Cross 8441 User Manual
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 19.04.2013
Revision: 19.04.2013
Page 1/5
Version number 1
*
1 Identification of the substance/mixture and of the company/undertaking
·
Product identifier
·
Trade name: FMI 601 blue
·
Registration number
The ingredients of this ink have been pre-registered according to 1907/2006/EC (REACH)
·
Relevant identified uses of the substance or mixture and uses advised against
Currently no such applications are identified
·
Application of the substance / the preparation
·
Details of the supplier of the safety data sheet
·
Manufacturer/Supplier:
Fineliner Ink
SHANGHAI DOKUMENTAL INK Co. Ltd.
No. 38 Lane 451 Mao Jia Road
Luodian Town, Baoshan District
Shanghai 201908 , P.R. China
Tel.: 86-21-66864551 / 66864542
·
Further information obtainable from:
Ms. Cindy Song
Email: cindy.song@dokumental.cn
·
Emergency telephone number:
Mr. Bruce Gindelberger
Tel.: mobile +86-13917914495
Email:bruce.gindelberger@dokumental.cn
2 Hazards identification
·
Classification of the substance or mixture
·
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
·
Information concerning particular hazards for human and environment:
The product does not have to be labelled due to the calculation procedure of the "General
Classification guideline for preparations of the EU" in the latest valid version.
·
Classification system:
The classification is according to the latest editions of the EU-lists, and extended by company and
literature data.
·
Label elements
·
Labelling according to EU guidelines:
Observe the general safety regulations when handling chemicals.
The product is not subject to identification regulations under EU Directives and the Ordinance on
Hazardous Materials (German GefStoffV).
·
Other hazards
·
Results of PBT and vPvB assessment
·
PBT:
·
Not applicable.
vPvB:
Not applicable.
Not applicable.
3 Composition/information on ingredients
·
Chemical characterization: Mixtures
Mixture of the following substances, containing non-hazardous substances and colouring agents.
·
Description:
·
Dangerous components:
CAS: 111-46-6
EINECS: 203-872-2
Mixture of substances listed below with nonhazardous additions.
2,2'-oxybisethanol Xn R22
Acute Tox. 4, H302
CAS: 4129-84-4 C. I. Acid Violet 17 N R51/53
Aquatic Chronic 2, H411
·
Additional information:
For the wording of the listed risk phrases refer to section 16.
4 First aid measures
·
Description of first aid measures
·
General information:
·
After inhalation:
·
After skin contact:
·
After eye contact:
·
After swallowing:
·
Information for doctor:
·
Most important symptoms and effects, both acute and delayed
No further relevant information available.
·
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
No special measures required.
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
(Contd. on page 2)
10-25%
2,5%
≤
EU
36.0.1
Safety data sheet
according to 1907/2006/EC, Article 31
Trade name: FMI 601 blue
5 Firefighting measures
·
Extinguishing media
·
Suitable extinguishing agents:
·
Special hazards arising from the substance or mixture
·
Advice for firefighters
·
Protective equipment:
No special measures required.
6 Accidental release measures
·
Personal precautions, protective equipment and emergency procedures
·
Environmental precautions:
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
·
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
·
Reference to other sections
No dangerous substances are released.
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Wear protective clothing.
Printing date 19.04.2013
Revision: 19.04.2013
(Contd. of page 1)
Page 2/5
Version number 1
7 Handling and storage
·
Handling:
·
Precautions for safe handling
No special measures required.
Ensure good ventilation/exhaustion at the workplace.
·
Information about fire - and explosion protection:
·
Conditions for safe storage, including any incompatibilities
·
Storage:
·
Requirements to be met by storerooms and receptacles:
·
Information about storage in one common storage facility:
·
Further information about storage conditions:
·
Specific end use(s)
No further relevant information available.
No special measures required.
No special requirements.
Not required.
None.
8 Exposure controls/personal protection
·
Additional information about design of technical facilities:
·
Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to
be monitored at the workplace.
·
Additional information:
·
Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
The lists valid during the making were used as basis.
The usual precautionary measures are to be adhered to when handling chemicals.
·
Respiratory protection:
·
Protection of hands:
Not required.
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and
the degradation
·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks
of quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore
to be checked prior to the application.
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has
to be observed.
·
Eye protection:
Goggles recommended during refilling
No further data; see item 7.
(Contd. on page 3)
EU
36.0.1
Loading...