Crouse Hinds 2F Single Gang Device Boxes Catalog Page
Condulet®Single Gang Device Boxes Cast Iron or Aluminum
With and Without Mounting Lugs for
Threaded Rigid and IMC Conduit
Accessories
see pages 37–45
2F
Applications:
Cast device boxes are installed to:
• Accommodate wiring devices
• Act as pull boxes for conductors in a
conduit system
• Provide openings to make splices and
taps in conductors
• Provide access to conductors for
maintenance and future system changes
• Connect conduit sections
• FSY boxes for mounting surface devices
on floor or bench (used with single gang
covers)
Features:
• Internal green ground screw standard on
boxes
• Suitable for use in wet locations when
used with gasketed covers
• Mounting lugs standard on most boxes
• Tapered threaded hubs (NPT) with
integral bushing
• Available for surface mounting (with
mounting lugs) or flush mounting
(without mounting lugs) as listed
• Available as shallow (FS) or deep (FD)
configuration. Use FD if device to be
enclosed exceeds 1
• Ample wiring room provided in either FS
or FD configuration
• Wide selection of surface or flush covers
available in three materials (sheet steel,
®
Feraloy
, aluminum)
• Covers for flush mounting extend to
conceal the rough plaster line
• Available in single gang and multi-gang
configurations with hubs, and as blank
bodies for drilled and tapped openings
5
/8" in depth
Options:
Description Suffix
Finishes:
Corro-free™ epoxy powder coat
- external body
Corro-free™ epoxy powder coat
- internal and external
Hot dipped galvanized
S752
S753
HDG
Size Ranges:
• Hubs – 1/2" to 1"
FS & FD
Size Cat. # Cat. #
1
/2 FS1* FD1†
3
/4 FS2* FD2†
1 FS3† FD3†
Size Cat. # Cat. #
1
/2 FSR1 FDR1
3
/4 FSR2 FDR2*†
Die Cast Aluminum‡
Size Cat. # Cat. #
1
/2 FS1 SA FSC1 SA
3
/4 FS2 SA FSC2 SA
‡Mounting lugs and ground screw are not offered with
standard die cast aluminum box. For sand cast
aluminum box with mounting lugs and ground screw,
change "SA" in catalog number to "SCA"
(Example: FS1 SCA).
2F
Certifications and
Compliances:
• UL Standard: 514
• ANSI Standard: C33.84
• Fed. Spec.: W-C-5860
• CSA Standard: C22.2 No. 18
Standard Materials:
• Feraloy iron alloy or copper-free
aluminum.
Standard Finishes:
• Feraloy – electrogalvanized and
aluminum acrylic paint
• Aluminum – natural
Size Cat. # Cat. #
1
/2 FSC1* FDC1†
3
/4 FSC2* FDC2†
1 FSC3† FDC3†
Size Cat. # Cat. #
1
/2 FSL1 FDL1
3
/4 FSL2 FDL2*†
*Available in sand cast copper-free aluminum – add
suffix SCA to Cat. No.
†Available in sand cast copper-free aluminum – add
suffix SA to Cat. No.
Condulet
®
Multi-Gang Device Boxes -
Cast Iron or Aluminum
With and Without Mounting Lugs for
Threaded Rigid and IMC Conduit
Accessories
see pages 37–45
2F
FS†
Two Gang Tandem
Size Cat. #
1
/2 FS17
3
/4 FS27
FS & FD
FSC†
Two Gang Tandem
Size Cat. #
1
/2 FSC17
3
/4 FSC27
Dimensions
In Inches:
FSE
Two Gang
Size Cat. #
3
/4 FSE22
2F
Two Gang
Size Cat. # Cat. #
1
/2 FS12* FD12
3
/4 FS22* FD22*
1 FS32 FD32
FSC & FDC
Two Gang
Size Cat. # Cat. #
1
/2 FSC12 FDC12
3
/4 FSC222 FDC222*
1 FSC32 FDC32
†Use single gang covers only.
*Available in copper-free aluminum;
add suffix "SA".
Two gang tandem Two gang
Two gang tandem
Series
FS
Hub
Size a b e
1
/2
3
/4
7
/8
7
/8
5
/8 11/4
3
/4 11/2
Two gang
Series Hub Size a b c d h
FS
FD
1
/2
3
/4
112
1
/2
3
/
4
112
7
/8 21/4 17/8 111/16
7
/8 21/4 17/8 111/16
7
/8 21/4 211/16 21/2
7
/
8
1
/2 17/8 111/16
21/
4
1
/2 211/16 21/2
211/
16
21/
2
5
/8
3
/4
7
/8
5
/8
3
/
4
7
/8
Loading...