Crompton CTD180 User Manual

USER MANUAL

Time Delay Contact Blocks

CTE / CTD

Disconnect all power before installing, modifying or servicing equipment.
Electric shock will result in death or serious injury.

WARNING

Operating Instructions:

1. Depending upon application, select the type and range of

2. Mount the block on the top of desired rating of contactor/

3. Make the required connections.

4. Rotate the knob(button) of timer block in clockwise

5. Now switch on the circuit and set your stop watch for

6. Rotate button in clockwise direction if timing is required

7. Once the time is set to desired specification, check the

8. Now the timer is ready for proper functioning.

Only skilled & qualified personnel should carry out the following operations and
must adhere to all appropriate national, regional and local standards applicable

time delay contact block i.e. CTE / CTD

control relay by sliding till a click sound of latch is heard
to ensure the proper fixing.

direction to the position which is some what nearer to the
requirement.

accurately setting the position of the timer button.

to be increased and in anti-clockwise direction if required
to be decreased.

repeatability which shall be ±5% of timing set.

1

Specification / Tolerance of Time Delay Contact Block:

Type

On Delay

Off Delay

Reference #

CTE3

CTE30

CTE180

CTD3

CTD30
CTD180

Time range

0.1-3 sec 3-6 sec

0.1-30 sec

10-180 sec

0.1-3 sec 3-6 sec

0.1-30 sec
10-180 sec

Tolerance on max.

Notes:

-Mechanical life : 5 million operations.

-Loss of accuracy up to 0.5 million operations : +15%

-Loss of accuracy due to ambient temperature : 0.25% per °C

position

28-60 sec

180-360 sec

28-60 sec
180-360 sec

Repeat accuracy

±5%

±5%

±5%

±5%

±5%
±5%

Crompton Controls Ltd.

Monckton Road, Wakefield, West Yorkshire WF2 7AL
Phone: [phone] Fax: [phone]
E-mail: [e-mail], www.cromptoncontrols.co.uk

xxxxxx

2