter.
Batteries
Battery deck lid releases easily
to expose battery for lift out or
side battery removal. Optional
battery rollers for use with
mechanized extraction equipment. A low battery side retainer
is standard. Full battery side
doors are optional.
Other Options
1. Audible travel alarm
2. Flashing lights
Safety considerations and
dangers associated with
audible travel alarms and
flashing lights include:
• Multiplealarmsand/orlights
can cause confusion.
• Workersignorethealarms
and/or lights after day-in and
day-out exposure.
• Operatormaytransferthe
responsibility for “looking out”
to the pedestrians.
• Annoysoperatorsand
pedestrians.
Other Options Available
Contact your local Crown dealer.
Dimensions and performance
data given may vary due to
manufacturing tolerances.
Performance is based on an
average size vehicle and is
affected by weight, condition of
truck, how it is equipped and the
conditions of the operating area.
Crown products and specifications are subject to change
without notice.
Because Crown is continually improving its products,
specifications are subject to change without notice.
Crown, the Crown logo, the color beige,
the Momentum symbol, Access 1 2 3,
InfoPoint, Intrinsic Stability System, FlexSeat,
InfoLink and Work Assist are trademarks of
Crown Equipment Corporation.
Copyright 2007-2010 Crown Equipment Corporation
SF14837 Rev. 9/10
Printed in U.S.A.
Crown Equipment Corporation
New Bremen, Ohio 45869 USA
Tel 419-629-2311
Fax 419-629-3796
crown.com
You can count on Crown to build lift trucks
designed for safe operation, but that’s
only part of the safety equation. Crown
encourages safe operating practices through
ongoing operator training, safety-focused
supervision, maintenance and a safe working
environment. Go to crown.com and view our
safety section to learn more.
Loading...