INSTALLA]]ONINSTRUC]]ONS
Gatherthe requiredtoolsand partsbe|ore starting installation,
Readand followthe InstTuctlonsprovidedwithany toolslisted
here.
Tools Ele_le_l
m Flat-blade and Phillips [] Tapemeasure
screwdrivers
[] Drillend_/=e"orsrnallerbit
[] Level
Through-the-Wall Installation:
In addition to the toolslistedabove, the [ollowingtoolsare
neededIor through-the-wallinstallation.
[] Saw [] 1"(2,5cm) orthicker
[] Wood preservative
lumber
[] Caulk [] #10x 1" wood screws (7)
Parts Supplied (on sow==models)
Checkthat all parts ereIncluded Inpartspackage.
IMPORTANT:Observeallgoverningcodesand ordinances.
Checkthe locationwhereaircondltJonerwlllbe Installed.Proper
Installation Isyour responsibility.Makesureyou haveeverything
necessarylor correctinstallation.
The locationshouldprovide:
[] GroundedelectzicalouLietwiLhin4 ft(122 cm)of wherethe
powercordexits the airconditioner.
NOTE: Donot usean extensioncord.
[] Freernovementofairinroom tobe cooled.
[] A largeenoughopeningfor the air conditioner.
[] Adequatewallsupportlorweightol airconditioner.Air
condil_onerweighsbetween94 and 103 Ibs(43to 47 kg),
NOTE: Cabinetlouversmustnot beobstructed. Air mustbeable
topass freely_reugh _e cabinetlouvers.
A
H
C D E F
A. Foam window sash seal
B. [Mndow /oei_ brackets {2)
C. #TO x _" pen-head Phillips
SCreWS(6)
D. #lOx _ pen-head
Phillips screws (3)
E.110 x _" round-head screws (6)
F. #TO x _h" pan-head Phillips
SCreWS (3)
G. Topchannel
H.Sidecurtains(2)
LFoamseal
NOTE: Installationpartsare suppliedfor double-hungwindows
upto 40' (101.6 crn)wide.A specialWideWindowKiLlsavailable
fromyourdealeror servicecenter.See "Accessories."
A. Cabinet louvers
P/N 66129901167 1
--A--T--
B
! I
A.27" (68.6cm) minimum
B.161/4" (41.3 cm)minimum
[] Height: 16" (40.6cm) plustwice thickness o|wood used to
buildframe.
[] Depth: 21/2" (6.4 cm) minimum to 6¼"(15.9cm) maximum.
A. 16"(40.6 cm)
B. 22Sl8"(57.5 cm)
C
C, Wood thickness
I
D. 2/z" (6.4) minimum to
614"(15.9cm) maximum.
2
INSTALLATION INSTRUCTIONS
E_mlw We,|_t
[] Removeand disposeolJmc_clepackaging ma1_rlals,
Remove _pe amdglue residue f_m surfaces before _umlng
en the air cendiUoner Rob a areal! aroeunto[ liquiddishsoap
overtheadhesive withyearfinger_,Wipewi_hw_ wa_r
and dry,
[] Do nozuse sharp Ins_umenL% rubbing alcal_ol, flammable
fluids, or abrasive cleaners _ remove _pe or glue, These
products can damage the sur_a©eel _oureirconditJonar_
[] HandlethealrcondRionargen_],
I. Removethe air coedlBonerlr_m_e car_n and placei_o_
€_rdboa_d,
2, Remove sl_lppl_g screws lro_n bombsides o! the ceblmeT.
...... iii ¸
Remove_e windowlock bracketandscrewf_omtheair
condltioner and set aside,Io. some modeIs)
A _ e
B. _nd_w _¢k b_c_t
._ Remove_e groundscrewandgm_ed wire_romthe fmnf.
of the _ir conditionerbese,$a_athe groundscrew,
N
3_
_emo_e fron_ panel by removing 2 philiip_ screws o_ boLh
bot_m teft mjht s_es oHmM.
3A: Remo_e [_ur screw_ a! con_! panelfrom ]r_nt pens].
e,er_eeescrew
Pullon the handles_ slide the al_condIPJonerou_el _Jhe
6_
cabinet Piecethe elf tend _ner en co.beard,
3
NOTES:
[] Handle the air conditioner gently.
[] Be sure your air conditioner cabinet does notlalloutol the
opening during installation or removal.
The place where the power cord exits the air conditioner
should be no more than 4 It(122 cm) from a grounded
3 prong outlet.
[] Do not block the louvers on the front panel.
[] Do not block the louvers on the outside oi the air conditioner.
Attach Top Channel
NOTE: Attachthe top channeland sidecurtains to the air
conditionercabinetbefore placingthe cabinetinthe window.
1. Locateprovidedbagol screws.
2. Place the top channelontop ol the air conditionercabinet,
liningupthe 3 holesinthe top channelwiththe 3 holesontop
ol the airconditionercabinet.
3. Using3 - #10 x _/s"pan-headPhillips thread-cutting
screws,attach the top channelto the airconditionercabinet.
_ _ A
,_ _ B
Bottom view
A
B
A. Curtain housing
B. Curtain bottom channel on air conditioner
3,
Extend right-hand curtain outward so you may insert the
first screw through the middle hole of the curtain. Using
#10 x V_"pan-head Phillips screw, screw the curtain to the
middle hole in the air conditioner cabinet.
NOTE: This screw is required to correctly attach the curtain
(top to bottom) to the air conditioner cabinet.
A, Top channel
B, #10 x _" pan-head Phillips thread-cutting screws
Attach Side Curtains
1. Locate provided bag of screws.
2. insert the top and then the bottom ol the right-hand curtain
housing in the top and bottom curtain channels on the air
conditioner.
Top view
A B
A. Curtain housing
B. Curtain top channel on air conditioner
4.
While the right-hand curtain is still extended, insert #10 x V,"
pan-head Phillips screws into the top and bottom slots of
curtain. Screw the curtain to the top and bottom holes in the
air conditioner cabineL
5. Slide the curtain housing into the curtain guides as faras it
will go.
6. Repeat the above steps lor the lelt-hand curtain.
Attach foam adhesive seal
Attach foam adhesive seal along the bottom of the curtain
bottom channel.
A
B
A. Curtain housing
B. Foam adhesive seal
4
Install Cabinet into Window
Attach Side Curtains to Window Frame
[] Handlethe air conditionergently.
[] Besureyour airconditionercabinetdoesnotfalloutofthe
openingduringinstallationor removal.
[] The placewherethepowercordexitsthe airconditioner
shouldbe no morethan 4 ft (122 cm)from a grounded
3 prongoutlet.
[] Do notblockthe louversonthe frontpanel.
[] Do notblockthe louversonthe outsideof the air conditioner.
9=
Centaremptycabinetinwindow.Checkthat lowerrailofair
conditionercabinetis behindandagainstback sideof
windowsill.Maintaina firmholdon the air conditioner
cabinet.Lower windowsashto holdthe cabinetinplace.
2.
Measurethe distancebetweenthe right-handside of the
cabinetandthe insideof thewindowchannel.
3.
Repeatfor the leftside.Adjustthe cabinetuntilthedistance
on eachsideisthe same.
Jl
J A
I
• =
B
i
9. Pullthe left-hand curtainout untilitfits intothe window
channel.Use a 3/=,,drillbit to drilla starter holethroughthe
holeinthe curtainhousingand into the lower windowsash.
Frant View
Top View
A. Window channel
B. Left-hand curtain
C. #10 x ¾" round-head screw
!
A. Window sash
B. Empty cabinet
C. Window channel
4.
Use a Zh6" drill bitto drill 3 starter holes 3/8"deep through the
3 holes in the cabinetand into the windowsill.
5.
Attachcabinetto windowsillwith3 - #10 x 1,_,,pan-head
Phillips screws.
A. #10 x ½" pan-head Phillips screws
B. Windowsill
6.
Check that air conditioner cabinet istilted to the outside so
that water will run to the outside.
J
A
2=
Insert one of the #10 x 3/4"round-head screws through the
threaded hole in the top of the curtain.
A
B
A. #10 x ¾" round-head screw
B. Slotted hole in the bottom of the curtain
3. Repeatforthe right-hand curtain.
Attach Support Brackets
Attachthe supportbracketto the cabinet by aligning the
holes inthe bracket with the holes inthe cabinet.
5
Complete Installation
1. Inser_seal behind the top of the lower window sash and
againstthe glassof the upperwindow.
2. Place onewindow-lockbracketon top of Iowerwindow
and against upperwindowsash on eachside ol the window.
3. Usea 3/32"drillbitto drilla starter holesthroughthe holesin
each bracketintothe windowsash.
4. Attach both the window-lock brackets to the window sash
with#10 x 3A"round-headscrewsto securewindowin place.
C
A
A. Window lock brackets
B. Upper window glass
C, Foam window sash seal
NOTES:
[] Handle air conditionergently.
[] Besure yourairconditionercabinetdoes notfall outofthe
openingduringinstallationor removal.
[] Theplacewherethe powercord exitsthe air conditioner
should be no morethan 4 ft(122 cm)froma grounded
3 prong outlet
[] Do not blockthe louverson the [rent panel.
[] Do notblock the louverson the outside of the airconditioner.
[] It isthe customer'sresponsibility and obligationto have this
productinstalledbya qualifiedtechnician familiarwith
through-the-wall roomairconditionerinstallations.
Option ImWood, metal or plastic molding
Whenusinga wood,metal or plasticmolding,the woodIrame
shouldlineupwiththe insidewailas shown.
ABC
: o
''0
A. Molding
B.Inside wall
C. Wood frame
D. Louvers
Option 2mPlastered wall with no molding
Ifthe plastered wailisto be Ilush withthe cabinetand no molding
isused,the woodIrame must be set 1/2" (13mm) intothe inside
wall.
AB C
D
A. Plastered waft Wood frame
B. Inside wall D. Louvers
Instail Wood Ftame
1.
Construct the wood frame. See "Location Requirements" for
dimensions.
2.
Measure the outside width and height of Irame to
determine wail opening dimensions.
3.
Cut the opening through the wall. Remove and save insulation.
NOTES:
[] Dimension for depth depends on wall thickness and
type of molding.
[] Do notblock louvers in air conditioner cabinet
6
m Use 1" (2.5 cm) or thicker lumber lot wood |reme.
I' A -,I
A, Outside width
B. Outside height
C, Depth
4, Applythewood preservativeto the outsideexposedsurface.
5. Insertthe frameinthe wallopening.Squareand levellrame.
6. Attach|reme securelyto the wall.
install Cabinet _ _od Frarne
1. Removetop channeland bothsidechannelsusinga 1/4 nut
driveror socketwrench.Discardtop channeland both side
channels.
!
21
Insertcabinetint_ the[reinedwallopening.Thetop ofthe
cabinetshould extend z/4(19.1 ram) intothe room.if there is
trim,the cabinetshouldextend 3/4(19.1 ram) past the trim.
B
A. 3/4 (19.1 rnm)exEending in_ room
B. Trim
3.
Useelevelto checkthatcabinetislevelsidet_ side.
A. Level
4.
CheckthatairconditJonercabinetistilted to theoutsideso
thatwater will runto the outside.Thecabinet shouldslope
at least hall-a-bubble towards the rear.
5.
ReusetheInsulationto sealopeningbetweencablnetand
frame.
6.
Useexistingholesinsidesand _opof cabinetand 7 -#10 x
1"woodscrews(notprovided) to a_ch cabinettoframe.
NOTE. Do notove_ghLenscrewsorthe cabinet willdistort
and providea poorairsealbetweencabinetandair conditioner.
7=
Caulkall outsidewallopeningsaround cabinet.
A _i_ ¸_ _ _w_
NOTE: Handle the air conditioner gently.
1. Make sure the free end of the ground wire Is outside of the
cabinet.
_emlw Weight Hazard
Ueo two or more I_oplo to move and inedall
air conditioner.
Failure to do eo can reeult In back or other Injury.
2. Insert air conditioner Into cabinet
A
A. Make sure the free end of the ground wire Is outside of the cabinet
i El_l_l Sth_k _ |
Co.nwt grmm gmu_ _m to gmu.d s=_w.
FMllura W do sa a_ _ult inda_ or al_'.tr_l a_k
2, Connectgroengroundwireto csbineLbesewi_ grounds¢rew,
Posi_ongroundwire poinUngstraightup, Put=excessground
wire between¢oilaad =ircondiUoner cabineL
A
A. Gxeee9mead _
B, Gmued serew
NOTE:Forl;h_,gh,_e.w=!] in:_t=lia_ns,il needed,ins=li
molding aroundthe roomside or cabinet.
7, P!ugInto_ grounded3p_n9 outer
8, Pres_RESETonthe powsrsepply cord,
8
Loading...