6L
FVN Series
Flourescent Luminaires
FVN Luminaires are ideal for use:
ɀ In areas made hazardous by the abnormal conditions resulting in
the presence of flammable vapors or gases and combustible dusts as
defined by the National Electrical Code
ɀ Where broken lamps would damage machinery or processes, or
harm people working in the area.
ɀ In areas where stringent sanitation requirements exist.
Features
ɀ One-piece seamless sheet steel housing with welded end caps
keeps dirt, dust and moisture away from ballast and lamps. Easy to
clean.
ɀ A silicone rubber gasket provides a dust-tight seal between the
lens/frame assembly and housing.
ɀ Lens/frame assembly is hinged and wireway cover is held by safety
chain for ease of lamp replacement and maintenance.
ɀ Polyester powder coat finish provides high reflectance and corrosion
resistance for long life and dependable service.
1
⁄2” NPT pendant hubs and two 1⁄2” NPT thru-feed end hubs are
ɀ Two
standard.
ɀ Electronic ballast is standard on 32, 40(/UNV only) and 54 watt
luminaires.
FVN Fluorescent Luminaires with T5 HO lamps offer...
ɀ High lumen output per watt - provides energy savings versus other
higher wattage fluorescent luminaires with similar lumen output.
ɀ Longer lamp life and good lumen maintenance - reduced
maintenance and lamp replacement costs.
®
.
CI.I, Div. 2, Groups A,B,C,D
CI.I, Zone 2 Group IIC
Wet Locations
NEMA 3,3R
CI.II, Div. 1, Groups F,G
CI.III & Simultaneous Presence
Certifications and Compliances:
NEC and CEC:
ɀ Class I, Division 2 Groups A, B, C & D
ɀ Class I, Zone 2 Groups IIC
ɀ Class II, Division 1 Groups F, G
ɀ Class III
ɀ Simultaneous Presence (Cl. I and Cl. II)
UL Standards:
ɀ 844 Hazardous (Classified) Areas
ɀ 1598 Luminaires
CSA Standards:
ɀ C22.2 NO. 137
Standard Materials:
ɀ Luminaire housing - 20-gauge seamless sheet steel
ɀ Lens/Frame Assembly - stainless steel
ɀ Glass - 3/16” tempered
ɀ Suspension flanges - seamless sheet steel
ɀ Gaskets - silicone
ɀ Lamphoders - white thermoset plastic
ɀ Clamps - stainless steel
Standard Finishes:
ɀ Reflector housings - corrosion resistant white polyester powder coat
ɀ Lens/Frame - natural
Dimensions:
Ordering Information (Lamps not supplied): Supercedes ordering information in Catalog 6000, Section 5L.
Lamp
Watts
32 120-277/50-60 T8 1/2 NPT FVN4232TG/UNV FVN4332TG/UNV
32 347/60 T8 1/2 NPT FVN4232TG/347 FVN4332TG/347
40 120-277/50-60 T12 1/2 NPT FVN4240TG/UNV FVN4340TG/UNV
40 347/60 T12 1/2 NPT FVN4240TG/347 FVN4340TG/347
60 120/60 T12HO 1/2 NPT FVN4260TG/120 —
60 277/60 T12HO 1/2 NPT FVN4260TG/277 —
60 347/60 T12HO 1/2 NPT FVN4260TG/347 —
60 220/50 T12HO 1/2 NPT FVN4260TG/200-50 —
FVN Fluorescent Luminaires with T5 HO Lamps (Lamps not supplied)
54 120-277/50-60 T5HO 1/2 NPT FVN4254TG/UNV —
54 347/60 T5HO 1/2 NPT FVN4254TG/347 —
852
Line
Voltage/Hertz
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
Lamp
Type Hub Size 2-Lamp Cat. No. 3-Lamp Cat. No.
Loading...