Crouzet 87621111, 87621112, 87621115, 87621122, 87621125 Data Sheet
...
Electronic multifunction counters with preselection
➜ Up counters / Down counters - 48 x 48 - CTR48
■ Counter, Tachometer, Chronometer, Multi-totalizer,
Batch counter, Preselection totalizer
■ Maximum input frequency 40 kHz
■ Simple parameter setting, configuration using text
menus
■ Easy modification of presets
■ Scaling factor
■ 5 A changeover relay and solid state output
■ Removable connectors
■ Backlit LCD display (orange) : 2 lines, 6 digits or
multicoloured display (green-red)
■ IP 65 sealed panel
■ Option of locking the keypad, completely or partially
(preset, programming)
■ Accessories for 72 x 72 or 55 x 55 cut-out,
DIN rail adaptor
Part numbers
Type Functions Preset Voltages Output Code
Orange
backlight LCD
display
Multicoloured
LCD display
(green-red)
Counter, Tachometer, Chronometer, Preselection
multi-totalizer
Counter, Tachometer, Chronometer, Preselection
multi-totalizer
Counter, Tachometer, Chronometer, Preselection
multi-totalizer
Counter, Tachometer, Chronometer, Multi-totalizer,
Batch counter, Preselection totalizer
Counter, Tachometer, Chronometer, Multi-totalizer,
Batch counter, Preselection totalizer
Counter, Tachometer, Chronometer, Multi-totalizer,
Batch counter, Preselection totalizer
Counter, Tachometer, Chronometer, Preselection
multi-totalizer
Counter, Tachometer, Chronometer, Preselection
multi-totalizer
Counter, Tachometer, Chronometer, Preselection
multi-totalizer
Counter, Tachometer, Chronometer, Multi-totalizer,
Batch counter, Preselection totalizer
Counter, Tachometer, Chronometer, Multi-totalizer,
Batch counter, Preselection totalizer
Counter, Tachometer, Chronometer, Multi-totalizer,
Batch counter, Preselection totalizer
1
1
1
2
2
2
1
1
1
2
2
2
10
24 V
90
10
24 V
90
10
24 V
90
10
24 V
90
Accessories
Description Code
Adaptor for 72 x 72 mm cut-out
Adaptor for 55 x 55 mm cut-out
DIN rail adaptor
c 1 changeover relay,
➞ 30 V
a 1 changeover relay,
a 1 changeover relay,
➞ 260 V
c 1 changeover relay,
➞ 30 V
a 1 changeover relay,
a 1 changeover relay,
➞ 260 V
c 1 changeover relay,
➞ 30 V
a 1 changeover relay,
a 1 changeover relay,
➞ 260 V
c 1 changeover relay,
➞ 30 V
a 1 changeover relay,
a 1 changeover relay,
➞ 260 V
1 solid state
1 solid state
1 solid state
1 NO relay, 2 solid state
1 NO relay, 2 solid state
1 NO relay, 2 solid state
1 solid state
1 solid state
1 solid state
1 NO relay, 2 solid state
1 NO relay, 2 solid state
1 NO relay, 2 solid state
87621111
87621112
87621115
87621121
87621122
87621125
87621211
87621212
87621215
87621221
87621222
87621225
26546842
26546846
26546841
General characteristics
Environmental characteristics
Supply
Relative humidity (no condensation) EN 60068-2-30 40/93% RLF
Altitude 0 < 2000 m
Certifications UL - cULus (pending) - CE
Vibration resistance in 3 axes 10-55 Hz / 1 min / XYZ EN 60068-2-6: 30 min. in each direction
Connection by screw terminals Removable
Protection Conforming to standard EN 60529 IP65 for panel / IP20 for connections
Front panel watertight seal
Temperature limits use (°C) -20 ➞ +65
Temperature limits stored (°C) -25
Weight (g)
General characteristics
Reset to zero or to preset On panel: if not locked during programming
Minimum pulse time Impulse counter: < 15 ms
Option to protect against reset from front panel
Scale factor (each input pulse is multiplied by this figure) 00.0001 ➞ 99.9999
Scaling factor (each input impulse is divided by this value) 01.0000
Decimal point selectable for ease of reading 0
Sensor supply version
Programming and current value backed up via EEPROM memory
Operating characteristics
Functions Preselection counter, Tachometer, Chronometer, Multi-totalizer, Batch
Number of presets 1 or 2
Display LCD with orange backlighting/Multicoloured LCD (green-red)
Height digits (mm) LCD 9
Display details - 999 999
Input characteristics
Inputs 2 counter inputs
Input modes Dir: Directional
Input type Voltage or solid state
High level
Low level
Solid state output characteristics
Maximum current 30 mA
Max. voltage
Relay output characteristics
Changeover relay
NO contact Depending on version
Maximum current 5 A
Minimum current 10 mA
Maximum voltage
Min. voltage
Response time < 13 ms
Mechanical life (operations)
Number of operations to 5 A
Output modes: maintained or pulsed 0.01 ➞ 99.99 s
a
10
✓
150 c version
250 a version
Electrical: automatic, voltage or solid state (NPN or PNP depending on
programming)
Chronometer: 500 μs
✓
0.0
0.00
0.000
0.0000
0.00000
24 Vc -20/+15% 50 mA
✓
Service life 10 years
counters, Totalizer
1 reset input, 1 gate input
AS: up/dn
AA: up/up
PP: phase
PP2: phase 2
PP4: phase 4
8 Vc
0
10
24 Vc -20/+15%
✓
30 Vc / 250 V
5 V
20 x 10
5 x 10
➞ 30 V
➞ +75
➞ 2 V
➞ 30 V
z
c
/ 24 V a / 90 ➞ 260 V
➞ 99.9999
➞ 999 999
c
➞ 30 V
c
c
for the c version
a
6
4
a
18
www.crouzet.com
www.crouzet.com
19
Loading...