Crouse Hinds 2L Incandescent Fixtures Catalog Page
2L
Incandescent Luminaires
Hazardous
Application and Selection
Application:
ɀ For use in areas made hazardous by
presence of flammable vapors, gases, or
dusts
ɀ For indoor or outdoor use. For general area
or spot lighting
Considerations for
Selection:
Environmental:
ɀ What is the hazardous area classification
(NEC)/(CEC) of the location in which the
luminaires will be installed?
Lighting levels required:
ɀ What wattage fixture(s) will provide the
desired light level? (See Lighting Selector
Guide, pages 665 through 689, to determine
number and location of luminaires required.)
Physical arrangement:
ɀ Type of luminaire mounting needed
Product Selection:
Two product families are included in Section
2L as follows:
ɀ EVI models suitable for use in Class I,
Groups C, D, and Class II, Groups E, F and G
locations. These luminaires may be ordered
with a wide variety of reflector styles and
mounting arrangements to provide the
required light distribution, depending on
application, mounting height and lamp size.
Check individual catalog pages for specific
hazardous location suitabilities of each
luminaire. Models are available for lamp sizes
100 watt, A-19 to 500 watt, PS-40.
ɀ EV Models suitable for use in Class 1,
Groups A, B, C, D locations. These luminaires
may be ordered with a wide variety of
reflector styles and arrangements to provide
the required light distribution, depending on
application, mounting height and lamp size.
Check individual catalog pages for specific
hazardous location suitabilities of each
luminaire. Models are available for lamp size
300 watt PS35 mogul base.
Table 500-3(d)
Identification Numbers.
Maximum Identification
Temperature Number
Deg. C Deg. F
450 842 T1
300 572 T2
280 536 T2A
260 500 T2B
230 446 T2C
215 419 T2D
200 392 T3
180 356 T3A
165 329 T3B
160 320 T3C
135 275 T4
120 248 T4A
100 212 T5
85 185 T6
710
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
EVI Series Explosionproof
Incandescent Luminaires
Factory Sealed
100-500W Medium and Mogul Base
Cl. I, Div. 1, Groups C,D
Cl. I, Zone 1 & 2, Group IIB
Cl. II, Groups E,F,G (Max 150W-Med. base)
Cl. III & Simultaneous Presence (Max 150W-Med. base)
Marine and Wet Locations ɀ Type 4X; IP66
2L
Application:
EVI series incandescent luminaires are used:
ɀ for Type 4X, marine, wet location and hose
down environments.
ɀ where a consistent light level relatively
unaffected by extremes in ambient temperature
(-40°C to +65°C) is required.
ɀ in areas that require lamps to reach full
illumination immediately.
ɀ in areas that require lamps to be frequently
turned on and off.
ɀ indoor & outdoor in locations which are
hazardous due to the presence of flammable
vapors or gases, ignitible dusts or ignitible fibers
& flyings.
ɀ where a luminaire is required for tough
environmental conditions involving corrosives,
water, dust and extreme temperatures.
ɀ manufacturing plants, heavy industrial facilities,
industrial process facilities such as refineries,
chemical, petrochemical, pharmaceutical and
platforms.
ɀ for lighting of loading docks, tunnels,
stairways, storage closets & task lighting.
Features:
ɀ Ambient suitability to 65°C.
ɀ Standard 90°C rated building wire for 150W
max 40°C ambient application - represents
more than 75% of all applications.
ɀ Type 4X, marine outdoor locations.
ɀ Factory sealed - no external seals required.
ɀ Quick connect - fixture threads onto the
mounting module for easy installation.
ɀ One size luminaire for all medium base
incandescent lamps through 300W.
ɀ One size luminaire for all mogul base
incandescent lamps through 500W.
ɀ Small compact size - ceiling mount is 13
long.
ɀ Shock absorbing receptacle.
ɀ Easy to assemble & relamp.
ɀ Silicone gaskets seal out dirt and moisture.
ɀ Epoxy powder coat for corrosion resistance.
ɀ Same mounting modules as used with the
EVM & EVLP series.
3
⁄4⍯
Standard Materials:
ɀ Body, mounting modules and guard - copperfree
aluminum
ɀ Globe - heat & impact resistant glass
ɀ Gaskets - silicone
ɀ External hardware - stainless steel
ɀ Reflectors - Krydon
polyester
®
fiberglass-reinforced
Standard Finishes:
ɀ Copper free aluminum - Corro-freeTMepoxy
powder coat
ɀ Stainless steel - Natural
ɀ Krydon
®
Reflectors - High reflectance white
Electrical Ratings:
Sources/Wattages
ɀ Medium Base - Maximum 300W (PS25)
ɀ Mogul Base - Maximum 500W (PS40)
Voltages
ɀ Medium Base 120V (250V with suffix /250)
ɀ Mogul Base 277V
Hub Size
3
⁄4⍯ or 1⍯ NPT pendant, ceiling, wall mount
ɀ
3
⁄4⍯ NPT bulkhead mount
ɀ
Certifications and Compliances:
NEC & CEC:
ɀ Class I, Division 1, Groups C & D
ɀ Class I, Zone 1, Group IIB
ɀ Class II, Groups E, F & G
ɀ Marine Locations, Wet Locations, Enclosure
Type 4X, IP66
ɀ UL Listed
ɀ cUL Listed (Certified by UL to CSA Standards)
NEC:
ɀ Class III; Simultaneous Presence
UL Standards:
ɀ 844 Electric Fixture Hangers for Hazardous
Locations
ɀ 1598 Luminaires
ɀ 1598A Luminaires for Installation on Marine
Vessels
CSA Standards:
ɀ C22.2 No. 137
Options:
Description Suffix to be
ɀ 250V luminaire for /250
export applications
(medium base only)
added to Cat. No.
Accessories:
ɀ Reflectors - See Ordering by Components on
page 713.
US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright©2006 Cooper Crouse-Hinds
711
Loading...