Crown CDi 2000, CDi 4000, CDi 6000 Datasheet

CDi Series

• Switch-mode universal power supply

• Onboard digital signal processing
(DSP) includes crossovers, EQ
filters, delay, and output limiting

• Up to 20 user-defined DSP
presets are available

• Accurate, uncolored sound with
very low distortion for the best in
music and voice reproduction

• Extremely versatile; rated

for 2Ω, 4Ω, 8Ω loads and
70Vrms/140Vrms outputs

• Advanced protection circuitry guards
against: shorted outputs, open
circuits, DC, mismatched loads,
general overheating, high-frequency
overloads and internal faults

• Intuitive front-panel LCD screen
for quick, easy configuration

Features

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

CDi Series

\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

CAUTION – TO REDUCE THE RISK OF
ELECTRIC SHOCK, GROUNDING OF THE
CENTER PIN OF THE PLUG MUST BE
MAINTAINED.

CDi 1000, 2000, 4000

CDi 6000

Power Matrix

Model

Channels

2Ω 4Ω 8Ω 70Vrms 4Ω 8Ω 140Vrms

Dual (per ch.) Bridge

1000 2 700W* 500W 275W 500W 1400W* 1000W 1000W

2000 2 1000W* 800W 475W 800W 2000W* 1600W 1600W

4000 2 1600W* 1200W 650W 1000W 3200W* 2000W 2000W

6000 2 3000W* 2100W 1200W 2500W 6000W* 4200W 5000W

*With 1% THD

Performance Specifications

Sensitivity (for full rated

power at 4Ω)

Rated Power Output

(per Channel at 4Ω)

Signal to Noise Ratio
(below rated 1kHz power at

8Ω) (below rated 1kHz power
at 8Ω; A weighted)

Total Harmonic Distortion
(THD)

Damping Factor

(20Hz to 400Hz)

Frequency Response
(at 1W, 20Hz to 20kHz)

Crosstalk (below rated
power) 20Hz to 1kHz

Input Impedance (nominal)

Physical Specifications

Width

Height

Depth

Weight

1000 2000 4000 6000

1.3V 1.3V 1.3V 1.3V

500W Stereo 800W Stereo 1200W Stereo 2100W Stereo

100dB 100dB 100dB 100dB

<.05% <.05% <.05% <.05%

>500 >500 >500 >500

+0dB, –1dB +0dB, –1dB +0dB, –1dB +0dB, –1dB

>70dB >70dB >70dB >70dB

20kΩ balanced,

10kΩ unbalanced

19 in. (48.3 cm) 19 in. (48.3 cm) 19 in. (48.3 cm) 19 in. (48.3 cm)

3.5 in. (8.9 cm) 3.5 in. (8.9 cm) 3.5 in. (8.9 cm) 3.5 in. (8.9 cm)

12.5 in. (31.8 cm) 12.5 in. (31.8 cm) 12.5 in. (31.8 cm) 16.2 in. (41.1 cm)

22lbs (9.97kg) 22lbs (9.97kg) 22lbs (9.97kg) 30lbs (13.60kg)

20kΩ balanced,

10kΩ unbalanced

20kΩ balanced,

10kΩ unbalanced

20kΩ balanced,

10kΩ unbalanced

Specifications subject to change without prior notice. Latest information available at www.crownaudio.com. Crown offers a three-year, no-fault, fully transferable warranty for every new Crown amplifier – an unsurpassed industry standard. With this unprecedented no-fault protection, your new Crown
amplifier is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails, or does not perform to original specifications, it will be repaired or replaced at our expense. In most cases, the only things not covered by this warranty are those
losses normally covered by insurance and those caused by intentional abuse. Plus, the coverage is transferable, should you sell your amplifier. See your authorized Crown dealer for full warranty disclosure and details. For customers outside of the USA, please contact your authorized Crown distributors for

warranty information or call 574-294-8200. © 2015 Crown Audio®, Inc.