Crosley CAWS833RQ1, CAWS966RQ1, CAWS954SQ0, CAWS953RQ1, CAWS833ST0 Owner’s Manual
...
WASHER USERINSTRUCTIONS
INSTRUCTIONSPOUR L'UTILISATEURDE LA LAVEUSE
TableofContents/Tabledes mati@res
ASSISTANCE OR SERVICE ............................ 1
WASHER SAFETY ............................................ 1
WASHER USE .................................................. 2
WASHER CARE ................................................ 4
TROUBLESHOOTING ...................................... 5
WARRANTY ...................................................... 7
Assistance orService
If you need assistance or service, first see the "Troubleshooting"
section. Additional help is available by calling our Customer
eXperience Center at 1-800-253-1301 from anywhere in the
U.S.A., or write:
Crosley Corporation
c/o Service Dept.
675 N. Main St.
Winston-Salem, NC 27102-2111
Information may also be obtained by visiting our website at
www.crosley.com.
In Canada, for assistance, installation or service call:
1-800-807-6777, or write:
Crosley Corporation
c/o Service Dept.
675 N. Main St.
Winston-Salem, NC 27102-2111
ASSISTANCE OU SERVICE ............................. 8
SleCURITIe DE LA LAVEUSE ............................ 8
UTILISATION DE LA LAVEUSE ....................... 9
ENTRETIEN DE LA LAVEUSE ....................... 11
DlePANNAGE ................................................... 12
GARANTIE ...................................................... 15
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your appliance to help
you obtain assistance or service if you ever need it. You will need
to know your complete model number and serial number. You can
find this information on the model and serial number label, located
under the washer lid.
Dealer name
Serial number
Address
Phone number
Model number
Purchase date
WASHERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
8578242
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.
SAVE THESE INSTRUCTIONS
[] Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
[] Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach into the washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where it will be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" for grounding instructions.
WASHERUSE
For these suggested full-sized loads, set the LOAD SIZE selector to the highest load size setting.
SUPER CAPACITY and SUPER CAPACITY PLUS WASHERS
Heavy Work Clothes Mixed Load Towels Delicates
3 pair pants 3 double sheets 10 bath towels 3 camisoles
3 shirts 4 pillowcases 10 hand towels 1 quilted robe
4 pair jeans 8 T-shirts 14 washcloths 4 slips
1 coverall 6 pair shorts 1 bath mat 4 panties
1 overall 2 shirts 2 bras
2 blouses 2 nighties
8 handkerchiefs 1 baby's dress
EXTRA LARGE CAPACITY WASHERS
Heavy Work Clothes Mixed Load Towels Delicates
2 pair pants 2 double sheets or 8 bath towels 3 camisoles
3 shirts 1 king size sheet(s) 8 hand towels 4 slips
3 pair jeans 4 pillowcases 10 washcloths 4 panties
1 coverall 6 T-shirts 1 bath mat 2 bras
6 pair shorts 2 nighties
2 shirts
2 blouses
6 handkerchiefs
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion_ or fire.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death_
fire, or electrical shock.
Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach. Drop a sorted load of
clothes loosely into your washer.
• Load evenly to maintain washer balance. Mix large and
small items. Items should move easily through the wash
water. Overloading can cause poor cleaning.
2=
(OPTIONAL) Add liquid chlorine bleach.
NOTE: Follow the manufacturer's directions for proper use.
Undiluted bleach will damage any fabric it touches. The
damage appears as rips, holes, tears, or color loss and may
not show up until several washings later. To avoid spilling, use
a cup with a pouring spout. Do not let bleach splash, drip, or
run down into the washer basket. Always measure liquid
chlorine bleach. Do not guess. Do not use more than the
manufacturer's recommended amount for a full load. Use less
with a smaller load size.
Style 1: With liquid chlorine bleach dispenser (on some
models)
• Use only liquid chlorine bleach in this dispenser. Pour
measured liquid chlorine bleach into the liquid chlorine
bleach dispenser. Bleach is immediately fed into washer
and is diluted automatically during the wash part of the
cycle.
Style 2: Without liquid chlorine bleach dispenser (on some
models)
• Let the washer fill and begin agitating the load.
• Add bleach 5 minutes into the wash cycle for best
cleaning and so that bleach can be removed in the rinse
cycle. Pour bleach around the agitator, not directly onto
the load to avoid damaging clothing or other items in the
load.
3=
(OPTIONAL) Add liquid fabric softener.
NOTE: Do not spill or drip any fabric softener onto the clothes.
Undiluted fabric softener can stain fabrics. Always dilute fabric
softener with warm water. Too much fabric softener can make
some items (diapers and towels) nonabsorbent. If this
happens, do not use it every load, or use less of it in each
load.
Style 1: With liquid fabric softener dispenser (on some
models)
• Use only liquid fabric softener in this dispenser. Pour
measured liquid fabric softener into the dispenser.
Softener is added automatically during the rinse portion of
the cycle. Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches the
crossbar in the dispenser opening.
Style 2: Without liquid fabric softener dispenser (on some
models)
• In the final rinse ONLY, add fabric softener that has been
diluted with _/2to 1 cup (125 to 250 mL) warm water.
4=
Close the washer lid. Washer will not agitate or spin with the
lid open.
5.
Turn the LOAD SIZE or WATER LEVEL selector to the correct
setting for your wash load and the type of fabric being
washed. You may change the load size or water level selection
after the washer has started filling by turning the selector to a
different setting.
6. SettheTEMPERATUREselectortothecorrectsettingforthe
typeoffabricandsoilsbeingwashed.Usethewarmestwash
watersafeforfabric.Followgarmentlabelinstructions.
NOTE:Inwashwatertemperaturescolderthan60°F(15.6°C),
detergentsdonotdissolvewell.Soilscanbedifficultto
remove.Somefabricscanretainwearwrinklesandhave
increasedpilling(theformationofsmalllint-likeballsonthe
surfaceofgarments).
7. (OPTIONAL)EXTRARINSEselector(onsomemodels).Foran
additionalrinseandspinattheendofawashcycle,setthe
EXTRARINSEselectortoON.Onsomemodels,theEXTRA
RINSEfeatureispartofthecycle.
8. (OPTIONAL)SomemodelshaveanENDOFCYCLESIGNAL
selector.SetthisselectortoONifyouwantyourwasherto
alertyouwhenthewashcycleiscomplete.
WASHERCARE
S _ =i _ ,+ _, _ > '_ _ _ _
g.
Push in the Cycle Control knob and turn it clockwise to the
wash cycle you want. Reduce the wash time when using a
small load size setting. Pull out the Cycle Control knob to start
the washer.
To stop or restart your washer:
• To stop the washer at any time, push in the Cycle
Control knob.
• To restart the washer, close the lid (if open) and pull out the
Cycle Control knob.
Use a soft, damp cloth or sponge to wipe up any spills such as
detergent or bleach from the outside of your washer.
Clean your washer interior by mixing 1 cup (250 mL) of chlorine
bleach and 2 cups (500 mL) of detergent. Pour this mixture into
your washer and run it through a complete cycle using hot water.
Repeat this process if necessary.
Remove any hard water deposits using only cleaners labeled as
washer safe.
Cleaning the liquid fabric softener dispenser (on some
models):
1. Remove dispenser by grasping top with both hands and
squeezing, while pushing upward with thumbs.
2. Rinse dispenser under warm water, then replace it.
NOTE: Some models are equipped with a liquid fabric softener
dispenser. To avoid damage to the washer or clothing, do not
wash clothes with the liquid fabric softener dispenser removed or
add detergent or bleach to this dispenser; it is for liquid fabric
softener only.
Replace inlet hoses after 5 years of use to reduce the risk of hose
failure. Periodically inspect and replace inlet hoses if bulges,
kinks, cuts, wear or leaks are found.
When replacing your inlet hoses, mark the date of replacement on
the label with a permanent marker.
Because some water may stay in the hoses, freezing can damage
your washer. If storing or moving your washer during freezing
weather, winterize it.
Winterizing your washer
1. Shut off both water faucets. Disconnect and drain water inlet
hoses. Pour 1 qt (1 L) of R.V.-type antifreeze into the basket.
2. Run washer on a drain and spin setting for about 30 seconds
to mix the antifreeze and remaining water.
3. Unplug washer or disconnect power.
To use washer again
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord,
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in washer or reconnect power.
3. Run the washer through a complete cycle with 1 cup (250 mL)
of detergent to clean out antifreeze.
Storage, non-use or vacation care
Operate your washer only when you are at home. If you will be on
vacation or not using your washer for an extended period of time,
you should:
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer. This helps avoid
accidental flooding (due to a water pressure surge) while you
are away.
TROUBLESHOOTING
Firsttry the solutions suggested here and possibly avoid the cost of a service call...
W:_ _:h:_ @'d Co ":_4:SOA®AI'S
Noisy
• Is the load balanced and the washer level? The wash load
should be balanced and not overloaded. The washer must be
level. The front feet should be properly installed and the nuts
tightened. Reset the rear leveling legs (if needed). See the
Installation Instructions.
• Did you completely remove the yellow shipping strap with
cotter pins? See the Installation Instructions.
• Are the gears engaging after the drain and before spin, or
is the upper part of agitator clicking during wash? These
are normal washer noises.
Leaking
• Checkthe following:
Are the fill hoses tight?
Are the fill hose washers properly seated?
Is the drain hose clamp properly installed? See the Installation
Instructions.
• Is the sink or drain clogged? Sink and standpipe must be
able to handle 17 gal. (64 L) of water per minute.
• Is water deflecting off the tub ring or the load? Center the
tub before starting the washer. The wash load should be
balanced and not overloaded, The fill or spray rinses can
deflect off the load. The washer must be level, The front feet
should be properly installed and the nuts tightened, Reset the
rear leveling legs (if needed), See the Installation Instructions.
• Check household plumbing for leaks.
Basket crooked
• Was the washer basket pulled forward during loading?
Push the basket to the center before starting wash.
• Is the load balanced and the washer level? The wash load
should be balanced and not overloaded, The washer must be
level. The front feet should be properly installed and the nuts
tightened. Reset the rear leveling legs (if needed), See the
Installation Instructions,
• The washer basket moves while washing. This is normal,
Agitator operation
• The top of the agitator is loose, or moves in only one
direction. This is normal,
Dispensers clogged or bleach leaking
• Did you follow the manufacturer's directions when adding •
detergent and fabric softener to the dispensers (on some
models)? Measure detergent and fabric softener. Slowly pour
into the dispensers. Wipe up all spills. Dilute fabric softener in
the fabric softener dispenser.
• Did you put powdered or color-safe bleach in the liquid
chlorine bleach dispenser (on some models)? Add
powdered or liquid color-safe bleach directly to the basket. Do
not use the chlorine bleach dispenser for color-safe bleach.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord,
Failure to follow these instructions can result in death,
fire, or electrical shock.
Washer won't run, fill, rinse or agitate; washer stops
• Is the power cord plugged into a grounded 3 prong outlet?
Plug power cord into a grounded 3 prong outlet.
• Are you using an extension cord? Do not use an extension
cord.
• Is the indicator on the Cycle control knob properly lined
up with a cycle? Turn the Cycle control knob to the right
slightly and pull to start.
• Are the water inlet valve screens clogged? Turn off the
water and remove inlet hoses from the washer. Remove any
accumulated film or particles. Reinstall hoses, turn on water
and check for leaks.
• Are both the hot and cold water faucets turned on? Turn
on the water.
• Is the water inlet hose kinked? Straighten the hoses,
• Does the water level seem too low, or does the washer
appear to not fill completely? The top of the agitator is much
higher than the highest water level. This is normal and
necessary for clothes to move freely.
• Has a household fuse blown, or has a circuit breaker
tripped? Replace the fuse or reset the circuit breaker. If the
problem continues, call an electrician.
• Is the washer in a normal pause in the cycle? The washer
pauses for about 2 minutes during certain cycles. Allow the
cycle to continue. Some cycles feature periods of agitation
and soak.
Is the washer overloaded? Wash smaller loads.
Is the lid open? The lid must be closed during operation,
Washer will not agitate or spin with the lid open,
Loading...