How it Works
Crosley
Loading...
CS22AEXHW00
Owner’s Manual
24 pgs3.32 Mb0

Crosley CS22AEXHW02, CS22AEXHW01, CS22AEXHW00, CS22AEXHN02, CS22AEXHN01 Owner’s Manual

iiI
SIDEBYSIDE
REFRIGERATOR
Table of Contents .......... 2
2211602
www.crosley.com
TABLEOFCONTENTS
REFRIGERATOR SAFETY .......................................................... 3
INSTALLING YOUR REFRIGERATOR .......................................... 4
USING YOUR REFRIGERATOR .................................................. 10
Ensuring Proper Air Circulation .................................................. 10
Setting the Controls ................................................................... 10
Adjusting Control Settings ......................................................... 10
Water and Ice Dispensers .......................................................... 11
Interior Water Filtration System ................................................. 12
Ice Maker and Storage Bin/Bucket ............................................ 12
REFRIGERATOR FEATURES ...................................................... 13
Refrigerator Shelves ................................................................... 13
Lateral Adjustable Shelf ............................................................. 13
Flip-up Shelf ............................................................................... 14
Adjustable Flip-up Shelf ............................................................. 14
Dell Drawer ................................................................................. 14
Convertible Vegetable/Meat Drawer, Crisper and Covers ........14
Convertible Vegetable/Meat Drawer Temperature Control .......15
Crisper Humidity Control ........................................................... 15
Utility or Egg Bin......................................................................... 15
Wine or Can/Bottle Rack ........................................................... 15
FREEZER FEATURES .................................................................. 16
Freezer Shelf .............................................................................. 16
DOOR FEATU RES ........................................................................ 16
Door Rails ................................................................................... 16
Door Bins .................................................................................... 16
Can Rack .................................................................................... 16
CARING FOR YOUR REFRIGERATOR ....................................... 17
Cleaning Your Refrigerator ......................................................... 17
Changing the Light Bulbs ........................................................... 17
Power Interruptions .................................................................... 18
Vacation and Moving Care ......................................................... 18
TROUBLESHOOTING .................................................................. 19
ASSISTANCE OR SERVICE ......................................................... 22
Accessories ................................................................................ 22
WATER FILTER CERTIFICATIONS ............................................. 22
PRODUCT DATA SHEETS ....................................................... 23
REFRIGERATOR WARRANTY ................................................. 24
REFRIGERATORSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance, Always read and obey all safety messages.
This symbol alerts you to potential hazards that can kill or hurt you and others,
All safety messages will follow the safety alert symbol and either the word "DANGER" or
This is the safety alert symbol,
"WARNING," These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed,
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic
precautions:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Disconnect power before servicing.
• Replace all panels before operating.
• Remove doors from your old refrigerator.
• Use nonflammable cleaner.
• Keep flammable materials and vapors, such as gasoline, away from refrigerator.
• Use two or more people to move and install refrigerator.
• Disconnect power before installing ice maker (on ice maker kit ready models only).
• Use a sturdy glass when dispensing ice or water (on some models).
SAVETHESEINSTRUCTIONS
ProperDisposalof
YourOld Refrigerator
Suffocation Hazard
Remove doors from your old refrigerator. Failure to do so can result in death or
brain damage.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous
- even ifthey will sit for "just a few days." Ifyou are getting rid of your old refrigerator, please follow these instructions to help
prevent accidents.
Before you throw away your old refrigerator or freezer:
• Take off the doors.
• Leave the shelves in place so that children may not easily
climb inside.
INSTALLINGYOUR
REFRIGERATOR
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
Removing packaging materials
• Remove tape and any labels from your refrigerator before
using (except the model and serial number label). To remove any remaining tape or glue, rub the area briskly
with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For more information, see the "Refrigerator Safety" section.
IMPORTANT: Do not remove any permanent instruction labels inside your refrigerator, or the Tech Sheet that is fastened to the base grille.
When Moving Your Refrigerator: Your refrigerator is heavy. When moving the refrigerator
for cieaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or "walk" the refrigerator when trying to move
it, as floor damage could occur.
Cleaning before use
After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions in the "Caring for Your Refrigerator" section.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many smalI, pebble-size pieces. This is normal. Gtass shelves and covers are heavy. Use specia! care when re- moving them to avoid impact from dropping.
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion,
or fire.
• To ensure proper ventilation for your refrigerator, allow for
.5 in. (1.25 cm) space on each side and at the top.
_Jl,
,,J
,/
/
.5" (1.25 crn)
II -- I!
J
2" (5°08era)
If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. The refrigerator can be flush against the back wall if you do
not have an ice maker installed. If you are installing your refrigerator next to a fixed wall, leave
2 in. (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open.
NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in
death, fire, or electrical shock.
Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical
connection:
Recommended grounding method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded
electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord. NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the control, (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.
To remove the base grille:
1. Open both refrigerator doors.
2. Place hands along the ends of the grille, with your thumbs
along the top. Push in with your thumbs and pull up on the bottom.
NOTE: Be sure to refasten the Tech Sheet behind the base grille after cleaning.
To replace the base grille:
1. Open the doors.
2. Line up the grille support tabs with the metal clips.
3. Push the grille firmly to snap it into place.
TOOLSNEEDED:1/4in.hex-headsocketwrench,%6in.hex-headsocketwrenchandaflat-headscrewdriver.
IMPORTANT:Beforeyoubegin,turntherefrigeratorcontrolOFF,unplugrefrigeratorordisconnectpower.Removefoodandany adjustabledoororutilitybinsfromdoors.
Electrical Shock Hazard
Disconnect power before removing doors. Reconnect both ground wires before operating.
Failure to do so can result in death or electrical shock.
Top Left Binge
Style 1
Style 2
1, Do Not Remove Screw
Door RemovaJ
Top Right Binge
Style 1
Style 2
Handle Removal
(OptionaJ)
1. Do Not Remove Screw
Bottom Binge
1, Do Not Remove Screw
Door Alignment
\\
\
1, Leveling Screw
Tools Needed: 1/4in. hex-head socket wrench, %6 in. hex-head
socket wrench and a flat-head screwdriver. NOTE: It may only be necessary to remove either the door handle
or the doors to get your product through the doorway of your residence. Measure the door opening to determine whether to remove the refrigerator handles or the doors.
Handle Removal (optional)
1. Apply firm pressure with your hand on the face of trim. Slide top trim up and bottom trim down away from handle. Lift trim pieces off shoulder screws (see Graphic 1).
NOTE: Some models include accent pieces between the handle and the handle trim. If your model includes the accents, you will need to carefully remove them with a flat-head screwdriver before removing the handle screws. The accent pieces are optional and can be reinstalled or left off of the handle assembly.
2. Remove handle screws and handles.
3. Move refrigerator into place. Replace handles as shown (see Graphic 1).
Door Removal
Door and Hinge Replacement
1. Replace both bottom hinges, if removed. Tighten screws.
2. Assistance may be needed to feed the water dispenser tubing through the bottom hinge while reinstalling the freezer door. Carefully feed the dispenser tubing through the bottom left hinge before replacing the door on the hinge.
NOTE: Provide additional support for the doors while the top hinges are being replaced. Do not depend on the door magnets to hold the doors in place while you are working.
3. Align and replace the top left hinge as shown (see Graphic 4). Tighten screws.
Electrical Shock Hazard
Reconnect both ground wires. Failure to do so can result in death or
electrical shock.
Electrical Shock Hazard
Disconnect power before removing doors. Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Open both refrigerator doors. Remove the base grille by pulling up on the bottom outside corners (see Graphic 2).
3. Close both doors and keep them closed until you are ready to lift them free from the cabinet.
4. If you have a dispenser (ice or water), disconnect the water dispenser tubing located behind the base grille. Remove hose from clip (see Graphic 3).
• Disconnect union nut.
• Remove union nut and spring.
5. Remove top left hinge cover and screws as shown (see Graphic 4). DO NOT REMOVE SCREW 1.
6. Disconnect wiring plug and both ground wires (see Graphic 4).
7. Carefully lift freezer door straight up off bottom hinge (see Graphic 5). The water dispenser tubing remains attached to the freezer door and pulls through the bottom left hinge. Make sure you protect the dispenser tubing from damage.
8. Remove top right hinge cover and screws as shown (see Graphic 6). DO NOT REMOVE SCREW 1.
9. Lift the refrigerator door straight up off bottom hinge.
10. It may not be necessary to remove the bottom hinge to move the refrigerator through a doorway. Both bottom hinges have
similar construction.
• Disassemble the hinges as shown (see Graphic 7). DO
NOT REMOVE SCREW 1.
4. Reconnect both ground wires.
5. Reconnect wiring plug.
6. Replace left hinge cover and screws.
7. Replace the refrigerator door by carefully lifting the door onto the bottom right hinge.
8. Align and replace the top right hinge as shown (see Graphic 6). Tighten screws.
9. Replace hinge cover and screws. Tighten screws.
10. Plug into a grounded 3 prong outlet.
Door Closing Your refrigerator has two front adjustable rollers -- one on the
right and one on the left. If your refrigerator seems unsteady or if you want the doors to close more easily, adjust the refrigerator's tilt using the instructions below:
1. Move the refrigerator into its final position.
2. The two leveling screws are part of the front roller assemblies which are at the base of the refrigerator on either side (see Graphic 8).
3. Use a screwdriver to adjust the leveling screws. Turn the leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator (see Graphic 8).
NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers. This makes it easier to adjust the screws.
4. Open both doors again and check to make sure that they close as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns, and you should turn both leveling screws the same amount.
5. Replace the base grille.
NOTE: Be sure to refasten the Tech Sheet behind the base grille.
5. Using a grounded drill, drill a 1/4in. hole in the cold water pipe you have selected.
..........1
Read all directions carefully before you begin. IMPORTANT:
• If operating the refrigerator before installing the water connection, turn ice maker to the OFF position to prevent operation without water.
• All installations must be in accordance with local plumbing code requirements.
• Use copper tubing and check for leaks.
• Install copper tubing only in areas where temperatures will remain above freezing.
• It may take up to 24 hours for your ice maker to begin producing ice.
Tools required:
• Standard screwdriver
• 7i6 in. and 1/2in. open-end wrenches or two adjustable wrenches
• 1/4in. nut driver
• ¼ in. drill bit
• Hand drill or electric drill (properly grounded)
NOTE: Your refrigerator dealer has a kit available with a 1/4in. (6.35 mm) saddle-type shut-off valve, a union, and copper
tubing. Before purchasing, make sure a saddle-type valve
complies with your local plumbing codes. Do not use a piercing-
type or s_6in. (4.76 mm) saddle valve which reduces water flow
and clogs more easily.
Cold water supply
The ice maker water valve contains a flow washer which is used
as a water pressure regulator. The ice maker needs to be connected to a cold water line with water pressure between 30 and 120 psi. If a problem occurs, call your utility company.
Connecting to water line:
1. Unplug refrigerator or disconnect power.
2. Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.
3. Locate a 1/2in. to 11/4in. (12.7 mm to 3.18 cm) vertical COLD water pipe near the refrigerator.
NOTE: Horizontal pipe will work, but the following procedure must be followed: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. This also keeps normal sediment from collecting in the valve.
4.
To determine the length of copper tubing you will need, measure from connection on lower left rear of refrigerator to water pipe. Add 7 ft. (2.1 m) to allow for moving refrigerator for cleaning. Use 1/4in. (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.
7 ......................... 2
.... ...................3
1.Cold WaterPipe
2.Pipe Clamp
3.Copper Tubing
4.Compression Nut
5. Compression Sleeve
6.Shut-Off Valve
7.Packing Nut
6. Fasten shut-off valve to cold water pipe with pipe clamp. Be sure outlet end is solidly in the 1/4in. drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing, especially if soft (coiled) copper tubing is used. Now you are ready to connect the copper tubing.
7. Slip compression sleeve and compression nut on copper tubing as shown. Insert end of tubing into outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.
8. Place the free end of the tubing into a container or sink, and turn ON main water supply and flush out tubing until water is clear. Turn OFF shut-off valve on the water pipe. Coil copper tubing.
Connecting to refrigerator:
1. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help prevent damage to the tubing when the refrigerator is pushed back against the wall. Move to step 2.
2. Turn shut-off valve ON. Cheek for leaks. Tighten any connections (including connections at the valve) or nuts that
leak.
2
1. Tube Clamp
2. Copper Tubing
3. Compression Nut
4. Valve Inlet
The ice maker is equipped with a built-in water strainer. If local water conditions require periodic cleaning or a well is your source of water supply, a second water strainer should be installed in the 1/4in. (6.35 mm) water line. Obtain a water strainer from your nearest appliance dealer. Install at either
tube connection.
4. Plug in refrigerator or reconnect power.
Loading...
+ 16 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use