Crosley CRG3150PSA, CRG3480PWA, CRG3150PWA, CRG3480PBA, CRG3150PBA Instructions For
...
GRLP4 CONVERSION KiT APPLiCATiON iNSTRUCTiONS
INSTALLATION AND SERVICE MUST BE PERFORMED BY
A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This conversion kit must be installed by a qualified service technician in accordance with the manufacturer's
instructions and all applicable codes and requirements of the authority having jurisdiction. Failure to follow instructions may result in
fire, explosion or production of carbon monoxide causing property damage, personal injury or toss of life. The qualified service agency
is responsible for the proper installation of this kit. The installation is not proper and complete until the operation of the converted
appliance is checked as specified in the manufacturer's instructions supplied with this kit.
Before proceeding with the conversion, shut off the gas supply and disconnect the electrical power to the range. Be
sure both power supplies are off before installing the conversion kit. Failure to do so could cause serious bodily injury.
IMPORTANT: Do n0t attempt to use this conversion kit on products for whic h it is not specifically designated. Consult the ......
product installation manual or parts list to determine the correct conversion kit number prior to use,
GRLP4 CONVERSION KiT - CONTENTS
QTY Part Number
1 316255600
1 316527507
1 316527512
1 316527503
5 316527501
1 316527505
2 316527515
1 316527516
item Description Notes
Label, Insert Kit Screw Down Burner
Orifice 16,000 Btu/h size 1.18
Orifice 14,000 Btu/h size 1.09
Orifice 12,000 Btu/h size 1.02
Orifice 9,500 Btu/h size .93
Orifice 5,000 Btu/h size .66
Orifice 15,000 Btu/h size .84
Orifice 750 Btu/h size .22
For Screw Mounted Burner (Style 1)
For Screw Mounted Burner (Style 1)
For Screw Mounted Burner (Style 1)
For Screw Mounted Burner (Style 1)
For Screw Mounted Burner (Style 1)
For Screw Mounted Burner (Style 2)
For Screw Mounted Burner (Style 2)
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Part
Number
316005233
316005234
316005245
316005246
316005247
316005248
316005249
316005250
316005251
316005252
316005253
316005254
316005255
316005256
316005257
316005258
316005265
316005266
316005269
Description
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Surface Burner Combination
4-9.5k
4-9.5k
3-9.5k, 1-12k
3-9.5k, 1-12k
3-9.5k, 1-14k
3-9.5k, 1-14k
2-9.5k, 1-12k, 1-5k
2-9.5k, 1-12k, 1-5k
2-9.5k, 1-5k, 1-14k
2-9.5k, 1-5k, 1-14k
1-9.5k, 1-12k, 1-5k, 1-16k
1-9.5k, 1-12k, 1-5k, 1-16k
2-9.5k, 1-12k, 1-5k, 1-16k
2-9.5k, 1-12k, 1-5k, 1-16k
4-9.5k, 1-5k
4-9.5k, 1-5k
1-9.5k, 1-12k, 1-5k, 1-14k
1-9.5k, 1-12k, 1-5k, 1-14k
1-9.5k, 1-14k, 1-12k, 1-5k
Tools Required for L.R Conversion:
(A) 3/8", 1/2" and 5/8" Open End Wrench
(B) #1 Square Tip Screwdriver
(C) 1/8" Wide Flat Blade Screwdriver
(D) 7mm & 3/16" Nutdriver
Qty
1
316005270
1
316005294
1
316005293
1
316005292
1
316005291
1
316005288
1
316005287
1
316005286
1
316005285
1
316005284
1
316005283
1
316005282
1
316005281
1
316005280
1
316005279
1
316005278
1
316005277
1
316005296
1
316005295
A_ a_
C_ _ D_
Part
Number
Description
Rating Plate - French
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Rating Plate - French
Rating Plate - English
Surface Burner Combination
1-9.5k, 1-14k, 1-12k, 1-5k
1-16k, 1-12k, 2-9.5k, 1-5k
1-16k, 1-12k, 2-9.5k, 1-5k
1-12k, 4-9.5k
1-12k, 4-9.5k
1-15k, 1-14k, 2-9.5k, 1-5k
1-15k, 1-14k, 2-9.5k, 1-5k
1-14k, 3-9.5k, 1-5k
1-14k, 3-9.5k, 1-5k
5-9.5k
5-9.5k
1-16k, 1-12k, 2-9.5k, 1-5k
1-16k, 1-12k, 2-9.5k, 1-5k
1-16k, 1-14k, 1-9.5k, 1-5k
1-16k, 1-14k, 1-9.5k, 1-5k
1-16k, 1-14k, 2-9.5k, 1-5k
1-16k, 1-14k, 2-9.5k, 1-5k
1-14k, 1-12k, 2-9.5k, 1-5k
1-14k, 1-12k, 2-9.5k, 1-5k
p/n 316417536 (1007) 1
How to Convert the Range for use with
LP/Propane Gas
Electrical Shock Hazard can occur and
result in serious injury or death. Disconnect electrical
power to the range before removing the warmer drawer
for servicing.
1. Access gas regulator:
To access the gas regulator, remove the storage drawer or
warmer drawer. If equipped with a storage drawer, open and
remove the drawer completely. For models equipped with
a front panel, remove the front panel and skip steps a & b
below. For models equipped with warmer drawer, follow all the
instructions below to remove the warmer drawer.
NOTE: Do not attempt to convert models that feature a lower
oven.
a. Locate glide lever on each side of drawer, pull up on the
left glide lever and push down on the right glide lever
(See Fig. 1).
b. Pull the drawer away from the range.
2. Convert the pressure regulator:
Electrical Shock Hazard can occur and
result in serious injury or death, Disconnect electrical
power to the range before removing the warmer drawer
for servicing.
a. Remove the pressure regulator access cover (if equipped).
DO NOT REMOVE the pressure regulator or allow itto turn.
b. Remove the dust protector from the cap (See Fig. 2 -
some models). Use a wrench to remove the cap from the
pressure regulator (all models). Remove any gaskets.
c. Follow the remaining conversion instructions depending on
your pressure regulator style provided in Figs. 3 or 4. Once
set for L.R/Propane replace gasket and cap then tighten.
Left-hand rail release
Right-hand ratit/release Fig. 1
Remove storage drawer
for front access to
pressure regulator.
Pressure regulator
Place hollow end of cap
towards regulator for
NATURAL GAS. When
finished replace & tighten
using gasket.
Fig. 3
Remove Dust Protector
while converting. When
finished replace over cap.
Cap
Place solid end of cap
towards regulator for
L.P./PROPANE. When
finished replace & tighten
using gasket.
Fig. 2
Place hollow end Place solid end
towards regulator towards regulator
for NATURAL GAS. for L.R/PROPANE.
Turn Conversion Plug 1/4 turn
to remove or lock in Cap.
Conversion
Plug Ga
Fig. 4
3. Convert Surface Burners for use with LP/Propane Gas
This conversion kit contains multiple gas orifices for converting different styles
of sealed gas surface burners. Determine which style of gas surface burner is
being converted and select the proper orifice from the designated orifice pack for
that specific burner style and size.
Save the natural gas orifices removed from the appliance for possible future
conversions to natural gas.
BURNER STYLE #1 (Screw Mounted Burner) This burner is secured to the
cooktop surface by two screws as seen in the photo. The screw heads may be
different than those illustrated. When the burner is removed the orifice holder
Burner Secured With Screws Three Orifice Openings
cutout in the cooktop can be seen to have an irregular elongated shape. The
mounting screw sockets for the burner head are also visible. This style of
burner will use the orifices contained in the separate smaller envelope found
inside the main envelope of the LP kit # GRLP4. This envelope will be labeled "
SCREW MOUNTED BURNER LP KIT". Follow the instructions on page 4 when
converting this burner style.
BURNER STYLE #2 (Screw Mounted Burner) This burner can be identified by the
two piece cap as seen in the photo. It is secured to the cooktop surface by two
screws. The screw heads may be different than those illustrated. When the
burner is removed three orifice openings can be seen in the cooktop. This style
of burner will use the orifices contained in the envelope found inside the main envelope of the LP kit #
GRLP4. This envelope wilt be labeled " SCREW MOUNTED BURNER LP KIT". Follow the instructions on
page 5 when converting this burner style.
OVAL BURNERS (Oval Burner) Use orifice size .93 from envelope.
NOTE: In the case the range includes multiple burner styles, use the appropriate orifice for each
burner size.
BURNER STYLE #1
BURNER STYLE #2
BURNER STYLE #1 CONVERSION INSTRUCTIONS
Use caution when replacing each burner cap so the electrode is not damaged.
THIS COOKTOP IS NOT REMOVABLE. Do not attempt to remove this cooktop.
Example of Burner Assembly
B = 9.5k B = 9.5k
D = 12k D = 12k
E = 14 or 14.2k A = 5k E = 14 or 14.2k A = 5k
B = 9.5k
(some models)
_Round Or Oval Center Burner
B = 9.5k
B = 9.5_
D = 12k
E = 14 or 14.2k
F = 16 or 16.2
Top View Bottom View
OVAL BURNER
B = 9.5k 9.5k=10k Oval Burner B = 9.5k
(some models)
B = 9.5k
B = 9.5F
D = 12k
E = 14 or 14.2k
F = 16 or 16.2
Loading...