Crosley C42FHDIB Instruction Manual

Proper use guarantees
product life.
Before using the product, be advised that you read this owner’s manual well and try to operate it.
INSTRUCTION MANUAL
LCD TELEVISION
1
2
Caution
Safety Information
3
3
4
5
Unit and Accessory
Product Feature
Getting Started-Front View
Getting Started-Rear View
6-7 Remote Control Key Functions
8- 10
10
10-11
11-12
13-16
16
17
18
Baisc operation
Picture menu options
Audio menu options
Setup menu options
Feature menu options
Feature menu options in VGA
Feature menu options in YPbPr
Parental Control
19
20
Simple Troubleshooting
Technical Specification
Caution
Remote
control
Menu
operation
Troubleshooting
Specification
TV
information
Safety Information
2
Unit and Accessory and Product Feature
- Input: YPbPr1(component1), YPbPr2(component2), VGA, HDMI1, HDMI2, HDMI3, AV, S-Video, RF
- Audio input: Audio R/L, PC Audio, YPbPr Audio R/L
- Support TV mode: NTSC/ATSC/QAM
- Auto-shutting down
- Program exchange and edit
- Speaker output 2 x 10W
- Power(AC 100-240V 50/60Hz)
AAA
3
Getting Started
Getting Started
Indicator on(Red) Standby mode Indicator on(Green) Power on mode
CH VOL
Led indicator
Remote control window(keep clear)
CH+
CH-
VOL+
VOL-
4
caution
Caution
This unit complies with FCC directive.
3124140
1
Getting Started
1. AC POWER IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the Power Cable.
2. HDMI3: Connect it to the HDMI of DVD or other equipment.
3. HDMI2: Connect it to the HDMI of DVD or other equipment.
4. HDMI1: Connect it to the HDMI of DVD or other equipment.
5. PC AUDIO IN: Connect it to the audio output terminal of PC.
6. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC.
7. YPbPr 1: (component1): Connect them to the video output terminal of DVD.(used in HDTV1 mode). . L/R in 1: Connect them to the audio output terminal of DVD(with YPbPr 1).
8. YPbPr 2: Connect them to the video output terminal of DVD.(used in HDTV2 mode). L/R in 2: Connect them to the audio output terminal of DVD(with YPbPr 2).
9. VIDEO/S-VIDEO L/R in: Connect them to audio output terminal of DVD(with VIDEO/S-VIDEO).
10. VIDEO: Connect it to video output terminal of DVD.
11. S-VIDEO: Connect it to S-Video output terminal of DVD.
13. RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
Y Pb Pr L in R in 1
Y Pb Pr L in R in 2
VIDEOL in
R in
AC POWER IN
PC
AUDIO
IN
VGA
HDMI2 HDMI1
FROEDIV-S
89101211 1376543
HDMI3
21
COAX
out
12. Coax out : Digital coaxial output.
5
Switch on LCD TV when at standby mode or vice versa.
Show the current time.
Press to mute the sound. Press again or press VOL+ to unmute.
POWER
MUTE
CLOCK
TV AV S-VIDEO YPBPR1 YPBPR2 VGA HDMI1 HDMI2 HDMI3
TV/AV
P-MODE
Press to cycle through the input source in following:
DISPLAY
Press to display the source and channel’s information.
EXIT
Clears all on-screen displays and returns to TV viewing from any menu.
MENU
Brings up the main menu to the screen.
Return to the previous channel viewed.
VOL+/-
CH+/-
OK
ZOOM
Adjust picture size.
Allows you to navigate the on-screen menus and adjust the system setting to your preference.
The OK key is equal to “Enter” on screen menus.
Press to scan through channels. To scan quickly channels, press and hold down either +/- button.
Press to increase / decrease the sound level.
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you are watching TV. Then press “OK” key to confirm.
Press this button to enter a program number for multiple program channel such as 2-1,etc.
FREEZE
Catch the current picture.
TV/AV P-MODE S-MODE SLEEP
CLOCK
VOL+
VOL-
EXIT
MUTE
DISPLAY ZOOM FREEZE
MTS CC EPG FAV
AV/SV
YPbPr
HDMI VGA
MENU
OK
CH+
CH-
123
456
789
0 -/--
Select the picture mode.
S-MODE
Select the sound mode.
SLEEP
Time shutting down
FAV- FAV+ C.T. NULL
6
TV/AV P-MODE S-MODE SLEEP
CLOCK
VOL+
VOL-
EXIT
MUTE
DISPLAY ZOOM FREEZE
MTS CC EPG FAV
AV/SV
YPbPr
HDMI VGA
MENU
OK
CH+
CH-
123
456
789
0 -/--
FAV- FAV+ C.T. NULL
Press to select the audio channels.
MTS
CC
Press to display the closed caption.
Press to add or remove favorite channel.
Switch to AV/S-Video source.
Switch to YPbPr sources.
Switch to HDMI sources.
Switch to VGA sources.
Press to toggle up the program which you favorite.
Press to enter the EPG menu directly.
FAV
AV/SV
YPbPr
HDMI
VGA
FAV-
Press to toggle down the program which you favorite.
FAV+
NULL
C.T.
Press to select the Color Temperature from Cool/Normal/Warm.
EPG
7
NOTE: If this is the first time you run the LCD TV, the Initial Setup Menu will appear in the picture, and
the items of this menu also exist in other menus, so you are able to change the values after you
set them up.
Menu Language
Press
/ button to select this item, then press OK / button to select the OSD language.
Auto Ch Search
Press
/ button to select this item, then press OK / utton to enter the Auto Channel Search Program.
Tuning Band
select Tuning Band mode. (Available tuning band mode: Air, Cab le STD, Cab le HRC, Cab le IRC, Cable A ut o.)
Press OK / to
POWER
/-
Tuning Band
Initial Setup Menu
Menu Language
Auto Ch Search
English
Air
ToMove ToSelect To Exit
OK
Exit
8
MENU
, and press OK to confirm.
OK Exit
OK Exit
User
AC-3
OK Exit
Setup
Signal Level Auto channel Search Add On Channel Search
Manual Channel Set
Reset
OK Exit
TV/AV
9
MENU
MENU
Once you adjusted to your preference, press for exit
OK
OK
Source List
TV AV
S-Video YPbPr-1 YPbPr-2
VGA HDMI1 HDMI2 HDMI3
OK Exit
OK Exit
Press button to select and press Enter / to enter, then press to adjust the brightness of the picture.
Press button to select and press Enter / to enter, then press to adjust the sharpness level of the picture.
Press button to select and press Enter / to enter, then press to adjust the color saturation.
Press button to select and press Enter / to enter, then press to adjust the tint of picture. (In NTSC system)
Press button to select and press Enter / to enter, then press to adjust the contrast of the picture.
10
/
/
/
/
/
/
/
OK Exit
User
AC-3
OK Exit
Setup
Signal Level Auto channel Search Add On Channel Search
Manual Channel Set
Reset
Signal Level
OK
OK
OK
OK
OK
OK
sound
Audio
(COAX and OPTICAL output are not under control of this function.)
/
Press button to select and press Enter / to enter, then press to adjust the bass value.
/
/
Press button to select and press Enter / to enter, then press to adjust the Treble value.
/
/
Press button to select and press Enter / to enter, then press to adjust the sound balance.
/
11
Spanish.
Exit
OK
OK
OK
OK
Auto Channel Search - Air
12
the number of minutes to set your TV sleeps automatically.
Advanced Video Menu
Noise Reduction
Medium
Normal
On
Color Temperature
3D Y/C
Adaptive Contrast
Gradient Enable
Blue Screen
Audio Only
On
On
On
tixEoTevoMoT
Exit
To Select
120Hz Mode
OK
OK
OK
OK
OK
OK
OK
press OK / to
OK Exit
On
13
Press button to set the video on or off. Press OK video will hide, hold down power 3 sec. to restore.
/
/
/
/
/
/
/
Audio only
120Hz Mode
Press OK video will hide, hold down power 3 sec. to restore.
OK CANCEL
OK
OK
OK
OK
OK
OK
OK
Press button to set the 120Hz mode from ON/OFF/DEMO.
/
OK
OK
OK
Off
Off
OK
14
AUTO CC SAMPLE
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Canadian Rating Menu.
15
Exit
OK
OK
OK
OK Exit
Press button to select and press Enter / to enter, then press to adjust the horizontal position of the picture..
Press button to select and press Enter / to enter, then press to adjust the vertical position of the picture.
Press button to select and press Enter / to enter, then press to adjust the clock of the picture.
Press button to select and press Enter / to enter, then press to adjust the phase of the picture.
16
TV/AV
Exit
OK
OK
YPbPr Set
YPbPr
YPbPr Set
YPbPr Setting Menu.
YPbPr
YPbPr
OK Exit
YPbPr Set
i
Press button to select and press Enter / to enter, then press to adjust the horizontal position of the picture.
Press button to select and press Enter / to enter, then press to adjust the vertical position of the picture.
Press button to select and press Enter / to enter, then press to adjust the phase of the picture.
17
Menu Operation
: 0,0,0,0.
(page 14)
If used, this optional feature can “block” undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV. Parental control allows the user the capability of defining which program rating they consider accept-able, to the younger or more sensitive viewer. It can be preset and turned either on or off by the user who specifies the secret 4-number code, the password. The number of hours blocked are specified. General audience and children viewer blocks should both be programs into the TV’s memory. Viewer ratings are specified for both TV and the motion picture industry; both rating systems should be used, for complete coverage.
The ratings are based on the ages of children.
To insure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below. And choose ratings from the TV Parental Guidelines Rating System below, using the Age Block option for General Audiences, and for Children. In addition to those, you may wish to add additional restrictions from the Content Block menu. See the Parental Control menu, and submenus example below.
Overview
Determine which rating you consider acceptable to the viewer. (For example, if you choose TV-PG, all more restrictive ratings will be automatically blocked; the viewer will not be able to see: TV-PG, TV-14, or TV-MA rated programming.)
Do you want to block the auxiliary video source entirely? (Blocks the signal sent by the equipment, such as a VCR, connected to the TV Audio/Video input jacks) Or leave unblocked, then choose allowable ratings. Block program “Content” based on individual parameters such as: Strong Dialog,
Bad Language, Sex Scenes, Violence Scenes, or Fantasy Violence Scenes; in the Content Blk option. Select a secret password; in the Set Password option. Use the number keys on the remote. Don’t forget the password, it is the only way you can access the Parental Control menu and change rating selections, or turn Parental Control off.
Do you want Parental Control to be active all the time? If not, you can turn it on or off with the Lock On/Off option.
* You can set different Parental Control viewing restrictions for general audiences and for children both can be active at the same time.
* Simply specifying one content block such as Sex Scenes, will not automatically block another content in the programs from appearing.
* Even if you choose
to leave the Aux inputs unblocked, the ratings you specify will automatically restrict the programming that appears
from the video sources.
* You can not disable Parental Control by disconnecting the TV from power. Block hours will automatically reset to the original block time setting
specified if power is disconnected.
Things to Consider before Setting Up Parental Control
MOTION PICTURE ASSOCIATION OF USA (MPAA) RATING SYSTEM
ssecneiduAlareneG reweivtsomotevisneffotontnetnoCG
PG
Parental Guidance
Suggested
Content is such that parents may not want their children to
view the program.
PG-13
Parental Strongly
Cautioned
Program is inappropriate for preteens, with a greater degree
of offensive material Suggested than a PG rated program
R
Restricted viewing
Not for children under age 17.
Strong elements of sex and/or violence.
NC-17
No Children under
age 17
Not for children under age 17 under any circumstances.
Strong sexual content.
X
Hard Core Films
Same as NC-17 rating.
No Rating
No Rating
MPAA Not Rated
Grade
Meaning
TV PARENTAL GUIDELINE RATING SYSTEM
snerdlihCgnuoY reweivtsomotevisneffotontnetnoCY-VT
TV-Y7
Children 7 and over
Considered suitable for children over 7, may contain
Fantasy Violence Scenes.
TV-G
Parental Audience
Considered suitable for all audiences; children
may watch unattended.
TV-PG
Parental Guidance
Suggested Unsuitable for younger children, may contain:
Suggestive Dialog, Bad Language, Sex, and Violence Scenes
TV-14
Parents Strongly
Cautioned
Unsuitable for children under 14, may contain: Strong
Dialog, Bad Language, Sex, and Violence Scenes.
TV-MA
Mature Audience
Only
Adults only, may contain: Strong Dialog, Bad Language, Sex, and
Violence Scenes.
Grade
Meaning
Note
The V-Chip will automatically block certain categories that are ‘more restrictive’. If you block TV-Y category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G category, then all the categories in the ‘young adult’ will be blocked(TV-G, TV-PG, TV-14 and TV-MA).
Information
Canadian Rating:
Canadian English is used throughout all of Englishspeaking Canada (E, C, C8+, G, PG, 14+, 18+). Canadian French is used in Quebec (E, G, 8 ans +, 13 ans +, 16 ans +, 18 ans +).
18
Simple Troubleshooting
Simple Troubleshooting
SYMPTOM
DEALING METHOD
Check the power connection. Pull the plug out, wait for 60 seconds, then reconnect the power and run the set
Check the antenna connection. Try other TV channel due to the TV station problem. Modify the brightness or contrast setting.
Increase the volume. Check that if the set is on the mute state or not. Check the voice setting condition. Check the voice mode setting condition.
Check the antenna connection
NO SOUND
NO PICTURE
NO POWER
ABNORMAL COLOR
NO RESPONSE OF THE REMOTE CONTROL
The SCREEN FLASH IN VGA MODE
SOME INTERFERE IN THE VGA MODE
CLEAN THE TV SET
COLOR SPOT
Check the effect of the batteries, if needed, please replace the batteries or clean the remote sensor window. The distance between the set and the remote control should be less than 6 meters.
The parameter is too big. Please use safety mode when restart the PC, and set the parameter of the monitor according to the instruction.
Please modify parameter of the monitor according to the instruction.
Please pull the plug out when clean the LCD screen. Using soft, clean cloth to wipe it off. If need to clean further, please use dry cloth, don’t use naphtha or other thinner liquid.
Performs
This product uses high definition LCD panel, and the panel has its special character, there maybe existed some color spots, so when the user find few color spots it's not a quality problem. The standard for inspecting this panel is the same which is out of the scope to replace the product.
19
Technical Specification
Technical Specification
Display
Screen size
Ratio
Definition
Brightness(cd/m )
Contrast
Color
Channel label
Time set
Video
S-Video
VGA
2 x YPbPr&YCbCr
3 x HDMI
Coax out
42inch
16:9
1920(RGB)x1080
500
1000:1
1.06 Billion
yes
yes
yes
yes
yes
yes
2x10W
AC 100-240V 50/60Hz
280W
TV
Input
Output
2
Support 480i,480p,720p,1080i,1080p
Support 480i,480p,720p,1080i,1080p
TV system DTV-ATSC (VSB, Clear QAM) / TV-NTSC
Speaker output
Power
Power Consumption
BROADCAST SIGNAL SYSTEM
NTSC + ATSC + QAM
20
“GOLDEN WARRANTY”
Crosley Corporation warrants this product to be free from defects in material and workmanship and agrees to repair or replace this product to remedy such defects.
This warranty covers TWO YEAR OVER-THE-COUNTER EXCHANGE from the date of the original purchase.
This warranty applies only to product purchased from an authorized Crosley dealer and used within the boundaries of the U.S.A. and Canada.
This warranty does not apply to product that has been improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged during transportation, or which has been altered or repaired in any way that affects the reliability or detracts from its performance..
How you get warranty service
Warranty service can only be provided by an authorized Crosley service center. For the closest authorized service center to you, please contact your Dealer. In order to receive warranty service you must provide the authorized service center with a copy of proof of purchase, signifying the date of purchase and the name of the Dealer from whom you purchased the product.
Statutory warranties
The purchaser may have rights under existing provincial or federal laws, and where any terms of this warranty are prohibited by such laws, they are deemed null and void, but the remainder of the warranty shall remain in effect.
If you require further assistance, please contact the Crosley dealer or go to:
www.crosley .com to locate your nearest Crosley Distributor.
Crosley Corporation 111 Cloverleaf Drive, Suite 200 Winston-Salem, NC 27103
Service Call Toll Free Number: 1-888-446-4869
P/N : 48586900E110-R1
Loading...