Crouse Hinds 6L nLLK Series Nonmetallic Flourescent Luminaires Catalog Page
nLLK Series Nonmetallic
Flourescent Luminaires
CI.I, Div. 2, Groups A,B,C,D
CI.I, Zone 2 Aex nA II
CI.II, Division 2, Groups F,G
Enclosure Type 4X
The Cooper Crouse-Hinds SpecOneTMnLLK Series Fluorescent
Luminaire is an ideal source of general illumination indoors or out, in
ordinary or hazardous environments. Its heavy-duty, nonmetallic
construction stands up to tough physical and environmental
demands, making it an excellent choice where dust, dirt, gas, vapor,
smoke, fumes, moisture, corrosive and wet conditions are present. As
with all SpecOne products, the nLLK luminaire meets the standards
and codes of regulating agencies throughout the world, which
simplifies product specifying for multinational users.
Wet Locations
UL and cUL Listed
ATEX Certified
6L
APPLICATIONS
nLLK series luminaires are used:
In indoor or outdoor, ordinary or
hazardous areas
Where a heavy-duty, nonmetallic luminaire
is required to hold up to tough physical
and environmental demands including
corrosives, water, dust and extreme
temperatures
ɀ manufacturing plants
ɀ heavy industrial facilities
ɀ industrial process facilities
ɀ refineries
ɀ chemical
ɀ petrochemical
ɀ pharmaceutical
ɀ waste water and sewage treatment plants
In areas where low mounting height,
immediate full illumination, and the even
light distribution associated with a linetype
light source are required
ɀ loading docks
ɀ tunnels
ɀ stairways
Where wet location or Type 4X protection
is required
ɀ dock areas
ɀ production platforms
In hosedown areas where cleanliness and
sanitation are prime factors
ɀ dairies
ɀ canneries
ɀ food processing plants
ɀ bottling plants
ɀ laboratories
CERTIFICATIONS &
COMPLIANCES
NEC
ɀ Class I, Division 2, Groups A, B, C, D
ɀ Class I, Zone 2 AEx nA II
ɀ Class II, Division 2, Groups F, G
ɀ Wet Locations
ɀ UL Listed
CEC
ɀ Class I, Zone 2 Ex nA II
ɀ Class I, Division 2, Groups A, B, C, D
ɀ Class II, Division I, Groups E, F, G
ɀ cUL Listed (certified by UL)
Enclosure
ɀ Type 4X
ɀ IP65
UL Standards
ɀ 2279 Hazardous (Zones Classified)
Locations
ɀ 1598 Luminaires
CSA Standards
ɀ C22.2 No. 9
ɀ CAN/CSA–E79-15
ATEX
ɀ ATEX Directive 94/9/EC
ɀ Type of Protection
ɀ EC-Type Examination
Certificate
ɀ EC-Type Examination
Certificate
STANDARD MATERIALS
ɀ one-piece housing—fiber-glass reinforced
polyester
ɀ lens—polycarbonate
ɀ gasket—silicone
STANDARD FINISHES
ɀ fiberglass housing—natural (white)
ɀ lens—natural (clear)
RATINGS (ELECTRICAL/
SIZE)
Sources/Wattages
ɀ two 17 W or two 32 W linear fluorescent
Voltages
ɀ 120–277 V, 50–60 Hz.
ɀ 347 V, 60 Hz.—consult factory
Hub Size
ɀ four 25 mm entries, two on each end, three
plugged
ɀ two Myers
adapter hubs provided standardfor throughfeed or tandem wiring
II 3 G
II 2 D/II 3 D T80°C
EEx nA II T4 nach EN 50021
PTB 96 ATEX 2208
DMT 02 ATEX E116
®
STM2 25 mm to 3⁄4⍯ NPT
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
849
6L
nLLK Series Nonmetallic
Flourescent Luminaires
IP65, Type 4X heavy-duty construction
ɀ nonmetallic body, gasketed lens and
unique labyrinth lens locking system
ɀ dust-tight, water-tight and moisture-tight
ɀ corrosion and impact-resistant
ɀ ideal for outdoor applications
Electronic ballast
ɀ lower ambient temperatures suitability to
-18°C
ɀ high–power factor ballast (+90%) allows for
more luminaires per circuit
Standard T8 bi-pin lamps—most common
lamp used; energy-efficient and cost-effective
Removable lens—hinged on both sides for
easy installation and maintenance
Easy wiring and installation—
ɀ four 25 mm entries. Two Myers
adapter hubs supplied standard
ɀ suitable for through-feed or tandem
applications
ɀ extra-large wire well eliminates need for
separate junction boxes
Worldwide suitability
ɀ NEC/CEC: Class I, Zone 2 and Division 2
areas
ɀ IEC/CENELEC certified luminaires
available. Consult factory.
®
3
⁄4⍯ NPT
CI.I, Div. 2, Groups A,B,C,D
CI.I, Zone 2 Aex nA II
CI.II, Division 2, Groups F,G
Enclosure Type 4X
Wet Locations
UL and cUL Listed
ORDERING INFORMATION
HUB SIZE* LAMP DESCRIPTION VOLTAGE/HZ. CATALOG NO.
3
⁄4⍯ NPT 17 W T8, Rapid Start—2 lamps 120–277 V, 60 Hz. nLLK98 2217/UNV
3
⁄4⍯ NPT 32 W T8, Rapid Start—2 lamps 120–277 V, 60 Hz. nLLK98 4232/UNV
25 mm entries—supplied with two Myers®STM2 25 mm to 3⁄4⍯ NPT adapter hubs.
*
ACCESSORIES
DESCRIPTION CATALOG NO.
SW13 hexagon key (for maintenance and lamp replacement) 3 2485 000 005
®
25 mm to 3⁄4⍯ NPT adapter hub STM2
Myers
MOUNTING ACCESSORIES
TYPE CORROSION PROTECTION PIPE DIN OUTER DIA.
Eyebolt A2 Galvanized 2 2 2480 002 000
Hexagon Screw S4
mounting bracket or pipe clamp to
luminaire)
Ceiling Mounting Bracket D92 Nickel Chromium 2 2 2480 092 000
Pipe Clamp R12 Hot Galvanized
Pipe Clamp R14 Nickel Chromium
Pipe Clamp R22 Hot Galvanized 1
Pipe Clamp R32 Hot Galvanized 2⍯ 56–60 mm 2 2 2480 482 000
(to attach ceiling
Nickel Chromium 2 2 2480 054 000
11
⁄4⍯ 38–42 mm 2 2 2480 462 000
11
⁄4⍯ 38–42 mm 2 2 2480 464 000
1
⁄2⍯ 47–51 mm 2 2 2480 472 000
QTY. PER
LUMINIARE CATALOG NO.
850
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
Loading...