Crosley CR6231D User manual

CR6231D

Dansette Sterling Turntable

Instruction Manual

Questions, problems, missing parts ?

Before returning to the store, call Customer Service

8 a.m. – 6 p.m., EST, Monday – Friday

1-888-CROSLEY

www.crosleyradio.com

English

Safety Instructions

Read and understand this entire manual before using this product. Keep these instructions for future reference.

1. Do not use this product near water.

2. This product should be operated only by the type of power source indicated on the marking label or in this i nstru cti on manu al.

3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet try reversing the plug. If the plug should still fail to fit, contact your electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fir e or electric shock .

6. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

9. Do not use attachments not recommended by the product manufacturer as they may cause hazards.

10. A product and cart combination should be moved with care. Q uick sto ps, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings.

12. Unplug the product during lightning storm or when unused for long periods of time.

English

Items in this package

Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package:

• Turntable

• 45 RPM adapter

• 3.5mm aux in cable

• Power adaptor

Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.

Specifications

Power AC power adaptor, DC output 12V 0.5A Power consumption 12W Speaker 3.5”, 8Ω, 5W x 2 Turntable speed 331/3, 45RPM Replacement needle Crosley NP5

Note:

• Design and specifications are subject to change without notice.

•

To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, you will need to turn off the power and turn it on again.

English

Product Description

1. On/Off-Volume Knob

2. Headphone Jack

3. Line In Jack

4. Function Knob

5. Power Jack

6. RCA Jacks

7. Turntable Platter

8. Turntable Spindle

9. Speed Switch

10. Tonearm

11. Auto-stop Switch

12. Hold Down Clip

13. Tonearm Rest

14. Pitch Control

15. 45 RPM Adapter

English

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Remove the tie-wrap that is holding the tonearm.

3. Connect AC adaptor to the Power Jack of the unit.

Note: Do not plug the AC power adaptor to power outlet before all the assembly is completed. Before turning the power on, make sure again all the connection settings are correct. Always turn off the power when connecting or disconnecting.

Stereo System Connection

RCA Jacks

• The RCA Jacks output analog line-level signals and could be connected

directly with a pair of active/powered speakers or the appropriate input of your stereo system.

• The Red plug connects with the Right channel and the White plug connects

with the Left channel.

Note: The RCA Jacks are not designed to be connected directly to the passive/unpowered speakers. If connected to the passive speakers, the volume level will be very low.

Aux Input Connection

You can connect an audio device to this unit and play your music through its speakers. To do this, rotate the Function Knob to / Aux In mode, connect the

3.5mm auxiliary cable between your audio device and the Aux In Jack of this

unit and start playing.

Note: The Bluetooth and Aux In modes are shared under the same Function Switch position. When an auxiliary cable is plugged into the Aux In Jack, the Aux In function will override the Bluetooth function.

Turntable Operation

1. Rotate the On/Off Volume Knob to turn on the power.

2. Rotate the Function Knob to PHONO position.

3. Set the Speed Switch accordingly.

4. Place the record on the turntable. Use the 45 RPM Adapter if necessary.

5. Remove the stylus protector from the stylus assembly.

Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned.

English

6. Release the tonearm Hold Down Clip.

Note: when the turntable is not in use, remember to lock back hold down clip.

7. Lift up the tonearm and move it over the record where play is desired to begin.

Gently put down the tonearm and begin the playback.

8. When the record is finished playing, gently lift up the tone arm and move it

back to the tonearm rest.

9. Lock the Tonearm Clip to secure the tonearm.

Platter Auto-stop

If the Auto-stop Switch is set to ON position, th e platter will stop spinning automatically when the record plays to the end. In some rare occasion, if the turntable stops playing before the end of the record, set the switch to OFF position the turntable should overcome this issue.

Pitch Control

The turntable speed can be increased or decreased by approximately 10% by rotating the Pitch Control Knob. To increase the speed, turn the Pitch Control Knob clockwise. To decrease the speed, turn the knob counter-clockwise.

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle.

2. Pull needle forward.

3. Pull out and remove.

Installing Needle

1. Position the needle with its tip facing down.

2. Line up the back of the needle with the cartridge.

3. Insert the needle with its front end at a downward angle and gently lift the

front of the needle upward until it snaps into place.

English

Bluetooth Operation

1. Turn the Function Knob to / Aux In mode, you will hear an activation sound

from the unit.

2. Turn on the Bluetooth feature of your audio device, search for “Crosley

CR6231” and pair.

3. Once your device is successfully paired with the unit, you will hear a short

confirmation sound from the unit.

4. Play and stream music from your device to the unit.

Note:

• Bluetooth version - 4.1

• The Bluetooth and Aux In modes are shared under the same Function Switch position.

Make sure no auxiliary cable is plugged into the Aux In jack.

Turntable Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the

turntable mat or a record’s edge.

2. Clean the stylus frequently with a soft brush with a back-to-front motion only.

3. Clean the records to get rid of dust or grease with a record cleaning brush

and record cleaning solution.

4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber

cloth.

Note: Do not use cleanser other that contains alcohol, benzene or any other harsh chemicals, which might damage the paint and finish of the turntable.

** Crosley offers a product line of different cleaning accessories. Please ask your retailer or check out our website www.crosleyradio.com more cleaning product information.

for

English

Troubleshooting

There is no power

• Power adaptor is not connected correctly .

• No power at the power outlet.

• To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, turn off the power and turn it on again.

Power is on, but the platter does not turn

• Turntable mode is not selected.

• Turntable’s drive belt has slipped off.

Turntable is spinning, but there is no sound or sound not loud enough

• Stylus protector is still on.

• The input gain of the amplified speaker or similar device may be too low.

Bluetooth is not functioning when it is under Bluetooth mode

• An auxiliary cable is plugged into the Aux In jack, unplug it.

English

FCC Statement s

FCC Caution:

1. This device complies with Part 15 of the FCC rules/ Industry Canada license-exempt RSS

standard(s). Operatio n is subj ec t to the follo wi ng t wo con diti o ns: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause

undesired operatio n.

2. This device and its antenna(s) must not be co-located or operating in conjunction with any other

antenna or transmitter.

3. Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user authority to operate the equi pm e nt.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for help.

+ 18 hidden pages