Crouse Hinds Series 5 Bodies Covers and Gaskets Sales Brochure
Series 5
Die Cast Aluminum Conduit Outlet
Bodies, Covers and Gaskets
NEW!
Aluminum Covers •
with integral gaskets
X and TB •
confi gurations
SnapPack•
bodies and integral
gasketed covers!
™
with rigid
Series 5
Die Cast Aluminum Conduit Outlet Bodies, Covers and Gaskets
Series 5
Cooper Crouse-Hinds® Series 5 die cast copper-free aluminum conduit bodies, covers and
gaskets are available for use with rigid or EMT conduit (with set screw). Conduit bodies are
available in trade sizes 1/2"–4"; in the most popular conduit body shapes (C, LB, LL, LR, T)
and 1/2"–2" in TB & X shapes. The Series 5 family is available as components or pre-packaged
in various configurations as a SnapPackTM assembly. In addition, Series 5 is completely
interchangeable with other manufacturers.
APPLICATIONS
■
Act as pull outlets for conductors being installed
■
Provide openings for making splices and taps
in conductors
■
Act as mounting outlets for lighting fixtures and
wiring devices
■
Connect conduit sections
■
Provide taps for branch conduit runs
■
Make 90° bends in conduit runs
■
Provide for access to conductors for maintenance
and future system changes
FEATURES/BENEFITS
■
Die cast copper-free aluminum construction is
lightweight and corrosion resistant for long reliable
service
■
Epoxy powder coat finish provides additional
corrosion resistance in an aesthetically
pleasing appearance
■
Conduit bodies are supplied with threaded hubs
for use with Rigid/IMC conduit or as a combination
body (threaded and with set screws for use with
EMT or Rigid/IMC conduit on trade sizes)
■
Domed aluminum cover provides
additional cubic capacity
■
SnapPack
to match customer preferences.
TM
available in choice of 3 configurations
Available in
SnapPack™
assembly or
as components
to match
customer
preferences
• Integral gasket covers. The new sheet aluminum covers
feature a raised dome with stainless steel screws
supplied with nylon washers and a gasket
sket
for simplifying installation—reducing
inventory and labor costs. These
innovative covers are UL and cUL
Listed and are NEMA 4 Rated.
• SnapPackTM. Designed for ordering and receiving
convenience, the SnapPack combines a body, gasket, and
sheet aluminum cover in a single assembly.
Rigid body with traditional 1.
cover and gasket
(e.g. LB15 CGN)
STANDARD MATERIALS AND FINISHES
■
Bodies—Copper-Free Aluminum with epoxy
powder paint
■
Covers—Aluminum with stainless steel screws,
natural finish
■
Gaskets—Neoprene
3RD PARTY CERTIFICATIONS
■
UL Listed
■
cUL Listed
Combination body with 2.
traditional cover and gasket
(e.g. LB15 MTC )
NEMA 4 3. rigid body with
new
integral gasketed cover
(e.g. X15 ICG)
2
Loading...