Crosley CSWS16445WQ0, CAWSS16445WQ0, CAWS16445WQ0, CAWS14234VQ0 Owner’s Manual

WASHERUSERiNSTRUCTiONS
iNSTRUCTiONSPOUR L'UTILISATEURDELA LAVEUSE
Table of Contents / Table des mafi res
ASSISTANCE OR SERVICE ......................................................... 1
ACCESSORIES .............................................................................. 1
WASHER SAFETY ......................................................................... 2
WASHER USE ............................................................................... 3
WASHER CARE ............................................................................. 4
TROUBLESHOOTING ................................................................... 5
WAR RANTY ................................................................................... 8
ASSISTANCE OU SERVICE ......................................................... 9
ACCESSOIRES .............................................................................. 9
S_eCURIT_e DE LA LAVEUSE ........................................................ 9
UTILISATION DE LA LAVEUSE ................................................. 10
ENTRETIEN DE LA LAVEUSE .................................................... 12
DEPANNAGE ............................................................................... 13
GARANTIE ................................................................................... 16
Assistance
If you need assistance or service, first see the "Troubleshooting" section. Additional help is available by calling our Customer experience Center at 1-800-253-1301 from anywhere in the
U.S.A., or write:
Crosley Corporation
c/o Service Dept.
675 N. Main St.
Winston-Salem, NC 27102-2111
information may also be obtained by visiting our website at www.crosley.com.
In Canada, for assistance, installation or service call: 1-800-807-6777, or write:
Crosley Corporation
c/o Service Dept.
675 N. Main St.
Winston-Salem, NC 27102-2111
Enhance your washer with these premium accessories. For more high-quality items or to order, call 1-800-901-2042, or visit us at www.appHanceaccessories.com. In Canada, call
1-800-807-6777 or visit us at www.whirlpoolparts.ca.
Part Number Accessory Part Number
8212656RP 10 ft (3.0 m) Black EPDM (2pack) 8212641RP 8212638RP 6 ft (1.8 m) Nylon braided space-saving fill hose, 8212546RP
90° elbow, hypro-blue steel couplings. (2-pack)
8212487RP 5 ft (1.5 m) Nylon braided fill hose. (2-pack) 8212526 Washer drip tray, fits under all
or Service
Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service.
Write down the following information about your appliance to help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial number. You can
find this information on the model and serial number label, located under the washer lid.
Dealer name
Serial number
Address
Phone number
Model number
Purchase date
Accessory 5 ft (1.5 m) Black EPDM (2 pack) 4 ft (1.2 m) Black EPDM (2 pack)
8212637RP 6 ft (1.8 m) Black EPDM, space saving 90° 31682 All purpose appliance cleaner
elbow, hypro-blue steel couplings. (2-pack)
8212545RP 5 ft (1.5 m) Red and Blue EPDM. (2-pack) 1903WH Laundry supply storage cart
This washer does not include inlet water hoses.
W10200883A
WASHERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages inthis manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[]
Read all instructions before using the washer.
[]
Do not wash articles that have been previouslycleaned in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive [] substances as they give off vapors that could ignite or
explode. []
[]
Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or []
explode.
[]
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
SAVE THESE INSTRUCTIONS
Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
Do not reach into the washer if the drum, tub or agitator is
moving.
Do not install or store the washer where it will be exposed to the weather.
[]
Do not tamper with controls.
[]
Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and have the skills to carry out.
[] See "Electrical Requirements" for grounding instructions.
2
WASHERUSE
For these suggested full-sized loads, set the LOAD SIZE selector to the highest load size setting.
SUPER CAPACITY and SUPER CAPACITY PLUS WASHERS
Heavy Work Clothes Mixed Load Towels Delicates 3 pair pants 3 double sheets 10 bath towels 3 camisoles
3 shirts 4 pillowcases 10 hand towels 1 quilted robe 4 pair jeans 8 T-shirts 14 washcloths 4 slips 1 coverall 6 pair shorts 1 bath mat 4 panties
1 overall 2 shirts 2 bras
2 blouses 2 nighties 8 handkerchiefs 1 baby's dress
EXTRA LARGE CAPACITY WASHERS
Heavy Work Clothes Mixed Load Towels Delicates 2 pair pants 2 double sheets or 8 bath towels 3 camisoles
3 shirts 1 king size sheet(s) 8 hand towels 4 slips 3 pair jeans 4 pillowcases 10 washcloths 4 panties
1 coverall 6 T-shirts 1 bath mat 2 bras
6 pair shorts 2 nighties 2 shirts 2 blouses
6 handkerchiefs
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil. Do not dry anything that has ever had any type of oil on
it (including cooking oils}. Doing so can result in death, explosion, or fire.
1.
Measure detergent and pour it into the washer. If desired, add powdered or liquid color safe bleach. Drop a sorted load of clothes loosely into your washer.
[] Load evenly to maintain washer balance. Mix large and
small items. Items should move easily through the wash water. Overloading can cause poor cleaning.
2.
(OPTIONAL) Add liquid chlorine bleach. NOTE: Follow the manufacturer's directions for proper use.
Undiluted bleach will damage any fabric it touches. The damage appears as rips, holes, tears, or color loss and may not show up until several washings later. To avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip, or run down into the washer basket. Always measure liquid chlorine bleach. Do not guess. Do not use more than the
manufacturer's recommended amount for afull load. Use less with a smaller load size.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter. Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Style 1: With chlorine bleach dispenser (on some models)
Use only liquid chlorine bleach in this dispenser. Pour measured liquid chlorine bleach into the liquid chlorine
bleach dispenser. Bleach is immediately fed into washer and is diluted automatically during the wash part of the cycle.
Style 2: Without chlorine bleach dispenser (on some models) [] Let the washer fill and begin agitating the load.
[]
Add bleach 5 minutes into the wash cycle for best cleaning and so that bleach can be removed in the rinse cycle. Pour bleach around the agitator, not directly onto
the load.
3=
(OPTIONAL) Add liquid fabric softener. NOTE: Do not spill or drip any fabric softener onto the
clothes. Undiluted fabric softener can stain fabrics. Always dilute fabric softener with warm water. Too much fabric
softener can make some items (diapers and towels) nonabsorbent. If this happens, do not use it every load, or
use less of it in each load. Style 1: With liquid fabric softener dispenser (on some
models)
[]
Use only liquid fabric softener in this dispenser. Pour measured liquid fabric softener into the dispenser. Softener is added automatically during the rinse portion of the cycle. Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the crossbar in the dispenser opening.
Style 2: Without liquid fabric softener dispenser (on some models)
[] In the final rinse ONLY, add fabric softener that has been
diluted with 250 mL warm water.
4=
Close the washer lid. Washer will not agitate or spin with the lid open.
5. Turn the LOAD SiZE or WATER LEVEL selector to the correct setting for your wash load and the type of fabric being
washed. You may change the load size or water level selection after the washer has started filling by turning the selector to a different setting.
6. Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest wash water safe for fabric. Follow garment label instructions.
NOTE: In wash water temperatures colder than 60°F (15.6°C) detergents do not dissolve well. Soils can be difficult to
remove. Some fabrics can retain wear wrinkles and have increased pilling (the formation of small lint-like balls on the
surface of garments).
7. (OPTIONAL) EXTRA RINSE selector (on some models). For an additional rinse and spin at the end of a wash cycle, set the EXTRA RINSE selector to ON. On some models, the EXTRA RINSE feature is part of the cycle.
8. (OPTIONAL) Some models have an END OF CYCLE SIGNAL selector. Set this selector to ON if you want your washer to alert you when the wash cycle is complete.
9. Push in the Cycle Control knob and turn it clockwise to the wash cycle you want. Reduce the wash time when using a small load size setting. Pull out the Cycle Control knob to
start the washer.
To stop or restart your washer: [] To stop the washer at any time, push in the Cycle
Control knob.
[] To restart the washer, close the lid (if open) and pull out
the Cycle Control knob.
WASHERCARE
Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach from the outside of your washer.
Clean your washer interior by mixing 1 cup (250 mL) of chlorine bleach and 2 cups (500 mL) of detergent. Pour this mixture into
your washer and run it through a complete cycle using hot water. Repeat this process if necessary.
Remove any hard water deposits using only cleaners labeled as washer safe.
Cleaning the liquid fabric softener dispenser (on some models):
1. Remove dispenser by grasping top with both hands and squeezing, while pushing upward with thumbs.
2. Rinse dispenser under warm water, then replace it.
NOTE: Some models are equipped with a liquid fabric softener dispenser. To avoid damage to the washer or clothing, do not
wash clothes with the liquid fabric softener dispenser removed or add detergent or bleach to this dispenser; it is for liquid fabric
softener only.
This washer does not include water inlet hoses. Whirlpool
Corporation recommends use of factory specified parts. A list of factory specified hoses available for separate purchase are listed
on the first page of this user instructions. These hoses are manufactured and tested to meet Whirlpool Corporation's
specifications.
Replace water inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace water inlet hoses if bulges, kinks, cuts, wear, or leaks are found.
When replacing your water inlet hoses, mark the date of replacement on the label with a permanent marker.
Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather, winterize it.
Winterizing your washer
1. Shut off both water faucets. Disconnect and drain water inlet hoses. Pour 1 qt (1 L) of R.V.-type antifreeze into the basket.
2. Run washer on a drain and spin setting for about 30 seconds to mix the antifreeze and remaining water.
3. Unplug washer or disconnect power.
4
To use washer again
1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in washer or reconnect power.
TROUBLESHOOTING
3. Run the washer through a complete cycle with 1 cup (250 mL) of detergent to clean out antifreeze.
Storage, non-use, or vacation care
Operate your washer only when you are at home. if you will be on vacation or not using your washer for an extended period of time, you should:
1. Unplug washer or disconnect power.
First try the solutions suggested here and possibly avoid the cost of a service call...
Noisy Basket crooked
[]
Is the load balanced and the washer level? The wash load [] should be balanced and not overloaded. The washer must be
level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed). See the []
installation instructions.
[]
Did you completely remove the yellow shipping strap with shipping pins? See the installation instructions.
[] Are the gears engaging after the drain and before spin, or
is the upper part of agitator clicking during wash? These are normal washer noises.
Leaking
[] Checkthe following:
Are the fill hoses tight? Are the fill hose washers properly seated?
is the drain hose clamp properly installed? See the installation instructions.
[]
Is the sink or drain clogged? Sink and standpipe must be able to handle 17 gal. (64 L) of water per minute.
[]
is water deflecting off the tub ring or the load? Center the tub before starting the washer. The wash load should be balanced and not overloaded. The fill or spray rinses can
deflect off the load. The washer must be level. The front feet should be properly installed and the nuts tightened. Reset the
rear leveling legs (if needed). See the installation instructions.
[] Check household plumbing for leaks.
Was the washer basket pulled forward during loading? Push the basket to the center before starting wash.
is the load balanced and the washer level? The wash load should be balanced and not overloaded. The washer must be
level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed). See the
installation instructions.
[] The washer basket moves while washing. This is normal.
Agitator operation
[] The top of the agitator is loose, or moves in only one
direction. This is normal.
Dispensers clogged or bleach leaking
[] Did you follow the manufacturer's directions when adding
detergent and fabric softener to the dispensers (on some models)? Measure detergent and fabric softener. Slowly pour into the dispensers. Wipe up all spills. Dilute fabric softener in the fabric softener dispenser.
[] Did you put powdered or color-safe bleach into the liquid
chlorine bleach dispenser (on some models)? Add powdered or liquid color-safe bleach directly to the basket. Do not use the chlorine bleach dispenser for color-safe
bleach.
Loading...
+ 11 hidden pages