Crouse Hinds 7L Floodlights Catalog Page

Champ-PakTMWall Pack Luminaires

Cl. I, Div. 2, Groups A,B,C,D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups F & G Cl. III & Simultaneous Presence Marine & Wet Locations ɀ Enclosure Type 4X, IP66

The first low-profile wall pack designed specifically for hazardous areas.

The Cooper Crouse-Hinds®Champ-PakTMwall pack luminaire is ideal for low-profile mounting in hazardous and industrial environments. In

fact, it is suitable for any area with adverse conditions such as dust, dirt, moisture, vibration, high-pressure hosedowns and high thermal ambients. Its precisely designed glass refractor minimizes

fixture depth while providing uniform, glare-free illumination.

ɀ Unique compact shallow-profile design mounts virtually anywhere. ɀ Side-hinged cover with two-screw closing for easy installation and

maintenance. ɀ Gray Corro-free superior corrosion resistance. ɀ Unique stainless steel wire guard accessory attaches without any additional hardware for easy installation and maintenance.

ɀ Glass refractor provides uniform light distribution to eliminate glare. ɀ Vertical lamp design provides even lamp heat distribution for cooler

operation, providing expanded hazardous area suitability. ɀ Silicone gaskets make luminaire suitable for enclosure Type 4X, Marine and IP66 environments. ɀ Available in two different conduit entry configurations to permit flexible installation and mounting.

⁄4⍯ NPT hubs, one on each side

ɀ four

⁄2⍯ NPT hubs on bottom for feed-through applications

ɀ two

epoxy powder-coated two-piece housing provides

APPLICATIONS

ɀ indoor and outdoor wall mounting or

vertical surface mounting where minimal fixture depth is required in: ɀ manufacturing plants and heavy industrial facilities ɀ industrial process facilities such as refineries, chemical, petrochemical, pharmaceutical, and production platforms

ɀ waste or sewage treatment plants ɀ offshore, dockside and harbor

installations ɀ for security and safety lighting in industrial facilities ɀ for lighting of loading docks, tunnels and stairways ɀ for marine, wet location, hosedown and corrosive environments

ADDITIONAL FEATURES & BENEFITS

ɀ Variety of lamp types and wattages—HID, fluorescent and induction—to meet specific lighting needs. ɀ High-power-factor ballasts (+90%) are standard, which allow more luminaires per circuit. ɀ Up to 65°C ambient suitability on select lamp types and wattages. Ambient suitability of +40°C is standard. Allows for installation in higher ambient environments commonly found in industrial facilities. ɀ Low ambient starting capability (to

-40°C)—perfect for colder climates. ɀ Shock-absorbing HID mogul base lamp socket cushions lamp, improves lamp life in harsh environments.

ɀ Compact fluorescent emergency luminaire provides 90 minutes of lighting during power outages, meeting UL924 and life safety code. ɀ Cost-effective induction lamp system provides extra-long lamp life—up to 100,000 hours. Reaches full illumination immediately, providing crisp white light. ɀ NEC/CEC Restricted Breathing construction is available to provide cooler temperature classes (T codes) for expanded hazardous area suitability. ɀ Simplified method for compliance to NEC Restricted Breathing conduit sealing requirements makes installation easier.

867

Champ-PakTMWall Pack Luminaires

STANDARD MATERIALS

ɀ fixture housing and door frame assembly—copper-free aluminum ɀ external hardware—stainless steel ɀ refractor lens—borosilicate glass ɀ gasket—silicone ɀ reflector—aluminum light sheet ɀ wire guard—stainless steel

STANDARD FINISHES

ɀ aluminum—Corro-freeTMepoxy powder coat ɀ stainless steel—natural

CERTIFICATIONS & COMPLIANCES

Luminaires For Use With ANSI Lamps (Mogul Base)

ɀ UL/cUL Listed ɀ NEC and CEC Class I, Division 2 and Class I, Zone 2 ɀ Restricted Breathing Class I, Division 2 and Zone 2 (suffix S826) ɀ Class II, Groups F and G ɀ Class III ɀ Simultaneous Presence ɀ Certified for IEC Zone 2 (suffix S826TB) ɀ Wet Locations; Marine Locations; Enclosure Type 4X; IP66

UL Standards

ɀ 844—hazardous (divisions classified) locations ɀ 2279—hazardous (zones classified) locations ɀ 1598—luminaires ɀ 1598A—luminaires for marine vessels ɀ 924—emergency lighting (fluorescent emergency luminaire)

CSA Standards

ɀ C22.2 No. 9 and 137 ɀ CAN/CSA-E60079-15:02

IEC Standards

ɀ 60079-15

RATINGS (ELECTRICAL/SIZE)

Sources/Wattages

ɀ high-pressure sodium (HPS)—mogul base 50, 70, 100 & 150

ɀ metal halide (MH)—mogul base 70, 100 & 150 ɀ mercury vapor (MV)—mogul base 100 ɀ compact fluorescent 26, 32, 42, 52, 64 & 84 ɀ emergency fluorescent 26 ɀ induction 55 & 85

Voltages

HID STANDARD-VOLTAGE BALLASTS

ɀ Dual tap (120 & 277 V, 60 Hz—for 50 W HPS only)— prewired at 277 V

ɀ Multitap (120, 208, 240 & 277 V, 60 Hz)—prewired at 277 V ɀ Tritap (120, 277 & 347 V, 60 Hz)—prewired at 347 V ɀ 120 V, 60 Hz ɀ 480 V, 60 Hz

FLUORESCENT STANDARD-VOLTAGE BALLASTS

ɀ 120–277 V, 50–60 Hz ɀ 120 V, 50 Hz (for Canada only) ɀ 347 V, 60 Hz (for Canada only)

INDUCTION STANDARD-VOLTAGE BALLASTS

ɀ 120 V, 50–60 Hz (also 120 V DC) ɀ 230 V, 50–60 Hz (also 240 V DC)

HID OPTIONAL VOLTAGE BALLASTS

ɀ 220 V, 50 Hz ɀ 220 V, 60 Hz ɀ 240 V, 50 Hz

FLUORESCENT OPTIONAL VOLTAGE BALLASTS (Consult Factory)

ɀ 125 V DC ɀ 12 V DC ɀ 24 V DC

ISOLATED BALLASTS AND SPECIALS (Consult Factory)

ɀ 208 V, 60 Hz CWI Isolated Ballast ɀ 240 V, 60 Hz CWI Isolated Ballast ɀ 480 V, 60 Hz CWI Isolated Ballast

Conduit Entries

ɀ four 3⁄4⍯ NPT entries, one on each side, top and bottom (3 plugged)

⁄2⍯ NPT entries on bottom for feed-through (1 plugged)

ɀ two ɀ metric entries—consult factory

868

+ 2 hidden pages

Crouse Hinds 7L Floodlights Catalog Page

Specifications and Main Features

Frequently Asked Questions

User Manual