Crouse Hinds 6L EVFDR Series Fluorescent Luminaires Catalog Page

6L

EVFDR Series
Fluorescent
Luminaires

Applications:

ɀ EVFDR luminaires are suitable for wet
locations and marine environments, above
and below deck, where hazardous vapors,
gases or dusts are present
ɀ Ideally suited for use on offshore drilling/
production platforms and on shipboard in
hazardous areas

ɀ For mounting where headroom is limited
ɀ For hazardous areas where watertightness

and corrosion resistance are required

Features:

ɀ Exterior surfaces finished with gray epoxy
enamel for corrosion resistance

ɀ Exterior hardware stainless steel
ɀ All joints sealed and gasketed for

watertightness
ɀ Vibration resistant

-shock mounts

-sockets are spring loaded for tight lamp

contact connection
ɀ Heavy duty glass lamp tubes for maximum
strength and impact resistance

ɀ All exterior materials are non-sparking
ɀ C-type beam clamps provide quick and

easy mounting
ɀ Luminaire is adjustable 30° either side of
fixture axis, allowing for control of light output
ɀ Beam clamp support is adjustable allowing
beam clamp to be located to suit structure
ɀ Low profile – luminaire height is 7
standard mounting, 11
mounting option – for maximum clearance
where headroom is critical
ɀ Provides cool light with natural color
rendition
ɀ Continuous and uniform illumination made
possible by mounting end to end (no space
needed between luminaires for relamping) –
see page 859 for relamping information
ɀ Relamping is accomplished without tools.
Quarter-turn fastener allows end of luminaire
to be lowered quickly. Cable supports end of
luminaire while relamping – both hands are
free. Threaded lamp tube cover provides
quick and easy access to lamp and
receptacle
ɀ Reflectors can be removed or replaced with
only a screwdriver

ɀ Ballast housing readily accessible
ɀ Minimum weight – copper-free aluminum

construction throughout
ɀ Type P ballast furnished in compliance with
NEC
ɀ Standard electronic ballast for 32 watt and
40 watt rapid start.
ɀ Standard energy efficient electromagnetic
ballast (40W slimline, 60W and 110W) is
standard.
ɀ Low temperature ballasts are standard on
32WT8, 40W slimline, 60W and 110W. 32 watt
and 40 watt low temperature ballasts are
rated for 0°F. 60 and 100 watt low
temperature ballasts are rated for –20°F.

11

⁄16⍯ with shock

Standard Materials:

ɀ Housing – copper-free aluminum
ɀ Exposed hardware – stainless steel

13

⁄16⍯ with

ɀ

Cl. I, Div. 1, Groups C,D

ɀ

Cl. I, Zone 1 Group IIB

ɀ

Cl. II, Div 1, Groups E,F,G

ɀ

Cl. III, Simultaneous Presence

Options:

ɀ Furnished with lamps – add suffix S714 to
Cat. No.
ɀ Furnished with safety cable for high
vibration areas - add suffix S715 to Cat. No.
ɀ Beam clamps with shock mounts are
available for ease of installation and
resistance to vibration – add suffix KIT40 to
Cat. No.
ɀ Beam clamps only – add suffix KIT41 to
Cat. No.
ɀ Low Temperature Electromagnetic Ballast:
40W rapid start rated 0°F - add suffix BY to
Cat. No.
ɀ Emergency lighting battery unit – add suffix

S799 to Cat. No.

Size Ranges:

ɀ 2-lamp only

Electrical Rating Ranges:

ɀ 32, 40, 60 and 110W

Certifications and
Compliances:

ɀ NEC and CEC:

Class I, Division 1 Group C,D
Class I, Zone 1 Group IIB
Class II Groups E,F,G
Class III
Simultaneous Presence (Cl. and Cl. II)

ɀ UL Standards

844 Hazardous (Classified) Locations

1598 Luminaires
1598A Marine Locations
ɀ CSA Standards

C22.2 No. 137

Temperature Performance
Data:

2-Lamp

110W T4 90°C

(Based on 40°C Ambient)

32, 40W T5 75°C

60W T5 75°C

Class I
Class II
Zone 1

ɀ

Marine & Wet
Locations

ɀ

3,3R,4,4X: IP66

Supply
Wire

EVFDR

Furnished For Hub Line Volts 2-Lamp
Use With Size 60 Hz.* Cat. #

32 watt, T-8 medium
Bi-pin 265MA lamps

40 watt, T-12 medium 3/4⍯ 110-125 EVFDR22082
Bi-pin rapid start 3/4 277 EVFDR22087
430MA lamps†

60 watt, T-12 recessed 3/4⍯ 110-125 EVFDR22062
contact, 800MA lamps 3/4⍯ 277 EVFDR22067

110 watt, T-12 recessed 3/4⍯ 110-125 EVFDR22072
contact, 1500MA lamps† 3/4⍯ 277 EVFDR22077

For 220 volt 50 hz, 240 volt 50 hz or 240 volt 60 hz operation change the last ‘‘2’’ in the 120 volt 60 hz catalog number to a ‘‘9’’

*

and add ‘‘/220 50’’, ‘‘/240 50’’ or ‘‘/240 60’’ respectively.
ie. For a 2 lamp, 40 watt rapid start fixture for 220 volt 50 hz operation order an EVFDR22089/220 50.
† 50 Hz. not available.

Standard Finishes:

ɀ All exterior metal components – gray
epoxy enamel
ɀ Reflectors – white epoxy powder coat

3

⁄4⍯ 120-277 EVFDR22029/UNV

3

⁄4⍯ 347 EVFDR22029/347

862

US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds