Crouse Hinds 5L Champ Induction Lighting Catalog Page
5L
Luminaires with Induction
Lighting System
VMVIG and DMVIG Series
Get uninterrupted light for up to 11 years,
without changing a lamp.
Cooper Crouse-Hinds®Champ Luminaire with Induction Light Source
delivers up to 100,000 hours of white light in a hazardous location,
corrosion-resistant watertight package. That’s 5 to 8 times the typical
life of conventional fluorescent or HID lamps. And, with no
maintenance required for up to 11 years, you’ll reduce your
maintenance and lamp replacement costs.
Compelling reasons to choose the new Champ Induction
luminaire as the light source for industrial and hazardous
locations include:
ɀ Crisp white light (80+ color rendering index) provides
increased safety by clearly illuminating signs, instrument
panels, equipment and more with vibrant natural colors.
ɀ Up to 100,000 hours of lamp life minimizes routine
maintenance costs. If you operate this luminaire for 24
hours, 7 days a week, you will not need to change the lamp
for up to 11 years!
ɀ Instant illumination — no waiting for lamp warm-up time.
Increases productivity and safety.
ɀ Delivers the best possible luminaire temperature rating —
T6 (85°C) when used with the Champ restricted breathing
option. Ideal for hazardous areas where a low ignition
temperature is required.
ɀ Starts in low temperatures — as low as -40°C.
Class I, Division 2, Groups A,B,C,D
Class I, Zone 2, Group IIC
Resricted Breathing Suffix S826 for CI.I, Div 2 & Zone 2
Enclosure Type 4X, IP66 ɀ Marine Locations
Wet Locations ɀ UL and cUL Listed
165W Champ Induction provides as much light as a 175W Metal
Halide but lasts 7 times longer!
ADDITIONAL FEATURES & BENEFITS:
The Champ Induction luminaire is suitable for Class I, Division 2 and
Zone 2 areas with the assurance of Cooper Crouse-Hinds quality and
reliability. They are ideal for use in hard-to-reach applications and
where process requirements demand continuous luminaire operation.
Features:
ɀ High lumens per watts (72 lpw for the 165W Champ) will save energy
ɀ Retains strong light output (retains more than 70% output)
throughout the life of the lamp
ɀ Will not add electrical noise to the circuits — Total Harmonic
Distortion is less than 10%
ɀ Excellent power factor of .96 increases useable watts to an excellent
level and reduces energy consumption
ɀ Internal electronics are enclosed to ensure that there is no
interference with external instrumentation
802
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
Luminaires with Induction
Lighting System
VMVIG and DMVIG Series
Class I, Division 2, Groups A,B,C,D
Class I, Zone 2, Group IIC
Resricted Breathing Suffix S826 for CI.I, Div 2 & Zone 2
Enclosure Type 4X, IP66 ɀ Marine Locations
Wet Locations ɀ UL and cUL Listed
5L
APPLICATIONS:
Champ Induction luminaires are ideal:
ɀ Where an extra long life lamp source (up to 100,000 hrs) is required.
ɀ In areas that require lamps to reach full illumination immediately.
ɀ Where cool temperature ratings on the luminaire globe are needed
to ensure safe operation in hazardous areas.
ɀ In hard-to-reach applications where relamping is costly.
ɀ Where luminaire maintenance is difficult due to continuous
process operation requirements that restrict or prohibit shut down
except in emergency situations.
ɀ To provide a cost-effective lighting system (low installed/life cost) by
minimizing or even eliminating routine luminaire maintenance.
ɀ In cold environment applications.
CERTIFICATIONS AND COMPLIANCES:
NEC & CEC:
ɀ Class I, Division 2 and Zone 2
ɀ Class I, Division 2 Groups A, B, C, D
Class I, Zone 2 Group IIC
ɀ Restricted Breathing Suffix S826 for Class I, Division 2 & Zone 2
ɀ Marine Locations, Wet Locations, Enclosure Type 3, 3R, 4, 4X; IP66
ɀ UL and cUL Listed
UL Standards: 844, 60079-15, 1598, 1598A
CSA Standards: C22.2 No.137, E79 Series
Compliances and aprovals for the lamp system
ɀ RFI < 30 MHz EN 55015
ɀ RFI > 30 MHz EN 55022
ɀ Harmonics EN 61000-3-2
ɀ Immunity EN 61547
ɀ Safety EN 61347-2-3 & UL935
EN 60928
ɀ Performance EN 60929
ɀ Vibration & bump tests IEC 68-2-6-Fc
IEC 68-2-29-Eb
ɀ Quality standards ISO 9001
ɀ Environmental standard ISO 14001
STANDARD MATERIALS:
ɀ Ballast housings and mountings — copper-free aluminum (less than
0.4 of 1%)
ɀ Exterior hardware — stainless steel
ɀ Reflectors (dome and angle) — Krydon fiberglass-reinforced
polyester material
ɀ Globes — heat and impact-resistant internally fluted glass
ɀ Guards — copper-free aluminum (55W), stainless steel (85W).
STANDARD FINISHES:
ɀ Copper-free aluminum — epoxy powder coat
ɀ Krydon
ɀ Stainless steel — natural
OPTIONS:
DESCRIPTION
Restricted Breathing Construction
®
material — high reflectance white
SUFFIX TO ADD
TO CATALOG NO.
Class I, Division 2 & Zone 2 suitability
Cooler operating temperatures (T-Codes) S826
ACCESSORIES:
MOUNTING MODULES CAT. NO.
3
⁄4 NPT Pendant APM2
1 NPT Pendant APM3
3
⁄4 NPT Flexible Pendant HPM2
3
⁄4 NPT Ceiling Mount CM2
1 NPT Ceiling Mount CM3
3
⁄4 NPT Wall Mount TWM2
1 NPT Wall Mount TWM3
3
⁄4 NPT Quad Mount QM25
1
⁄2 NPT Stanchion Mount — 25 Degree Angle JM5
1
1
⁄2 NPT Stanchion Mount — Straight PM5
1
WATTAGE
55W RD70 RA70
85W RD739 RA739
165W RD739 RA739
DOME REFLECTOR
CATALOG NO.
ANGLE REFLECTORS
CATALOG NO.
DIMENSIONS:
See Catalog 6000 Section 3L for dimensional information on VMV and
DMV Series
AMPERAGE:
Power consumption for specific voltages as follows:
55W LUMINAIRES
a. 120VAC x .460mA ⍧ 55.70 watts
b. 230VAC x .260mA ⍧ 59.80 watts
85W LUMINAIRES
c. 120VAC x .710mA ⍧ 85.20 watts
d. 230VAC x .400mA ⍧ 92.00 watts
165W LUMINAIRES
e. 230VAC x .700mA ⍧ 161.00 watts
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
803
Loading...