Crouse Hinds 5F Redapt DPE increased safety Catalog Page
breather/drains
Features:
• International Ex approvals
• IP66, CSA enclosure type (NEMA) 4X
• Available in two thread lengths: 10mm two drain holes or 15mm
three drain holes
• Available in brass, stainless steel and glass-filled nylon
• Metric and NPT threads available
Certifications and compliances:
Code of protection categories:
• ATEX: I M2/II 2 GD, Ex e I/II Mb Gb, Ex tb IIIC Db IP66; nylon:
II2GD, Ex e IIGb Ex tb IIIC Db IP66
• IECEx: Ex e I/IIC Mb/Gb, Ex tb IIIC Db IP66; nylon: Ex e IIC Gb, Ex
tb Db IP66
• EAC: ExeIU nylon, ExeIIU IP66
• CSA: Class I, Zone 1, Ex e II IP66, CSA enclosure type 4X (NEMA
4X)
Compliance standards:
• ATEX: EN 60079-0, EN 60079-7, EN 60079-31
• IECEx: IEC 60079-0, IEC 60079-7, IEC 60079-31
• CSA: CSA standard C22.2 No. 0-M, CSA standard C22.2 No. 0.5,
CSA standard C22.2 No. 94, CAN/CSA E79-7-95, UL2279
Certificate details:
• ATEX: ITS16 ATEX101338X
• IECEx: IECEx ITS 16.0014X
• EAC: TR RU C-GB.GB06.B.00106
• CSA: 185887-2500003408 (LR106084)
Cl. I, Zone 1, Ex e II
IECEx/ATEX
NEMA 4X
IP66
Dimensions (in inches):
5F
5FRedapt DPE increased safety (Exe)
Standard materials:
• Brass CZ121
• 316 stainless steel
• Aluminum
• Glass-filled nylon
Plating options:
• Electroless nickel
• Zinc
• Others on application
Temperature ratings:
• Metallic body dependent on filter and seal material
• Nylon body: -50°C to +125°C, unless limited by filter material
• HDPE filter: -50°C to 85°C
• Metallic filter dependent on body and interface material
• Nitrile: -30°C to +100°C (supplied as standard)
Minimum
Size A/F
M20 1.13 0.91 0.39
M25 1.37 0.91 0.39
M32 1.63 0.91 0.39
1
/2“ NPT 1.13 1.10 0.59
3
/4“ NPT 1.37 1.10 0.59
1” NPT 1.63 1.10 0.59
overall length
(A)
Minimum
thread length
(B)
5F
5F
Redapt DPE increased safety (Exe)
breather/drains
Cl. I, Zone 1, Ex e II
IECEx/ATEX
NEMA 4X
IP66
Ordering information:
Part number example
DPE3029S3
DP E 3 0 29 S3
Certification
E
Exe I and IIC
Material
1
3
4
Plating
0
1
2
Brass
Stainless steel
Glass-filled nylonA
Unplated
Electroless nickel
Zinc
Thread type
04
05
06
29
30
31
M20
M25
M32
½” NPT
¾” NPT
1” NPT
Thread length
S1
S2
S3
S4
Note: NPT threaded breather/drains are only
10mm, 2 holes, with castellated
locknut
10mm, 2 holes, without castellated
locknut
15mm, 3 holes, with castellated
locknut
15mm, 3 holes, without castellated
locknut
available in S3 and S4 options.
Loading...