Crouse Hinds LIQUIK LIQUIDTIGHT FITTINGS Catalog Page

LIQUIK™ LIQUIDTIGHT FITTINGS

No disassembly required! The Cooper Crouse-Hinds LiQuik
liquidtight fittings are quick and easy to install in just 2 steps,
offering huge labor saving potential. Available in trade sizes
3/8" – 2" straight insulated or non-insulated.

Traditional Assembly Installation

1. Slide nut over conduit.

2. Slide compression ring

over conduit.

3. Thread ferrule inside

the conduit.

Ordering Information

4. Slide the conduit assembly

inside body.

5. Slide compression nut and

ring toward the connector.

6. Tighten the nut.

New LiQuik Assembly Installation
In Just 2 Steps:

1. Slide conduit inside the fully

assembled connector.

2. Turn the connector assembly or

the conduit until the ferrule threads
engage the spirals in the conduit.
The pins in the ferrule are locked
inside the holes in the connector
body, preventing the ferrule from
turning. Tighten the nut against
the connector.

Done!

Li-Quik Liquidtight Fittings – straight, non-insulated

Trade Dim Dim Dim Dim

A

B

C

A

C

B

Catalog Number Size A (in.) B (in.) C (in.) D (in.)

LTQ38 3/8" 1/2 1 1/8 1/2 1 1/8

LTQ50 1/2" 1/2 1 1/4 1/2 1 1/4
LTQ75 3/4" 3/4 1 1/4 1/2 1 9/16
LTQ100 1" 1 1 7/16 5/8 1 13/16
LTQ125 1 1/4" 1 1/4 1 1/2 11/16 2 1/4

D

LTQ150 1 1/2" 1 1/2 1 5/8 3/4 2 7/16
LTQ200 2" 2 1 3/4 3/4 3

Li-Quik Liquidtight Fittings – straight, insulated

Trade Dim Dim Dim Dim
Catalog Number Size A (in.) B (in.) C (in.) D (in.)

LTQB38 3/8" 1/2 1 1/8 9/16 1 1/8
LTQB50 1/2" 1/2 1 1/4 9/16 1 1/4
LTQB75 3/4" 3/4 1 1/4 9/16 1 9/16
LTQB100 1" 1 1 7/16 11/16 1 13/16
LTQB125 1 1/4" 1 1/4 1 1/2 3/4 2 1/4
LTQB150 1 1/2" 1 1/2 1 5/8 13/16 2 7/16

D

LTQB200 2" 2 1 3/4 13/16 3

5