Crouse Hinds 4F Conduit Outlet Boxes & Bodies Catalog Page
4F
Condulet®Conduit Outlet
Bodies, Elbows and Tees
Cl. I, Div. 1 & 2, Groups A,B,C,D*
Cl. II, Div. 1, Groups E,F,G
Cl. II, Div. 2, Groups F,G
Cl. III
NEMA 7ABCD,9EFG
Explosionproof
Dust-Ignitionproof
Application:
LBH conduit outlet bodies are
installed in hazardous areas to:
ɀ act as pull outlets especially for
conductors that are stiff due to
large size or type of insulation
ɀ make 90° bends in conduit
system, allowing straight pull in
either direction
ɀ provide for conduit service
entrance to buildings
ɀ provide for conductor entrance
to motors
ɀ provide access to wiring for
maintenance and future system
changes
LBY elbows are installed in
conduit systems within hazardous
areas to:
ɀ make 90° bends in conduit
systems where space is limited
ɀ act as pull outlets
ɀ provide access to conductors
for maintenance and future
system changes
ET series short radius tees are
installed in conduit systems within
hazardous areas to:
ɀ allow single conduit stub up to
outlet and device boxes located
above or below main conduit
runs. Eliminates separate feed
and return conduits
Features:
LBH bodies have:
ɀ cover openings on an angle,
permitting conductors to be
pulled straight through hubs from
either direction
ɀ domed covers to permit easy
conductor bends (relieves strain
on insulation)
ɀ taper threaded hubs with
integral bushings
LBY elbows have:
ɀ maximum volume for bends
within a compact overall size
ɀ screw on cover for ease of
installation and removal
ɀ cover opening on an angle,
permitting conductors to be
pulled straight through either hub
ɀ taper threaded hubs and
integral bushing for rigid threaded
conduit
ET short radius tees have:
ɀ compact size and small radius
of bend for use in concealed, or
open conduit systems.
Particularly suited for use in
shallow floors or partitions
ɀ taper threaded hubs and
integral bushing for rigid threaded
conduit
Largest hub is shown at top of photo.
‡
Standard Materials:
ɀ LBH, LBY and ET –
alloy
Feraloy
®
iron
Standard Finishes:
ɀ LBH, LBY and ET –
electrogalvanized and aluminum
acrylic paint
Options:
Suffix to be
Description Cat. #
LBH and LBY series – copper-free
aluminum ..................SA
LBH and LBY series –
TM
epoxy powder coat
free
................ add suffix S752
Added to
Corro-
Size Ranges:
ɀ LBH bodies – hub size 1⁄2⍯ to 4⍯
ɀ LBY elbows – hub size
1
⁄2⍯ to 11⁄2
Certifications and
Compliances:
ɀ NEC:
LBH 10-20 –
Class I, Division 1 & 2, Groups
B,C,D
Class II, Division 1, Groups E,F,G
Class II, Division 2, Groups F,G
Class III
LBH 30-100
Class I, Division 1 & 2, Group D
Class II, Division 1, Groups E,F,G
Class II, Division 2, Groups F,G
Class III
LBY –
Class I, Division 1 & 2, Groups
C,D
Class II, Division 1, Groups E,F,G
Class II, Division 2, Groups F,G
Class III
ET –
Class I, Division 1 & 2, Groups
A,B,C,D
Class II, Division 1, Groups E,F,G
Class II, Division 2, Groups F,G
Class III
ɀ UL Standard: 886
ɀ CSA Standard: C22.2 No. 30
* See Compliances for
classification of each product.
LBH
Size Cat. #
1
⁄2 LBH10
3
⁄4 LBH20
1 LBH30
1
⁄4 LBH40
1
1
⁄2 LBH50
1
2 LBH60
1
⁄2 LBH70
2
3 LBH80
1
⁄2 LBH90
3
4 LBH100
LBY
Size Cat. #
1
⁄2 LBY15
3
⁄4 LBY25
1 LBY35
1
⁄4 LBY45
1
1
⁄2 LBY55
1
ET
Size Cat. #
3
⁄4–1⁄2–1⁄2 ‡ ET218
3
⁄4–3⁄4–3⁄4 ‡ ET228
3
⁄4–3⁄4 ‡ ET328Dimensions
1–
LBH LBY
ET
LBH
Size a b c d e f
1
⁄2 – 3⁄4 51⁄16 219⁄32 41
1 – 1⁄4 77⁄8 313⁄32 51⁄4 13⁄4 74
1
⁄2 1015⁄16 41⁄2 73⁄32 21⁄2 10 5
1
2 10
1
⁄2 – 3 155⁄8 51⁄2 91⁄2 315
2
31⁄2 – 4 239⁄16 611⁄16 113⁄4 4247
21
⁄32 425⁄32 73⁄32 21⁄2 10 5
LBY ET
Size a b Size a b c d
1
⁄2 29⁄16 2
3
⁄4 213⁄16 21⁄4
1 33⁄32 21⁄2 1–3⁄4–3⁄4 43 11⁄2 13⁄4
11⁄4 33⁄4 215⁄16
11⁄2 41⁄4 33⁄8
3
⁄4–1⁄2–1⁄2 425⁄8 11⁄4 11⁄2
3
⁄4–3⁄4–3⁄4 43 11⁄2 11⁄2
3
⁄16 42
3
⁄4 55⁄8
3
⁄4
1
⁄8
58
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
Loading...