CR Magnetics CR5200 Data Sheet
CR Magnetics, Inc. 3500 Scarlet Oak Blvd. St. Louis MO USA 63122 V: 636-343-8518 F: 636-343-5119
Web: http://www.crmagnetics.com E-mail: sales@crmagnetics.com
Another HUNTINGTON ELECTRIC Company
44
Transducers
C
CR5210 CR5211 CR5220
Single Element - .79” Window
2 to 300 ADC Input Range
2- 0-2 ADC
5 - 0-5 ADC
10 - 0-10 ADC
20 - 0-20 ADC
30 - 0-30 ADC
50 - 0-50 ADC
75 - 0-75 ADC
100 - 0-100 ADC
150 - 0-150 ADC
300 - 0-300 ADC
Ranges available up to and
including 600 ADC
DC Current Transducer
DIN RAIL / PANEL MOUNT, RMS
All single element current transducers are available in split core design.
Simply put an “S” at the end of the prefix
Add suffix for input range
The CR5200 Series, DC Current Transducers are designed to
provide a DC signal which is proportional to a DC sensed
current. These devices are designed for direct current only,
targeting them towards general and daily applications. The
ranges 2 to 10 Amp utilize an advanced Magnetic Modulator
technology and the ranges 20 amps and above utilize Hall
Effect technology.
Applications
Battery chargers and systems
DC motor drives
Power supply management
Mobile applications
Features
Closed loop sensing for accuracy
35mm DIN rail or panel mount
Available with ±5 VDC, ±10 VDC or 4 - 20 mADC outputs
Non-contact DC current sensing
Connection diagram printed on case
Regulatory Agencies
CR5210S CR5211S CR5220S
Single Element - 1.2” Window
20 to 300 ADC Input Range
PART NUMBERS
CR5210(S)
-
Single Element with
±
5 VDC output (split core design)
CR5211(S)
-
Single Element with
±
10 VDC output (split core design)
CR5220(S)
-
Single Element with 4 - 20 mADC output (split core design)
NOTE: DC Split Core Transducers Available in 20 Amps and Higher
NOTE: CR5200 Series is available with 12V Power Supply. Use same application as 24V Power Supply.
Example Part Number: CR5210-300-12.
Transducers
C
CR Magnetics, Inc. 3500 Scarlet Oak Blvd. St. Louis MO USA 63122 V: 636-343-8518 F: 636-343-5119
Web: http://www.crmagnetics.com E-mail: sales@crmagnetics.com
Another HUNTINGTON ELECTRIC Company
45
SPECIFICATIONS
DC Current Transducer
DIN RAIL / PANEL MOUNT, RMS
NOTE: The building installation must have a switch or circuit-breaker that is in close proximity and within easy reach of the operator. The switch or circuit breaker
shall be marked as the disconnecting device for the equipment.
CR5220
4 - 20 mADC Output
CR5210
±5 VDC Output
+
CONNECTION DIAGRAM
-
+
-
Basic Accuracy:...................... 1.0 %
Thermal Drift:.......................... 500 PPM/°C
Operating Temperature:.......... 0°C to +50°C
Response Time: ................... 250 ms. max.,0-90% FS
Insulation Voltage:................... 2500 VDC
Supply Voltage:............................... 24 VDC ±10%
Frequency Range:.......................... DC only
MTBF:............................. Greater than 100 K hours
Output Load:......
±5or ±10
VDC...... 2 K Ω or greater
4-20 mADC........... 0 - 300 Ω
Supply Current:
CR5210:......................Typical 35mA Max 40mA
CR5210S:....................Typical 30mA Max 35mA
CR5220:......................Typical 60mA Max 100mA
CR5220S:....................Typical 40mA Max 50mA
Torque Specs.:................ 3.0 inch lbs. (0.4Nm)
Weight:.............................0.5 lbs.
OUTLINE DRAWING
1 hole: 0.79(20) Dia. for CR5210 & 5220 (shown)
p
(36)
0.14
(3.5)
1
2
3
4
2.874
(73)
2.874
(73)
9
1.06
8
(26.8)
7
6
5
1.22
0.79
(20)
2.99
(76)
0.79
1.22
(31)
3.86
(98)
Split core
DIA.
Split core
S
1
2
3
4
9
8
7
6
5
+
OUTPUT
-
SUPPLY
+
-
0.20
(5.1)
3.268
(83)
1.42
(36)
Loading...