Crouse Hinds 4L HID Fixtures Catalog Page
4L
EVM HazardȿGard
®
H.I.D. Luminaires
Mogul Base
Factory Sealed (Groups C.D)
ɀ
Cl. I, Div. 1 Groups B (GB suffix),C,D
ɀ
Cl. I, Zone 1 Groups IIB + H2
(with suffix – GB), IIB IIA
ɀ
Cl. II, Div. 1, Groups E,F,G; Class III,
Simultaneous Presence (175W max)
ɀ
Paint Spray
(100W max)
ɀ
Marine & Wet Locations
ɀ
3,3R,4,4X; IP66
Application:
HazardȿGard
ɀ heavy process industries where flammable
or explosive vapors, gases or combustible
dusts are present
ɀ hazardous areas, both indoors and
outdoors where long life and low
maintenance costs are desired
ɀ petroleum refineries, chemical,
petrochemical and other heavy process
industry facilities
ɀ paint spray facilities
ɀ hazardous locations requiring elevated
ambient capability
®
luminaires are used in:
Features:
ɀ Luminaire is factory wired; power is fed
through ‘‘wireless’’ connection block which
serves as a mechanical seal between conduit
and ballast compartments, eliminating the
need for an external, field installed seal. The
result is fast, easy installation.
ɀ Dome and 30° angle reflectors made of
®
Krydon
chip or peel (order separately – page 796).
ɀ High bay reflectors of Alzak
high wattage applications
ɀ Internally fluted glass globes reduce glare
and provide comfortable viewing light.
ɀ Wide range of light sources and wattages
to meet specific lighting needs – 50 – 400W
high pressure sodium (HPS); 100 – 400W
mercury vapor (MV); 70 – 400W metal halide
(MH).
ɀ High power factor (90%+) ballasts reduce
power costs – allow more luminaires per
circuit.
ɀ Four mounting arrangements to suit any
lighting layout – pendant, ceiling, wall bracket
and stanchion.
ɀ Paint spray booth suitability on 50 to 100
watt luminaires provides efficient, economical
H.I.D. lighting for areas where paint residue
may accumulate on luminaires.
ɀ Elevated ambient capability permits reliable
operation at high ambient temperature.
Selected luminaires are suitable for ambient
temperature up to 75°C.
ɀ Integral ballasts – separate ballasts are not
required. Lowest installed cost.
ɀ Factory sealed, porcelain, mogul base
socket.
material – won’t rust, corrode, dent,
®
aluminum for
Standard Materials:
ɀ Mounting modules, cover, ballast housing,
guard, globe ring – copper-free aluminum
ɀ Globe – heat and impact resistant glass
ɀ Exterior hardware – stainless steel
ɀ Lamp socket – porcelain with stainless steel
screw shell
ɀ Reflectors – dome and angle:
fiberglass-reinforced polyester material; high
bay: Alzak aluminum
Alzak is a registered trademark of ALCOA.
* IR and BG options cannot be used together.
** Can be used with BG option.
刁 CSA Certified luminaires are not available with multi-tap
ballast or S658 fuse option.
† When ordering fuses for luminaires, option S658, you must
specify the operating voltage. S658 cannot be ordered with
/MT in the catalog number.
Krydon
Standard Finishes:
ɀ Copper-free aluminum – epoxy powder
coat
Krydon
ɀ
ɀ Alzak – natural (anodized)
– high reflectance white
Options:
ɀ Fused – to protect ballast and capacitor
against abnormal line conditions. Add suffix
S658 to Cat. No.# †
ɀ Instant restrike – enables a hot HPS lamp to
immediately restrike after a momentary loss
of arc due to voltage fluctuation or power
outage. It has no effect on the warm-up
period of a cold lamp
(50-150W LX HPS only). Add suffix IR to Cat.
No.*
ɀ Quartz auxiliary lighting – quartz lamp
comes to full brightness instantly upon
restoration of power to provide emergency
illumination during the normal restrike period
of the H.I.D. lamp (for use with ED28 lamp).
Add suffix QTZ to Cat. No.** (Note: Quartz
lamp not included; use 100 W single-ended
lamp – Q100DC, Q100CL/DC, or
100Q/CL/DC.)
ɀ BallastȿGard – to eliminate the normally
continuous high voltage pulsing in the event
of a cycling lamp, inoperative lamp, or no
lamp in the socket extending the life of the
ballast.(For use with 50-400W HPS lamps.)
Add suffix BG to Cat. No.*
ɀ Group B suitability – luminaires suitable for
use in Class I, Group B hazardous (classified)
locations. Add suffix GB to Cat. No.
ɀ HazardȿGard
for floodlighting applications. For use on
pendant mount luminaires only. Add suffix
S812 to Cat. No. – See Floodlight Section
®
supplied with trunnion arm
Size Ranges:
ɀ3⁄4⍯, 1⍯ and 11⁄4⍯ hubs (see ordering
information – pages 793 to 795)
Electrical Rating Ranges:
ɀ 120, 208, 240, 277, 347, 480, 600, multitap#.
ɀ 50 to 400 watts
Certifications and
Compliances:
ɀ NEC and CEC:
Class I, Division 1, Groups B (with suffix
GB), C,D
Class I, Zone 1, Groups IIB + H2 (with suffix
GB), IIB, IIA
100W max – Paint Spray Suitability
175W max – Class II, Class III, +
Simultaneous Presence
ɀ UL Standards:
844 Hazardous (Classified) Locations
1598 Luminaires
1598A Marine Locations
ɀ CSA Standards:
C22.2 No. 137
792
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
50-400W EVM
HazardȿGard
®
H.I.D.
Luminaires
Mogul Base
ɀ
Cl. I, Div. 1, Groups B(GB suffix),C,D
ɀ
Cl. I, Zone 1 Groups IIB + H2
(with suffix GB), IIB, IIA
ɀ
Cl. II, Div. 1, Groups E,F,G; Class III,
Simultaneous Presence (175W max)
ɀ
Paint Spray
(100W max)
ɀ
Marine & Wet
Locations
ɀ
3,3R,4,4X; IP66
Factory Sealed (Groups C,D)
Pendant Luminaires Wall Bracket Luminaires Ceiling Luminaires Stanchion Luminaires (25°)
Without With Without With Without With Without With
Hub Guard Guard Guard Guard Guard Guard Guard Guard
Watts Size Cat. # Cat. # Cat. # Cat. # Cat. # Cat. # Cat. # Cat. #
High Pressure Sodium
50
70
100
200
250
400
3
⁄4 EVMA42050 EVMA42051 EVMBX42050 EVMBX42051 EVMCX42050 EVMCX42051
1 EVMA43050 EVMA43051 EVMBX43050 EVMBX43051 EVMCX43050 EVMCX43051
1
⁄4 EVMJ44050 EVMJ44051
1
3
⁄4 EVMA42070 EVMA42071 EVMBX42070 EVMBX42071 EVMCX42070 EVMCX42071
1 EVMA43070 EVMA43071 EVMBX43070 EVMBX43071 EVMCX43070 EVMCX43071
1
⁄4 EVMJ44070 EVMJ44071
1
3
⁄4 EVMA42100 EVMA42101 EVMBX42100 EVMBX42101 EVMCX42100 EVMCX42101
1 EVMA43100 EVMA43101 EVMBX43100 EVMBX43101 EVMCX43100 EVMCX43101
1
⁄4 EVMJ44100 EVMJ44101
1
3
⁄4 EVMA42150 EVMA42151 EVMBX42150 EVMBX42151 EVMCX42150 EVMCX42151150
1 EVMA43150 EVMA43151 EVMBX43150 EVMBX43151 EVMCX43150 EVMCX43151
1
⁄4 EVMJ44150 EVMJ44151
1
3
⁄4 EVMA42200 EVMA42201 EVMBX42200 EVMBX42201 EVMCX42200 EVMCX42201
1 EVMA43200 EVMA43201 EVMBX43200 EVMBX43201 EVMCX43200 EVMCX43201
1
⁄4 EVMJ44200 EVMJ44201
1
3
⁄4 EVMA42250 EVMA42251 EVMBX42250 EVMBX42251 EVMCX42250 EVMCX42251
1 EVMA43250 EVMA43251 EVMBX43250 EVMBX43251 EVMCX43250 EVMCX43251
1
⁄4 EVMJ44250 EVMJ44251
1
3
⁄4 EVMA42400 EVMA42401 EVMBX42400 EVMBX42401 EVMCX42400 EVMCX42401
1 EVMA43400 EVMA43401 EVMBX43400 EVMBX43401 EVMCX43400 EVMCX43401
1
⁄4 EVMJ44400 EVMJ44401
1
4L
Complete the Catalog Number by Adding Voltage and Options Suffixes as Follows:
1. Standard Voltage Ballasts – 60HZ
Voltage Multi-tap 120V 480V Tri-tap 120V
Suffix /MT /120 /480 /TT /120
CEC/CSA (cUL)– CWI Isolated Ballasts Export
Voltage 208V CWI 240V CWI 480V CWI 600V CWI 220V 60HZ 220V 50HZ 230V 50HZ 240V 50HZ
Suffix /208CWI /240CWI /480CWI /600CWI /220 /220 50 /230 50 /240 50
2. 150W HPS Luminaires, 55V Lamps is Standard, for 100V lamps - Add suffix ‘‘CE’’
3. Options - Add the Required Options Suffixes from page 792, in Alpha-numeric Order
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
NEC/UL CEC/CSA (cUL)
Optional Voltage Ballasts – 50 or 60HZ
793
Loading...