Crosley Radio CR82 User Manual

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CR82

Harco Radio

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within an equilateral
triangle, is intended to alert user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be
of sufficient magnitude to constitute risk of electric shock to
persons.

The exclamation point within an equilateral triangle is intended
to alert user to the presence of important operating and
maintenance (servicing) instruction in the literature accompanying
the appliance.

SPECIFICATION

CAUTION:

FREQUENCY RANGE : FM 87.5 - 108 MHz
POWER SOURCE : DC 6V, 1.5 X 4 ‘AA’ UM3 BATTERY

ANTENNAS : BUILT-IN FERRITE BAR FOR AM

•DESIGN AND SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE.

: AM 525 - 1710 KHz

: EXTERNAL ANTENNA FOR FM

910-206400-004

Instruction Manual

IMPORTANT SAFETY INSTRUCTION

PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instructions should be read
before the product is operated.

2. Retain instructions - The safety and operating instructions should be retained
for future reference.

3. Heed Warnings - All warnings on the product and in the operating Instructions
should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this product near water - for example, near a
bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near
a swimming pool; and the like.

8. A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the product
and to protect it from overheating, and these openings must
not be blocked or covered, The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built - in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.

10. Power Sources - This product should be operated only from the type of power
source indicated on the marking label, if you are not sure of the type of power
supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the
operating instructions.

11. Grounding or Polarization - This product may be equipped with a polarized
alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try
reversing the plug, If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.

12. Power - Cord Protection - Power - supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point wherethey exit from the product.

13. Lightning - For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power - line surges.

14. Power Lines - An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an outside antenna system,

THAT ARE APPLICABLE TO YOUR EQUIPMENT

AC

Polarized Plug

extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.

15. Overloading - Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry - Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short - out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the
product.

17. Servicing - Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.

18. Damage Requiring Service - Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions;
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as
an improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to its

normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance - this indicates

a need for service.

19. Replacement Parts - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.

20. Safety Check - Upon completion of any service or repairs to this product, ask
the service technician to perform safety checks to determine that the product
is in proper operating condition.

21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.

22. Heat - The product should be situated away from heat sources such as radiators.
Heat registers, stoves, or other products (including amplifiers) that produce
heat.

WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
intereference to radio or television reception, which can be determined by turning
the equipment off and on , the user is encouraged to try to correct the interference
by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio TV technician for help.

POWER SOURCE

Open the BATTERY DOOR (7) insert 4 batteries (AA or UM-3) observing
correct polarity(+,-).

RADIO OPERATION

1. Turn the unit ON by turning the ON-OFF SWITCH/VOLUME
CONTROL (4) clockwise to the ON position.

2. Select the desired waveband by turning the BAND selector (5) to
either the AM or FM position.

3. Turn the TUNING KNOB (3) to select the desired station on the Tuner
Dial (2).

4. Adjust the volume to the desired listening level by turning the ON-OFF
SWITCH/VOLUME CONTROL (4).

5. Turn the unit off by turning the ON-OFF SWITCH/VOLUME CONTROL
(4) counterclockwise to the off position.

EXTERNAL ANTENNA

The unit is provided with a wire antenna for FM reception. Move the wire until
the reception is clear . Do not connect the FM antenna to any external antenna.
Am reception would be improved by relocating the unit.

TROUBLESHOOTING GUIDE

The unit is not functioning
* Make sure the batteries are inserted correctly. Replace batteries if

necessary.

* The unit is not turned on, rotate the ON- OFF SWITCH / VOLUME

CONTROL clockwise past the “click” to make sure the unit is on.
No radio
* Make sure the volume is turned up
* Rotate the tuning knob to find a station

LOCATION OF PARTS

1. SPEAKER

2. TUNER DIAL

3. TUNING KNOB

4. ON-OFF SWITCH / VOLUME CONTROL

5. AM/FM BAND SWITCH

6. EXTERNAL FM ANTENNA

7. BATTERY DOOR (REAR)

4

5

Front View

1

2

TUNING

3

Back View

WARRANTY

Crosley Radio Products are warranted against defects in material and
workmanship for a period of 90 days beginning from the date of sale to the
original purchaser.

Should the unit fail under normal usage during the 90 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the original
customer before returning the unit. Call Crosley Radio customer service for
Return Authorization at [phone] from 9 AM to 5 PM (EST) Monday to
Friday.

Upon receiving the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its original packaging. Include
any adapters, parts, & accessories which were originally provided with the
product, along with a check or money order for $19.95 made out to Crosley
Radio to cover the handling and return postage. Display the R.A. # on the
outside of the carton and ship PREPAID via standard UPS or its equivalent.

7

6

ATTN: RETURNS DEP'T

2001 PRODUCTION DRIVE

BAY 2 & 3

LOUISVILLE, KY 40299

CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.

The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.

The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of the product. This warranty does not cover damage due to improper
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.

This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state
to state.

In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.