Crosley VAW3584GW0, CAW42114GW0, CAW35114GW0 Owner’s Manual

TOP-LOADING HIGH

EFFICIENCY WASHER

USE AND CARE GUIDE

Para una versión de estas instrucciones en español, visite www.whirlpool.com

LAVEUSE À FAIBLE

CONSOMMATION D’EAU AVEC

CHARGEMENT PAR LE DESSUS

GUIDE D’UTILISATION

ET D’ENTRETIEN

Table of Contents

WASHER SAFETY ...................................................................... 2

WHAT’S NEW UNDER THE LID? .............................................. 3

CONTROL PANEL AND FEATURES ......................................... 4

CYCLE GUIDE ........................................................................... 6

USING YOUR WASHER ............................................................ 8

WASHER MAINTENANCE ...................................................... 12

TROUBLESHOOTING ............................................................. 14

WARRANTY ............................................................................. 19

ASSISTANCE OR SERVICE .................................BACK COVER

Table des matières

SÉCURITÉ DE LA LAVEUSE ................................................... 20

QUOI DE NEUF SOUS LE COUVERCLE? .............................. 21

TABLEAU DE COMMANDE ET

CARACTÉRISTIQUES ............................................................. 22

GUIDE DE PROGRAMMES ..................................................... 24

UTILISATION DE LA LAVEUSE .............................................. 26

ENTRETIEN DE LA LAVEUSE ................................................. 30

DÉPANNAGE ........................................................................... 32

GARANTIE ............................................................................... 39

ASSISTANCE OU SERVICE .............. COUVERTURE ARRIÈRE

W11042526A W11042527A-SP

Designed to use only HE High Efciency detergents. Conçue pour l’utilisation d’un détergent haute efcacité seulement.

WASHER SAFETY

WHAT’S NEW UNDER THE LID?

Your new washer will operate differently than your past agitator-style washer.

Lid Lock

To allow for higher spin speeds, the lid will lock and the Lid Locked light will turn on. When this light is lit, the lid is locked and cannot be opened. When this light is blinking, the washer is paused. When this light is off, the lid can be opened. After a cycle is started, the washer will ll to the appropriate water level. When the washer is done lling, it will start to agitate. If you need to open the lid to add a garment after this point, the lid will remain unlocked during the entire agitation portion of the wash phase. The cycle will automatically pause when the lid is opened, and the cycle will resume once the lid is closed. The lid will lock before the spin phase begins. If you need to pause or stop after this point, you must press the Start/Pause button and wait for the lid to unlock. The lid will only unlock after washer movement has stopped. Depending on when in the cycle you try to pause, it may take several seconds to several minutes for the lid to unlock. Press the Start/Pause

button to resume the cycle.

Water Level Options

Set the Water Level knob to the Auto Sensing setting and the washer automatically adjusts the water level to the load size. Set the Water Level knob to the Deep Water Wash setting and the washer will ll to the maximum water level.

Sensing

This washer will perform a series of spins to check for load balance. During this time, a series of clicks and a whirring noise signal that sensing technology is determining if there is an off-balance load.

Sounds

At different stages of the wash cycle, you may hear sounds and pauses that are different from those of your previous washer. For example, you may hear a clicking and hum at the beginning of the spin phase as the lid lock goes through a self-test. There will be different kinds of humming and whirring sounds as the agitator tests for load balance or moves the load. And, sometimes, you may hear nothing at all as the washer determines the correct water level for your load or allows time for clothes to soak.

Choosing the Right Detergent

Use only High Efciency detergents. The package will be marked “HE” or “High Efciency.” Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component malfunction and, over time, buildup of mold or mildew. HE detergents should be low-sudsing and quick-dispersing to produce the right amount of suds for the best performance. They should hold soil in suspension so it is not redeposited onto clean clothes. Not all detergents labeled as High Efciency are identical in formulation and their ability to reduce suds. For example, natural, organic, or homemade HE detergents may generate a high level of suds. Always follow the detergent manufacturer’s instructions to determine the amount of detergent to use.

Use only High Efciency (HE) detergent.

Spray Rinse

Select cycles default to a spray rinse. During these cycles, you will hear water enter the washer as the tub spins, allowing the rinse water to penetrate clothes. Check the “Cycle Guide” for details.

Accessories (on some models)

Enhance your new washer with the following genuine Whirlpool Accessories. For more information on options and ordering, call 1-800-901-2042 or visit us at: www.whirlpool.com/accessories. In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca.

Fabric Softener Dispenser

This convenient fabric softener dispenser connects to the agitator and saves you from manually adding fabric softener during the rinse cycle.

IMPORTANT:

• The lid must be closed before the washer basket lls with water and for the wash cycle to start. If the lid is open and lling stops, close the lid and press the Start/Pause button to complete the cycle.

• Some models: Rinse options must be set to either 1 Rinse w/Fabric Softener or 2 Rinses w/Fabric Softener when using fabric softener in the fabric softener dispenser. This ensures that fabric softener is added at the correct time in the rinse phase and is evenly distributed.

CONTROL PANEL AND FEATURES

Not all features and options are available on all models.

SOIL LEVEL (on some models)

Select the setting most suitable for your load. For heavily soiled and sturdy fabrics, select Heavy Soil Level for more wash time. For lightly soiled and delicate fabrics, select Light Soil Level for less wash time. A lighter soil level setting will help reduce tangling and wrinkling.

TEMPERATURE

Temperature senses and maintains uniform water temperatures by regulating incoming hot and cold water.

Select a wash temperature based on the type of fabric and soils being washed. For best results, and following the garment label instructions, use the warmest wash water safe for your fabric.

■ On some models and cycles, warm and hot water may

be cooler than your previous washer.

■ Even in a cold and cool water wash, some warm water

may be added to the washer to maintain a minimum temperature. All rinses are cold.

RINSE

The following options may be added to most cycles. See “Cycle Guide” for additional details.

1 RINSE This option is used to limit a cycle to one rinse.

2 RINSES This option can be used to automatically add a second rinse to most cycles.

1 RINSE W/FABRIC SOFTENER

This option must be selected if using fabric softener during a cycle. It ensures that fabric softener is added at the correct time in the rinse for even distribution.

2 RINSES W/FABRIC SOFTENER

This option turns on both the Fabric Softener and the 2 Rinses option.

WATER LEVEL

Set the Water Level knob to the Auto Sensing setting and the washer will automatically sense the appropriate water level for the load size and type.

Set the Water Level knob to the Deep Water Wash setting and the washer will ll to the maximum water level.

NOTE: Expect longer cycles times due to extended ll times when using the Deep Water Wash option.

Appearance may vary.

WASH CYCLE KNOB

Use the Wash Cycle knob to select cycles on your washer. See “Cycle Guide” for detailed descriptions of cycles.

START/PAUSE BUTTON

Press to start the selected cycle; press again to pause the cycle and unlock the lid.

NOTE: If the washer is spinning, it may take several minutes to unlock the lid. Press and hold for 3 seconds to cancel a cycle and drain the water from the washer.

CYCLE STATUS LIGHTS

The Cycle Status Lights show the progress of a cycle. At each stage of the process, you may notice sounds or pauses that are different from your previous washer.

SENSING FILL

When the Start/Pause button is pressed and the Water Level knob is set to Auto Sensing, the washer will ll and begin sensing to determine load size and balance. Once sensing is complete, the washer will ll to the appropriate level for the detected load size and then begin the wash phase of the cycle.

NOTE: Sensing and wash phases will be paused by opening the unlocked lid. Close the lid to resume the cycle. If the lid is left open for more than 10 minutes, the washer will cancel the cycle and pump out the water. The lid will lock after the wash phase to begin the initial spinout and remain locked for the remainder of the cycle.

WASH

The washer will ll to the correct water level based on the load size and the Water Level selection. Certain cycles may agitate during the ll process to boost cleaning. You will hear the agitator rotate followed by a pause lasting several seconds. When the wash cycle begins, you will hear the agitator increase speed. The motor sounds may change at different stages in the wash cycle while the washer performs different wash actions.

RINSE

Certain cycles use a spray rinse, which adds water to the tub while the basket spins. On some models: When a fabric softener option is selected, you will hear sounds similar to the wash cycle as the washer rinses and moves the load. You may hear the motor turning on briey (short hum) to move the basket while lling.

SPIN

The washer spins the load at increasing speeds for proper water removal based on the selected cycle and spin speed.

DONE

Once the cycle is complete, this light will come on. For best results, remove the load promptly.

LID LOCKED

The Lid Lock feature allows for higher spin speeds. When lit, the lid is locked and cannot be opened without pausing the cycle. When the light is off, the lid can be opened.

To open the lid after it has been locked, press the Start/Pause button. The lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Press the Start/Pause button while the lid is closed to resume the cycle.

CYCLE GUIDE

For best fabric care, choose the cycle that best ts the load being washed. Recommended settings for best performance are shown in Bold. Not all cycles and options are available on all models. Not all settings and options are available on each cycle.

Items to wash: Cycle: Temperature*: Spin

Lightly soiled fabrics Quick Wash Hot

Machine-wash silks, hand-washed fabrics

No-iron fabrics, cottons, permanent press, linens, synthetics

Bright or darkly colored cottons, linens, casual and mixed loads

Cottons, linens, and mixed-garment loads

Heavily soiled sturdy fabrics, colorfast items, towels, jeans

Sturdy fabrics, colorfast items, towels, jeans

Large items such as sheets, sleeping bags, small comforters, jackets, small, washable rugs

Delicate Hot

Casual Hot

Cold Wash Cold High Cold water with an additional wash action gently lifts

Normal Hot

Super Wash Hot

Heavy Duty/

Heavy

Bulky Items/

Sheets

Warm

Cool Cold

Tap Cold

Warm

Cool

Cold

Tap Cold

Warm

Cool Cold

Tap Cold

Warm

Cool Cold

Tap Cold

Warm

Cool Cold

Tap Cold

Hot

Warm

Cool Cold

Tap Cold

Hot

Warm

Cool Cold

Tap Cold

Cycle Details:

Speed:

High Use this cycle to quickly wash a small number of lightly

soiled items.

Low Use this cycle to wash lightly soiled garments indicating

“Machine Washable Silks” or “Gentle” cycle on the care label. Place small items in mesh garment bags before washing.

Low Use this cycle to wash loads of no-iron fabrics such as sport

shirts, blouses, casual business clothes, permanent press, and blends.

stains while caring for fabrics. Settings may be adjusted as desired but must use only cold water settings.

High Use this cycle for normally soiled cottons and mixed-fabric

loads.

High Provides maximum water temperatures and water levels

while using the most aggressive wash actions for tough stains and soils. Use this cycle for heaviest soiled sturdy items.

High Use this cycle for heavily soiled sturdy items.

Low Use this cycle to wash large items such as jackets and small

comforters. The washer will ll with enough water to wet down the load before the wash portion of the cycle begins and uses a higher water level than other cycles.

NOTE: If you are using fabric softener, be sure to select either 1 Rinse with Fabric Softener or 2 Rinses with Fabric Softener. *All rinses are cold.

+ 14 hidden pages