APEX DESK
Assembly Instruction Manual
- Please follow these assembly instructions as it will save you time, make
assembly easier and prevent possible damage to your new unit.
- Correct assembly is your responsibility
-We strongly recommned that the unit is assembled on a soft surface such
as carpet or blanket.
FOR MISSING OR FAULTY PARTS:
PLEASE RECHECK YOUR PACKAGING TO ENSURE THAT PARTS ARE MISSING, THEN CONTACT THE
STORE YOU PURCHASED THE ITEM FROM, PROVIDING THE DETAIL IN 1 - 5 BELOW
1. MODEL NUMBER OF THE UNIT PURCHASED
2. COPY OF YOUR PURCHASE SLIP / INVOICE
3. DESCRIPTION OF THE MISSING PART
4. PART NUMBER OF THE MISSING PART
5. QUANTITY OF THE PARTS MISSING
IMPORTANT: MISSING / DAMGED PARTS WILL NOT BE REPLACED UNLESS THE INFORMATION REQUESTED IS FULLY SUPPLIER.
08th DEC 2014
APEX DESK
UNPACK & IDENTIFY PARTS
1
2
3
4
2
STEP1
STEP2
STEP3
STEP4
CAUTION: We recommend that all contents stored in or on this item of furniture be removed before
moving it. The manufacturer will not be held reliable for damage caused when furniture is moved without
first removing the contents. Do not drag the furniture whilist moving it.
SURFACE CARE INSTRUCTIONS
A lile care and aenon will extend the life and good looks of your furniture. Take care when using
materials which might spill, or be sharp or abrasive, on the surface of your furniture.
Normal Cleaning: For normal cleaning use a so, dry, clean cloth.
Glass Cleaning for Frosted Glass: Do not use glass cleaner or solvent based cleaners on glass that
has a frosng effect on it.
Normal Glass Cleaning: You may use normal glass cleaning products on all other types of glass. Use a
so non-abrasive cloth to remove light dust and finger prints.
Leather, Vinyl & Speaker Cloth Cleaning: Under no circumstances should any abrasive materials be
used on these surfaces, as it will result in irreparable damage.
Do not use solvents, solvent based cleaners, scouring pads, steel wool or scrubbing brushes to clean
this furniture item.
Only use a slightly damp, so, clean cloth on this surface if cleaning is needed. Do not scrub.
CAUTION
As with all furniture, this unit should not be exposed to direct sunlight, extreme temperatures or
moisture, as this can result in irreparable damage. Do not use it in any other way other than how it
was designed to be used.
Note: The sooner a spill or mark is cleaned, the easier it will be removed.
Customer Service
FOR ALL MISSING OR FAULTY PARTS: PLEASE RE-CHECK YOUR PACKAGING TO ENSURE THAT PARTS
ARE MISSING THEN CONTACT THE STORE YOU PURCHASED THE ITEM FROM.
THE STORE WILL NEED THE FOLLOWING INFORMATION…..
- COPY OF YOUR PURCHASE SLIP/RECEIPT
- MODEL NUMBER OF THE UNIT PURCHASED
- DESCRIPTION/PART NUMBER OF THE MISSING OR FAULTY PART
- QUANTITY OF THE PARTS NEEDED
If for whatever reason you cannot contact the store, please contact Tauris direct at
hp://www.rvm.com.au/contact.
Product of:
RVM Australia
11 Tamara Drive, COCKBURN CENTRAL
Perth, Western Australia 6164
PH: 08 9417 9944
WARRANTY POLICY
1. Nothing in this Warranty affects the Consumer’s rights under the Australian Consumer law. The
benefits to the Consumer under this Warranty are in addition to the rights and remedies of the
buyer under any Consumer Guarantees. The Australian Consumer Law requires that we confirm that:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality.
2. Subject to Clause 1, the Seller warrants that CRITERION branded products will be free of
manufacturing defects and will perform to the Seller’s specifications subject to the following clauses.
3. The benefit of this 12 Month Warranty extends only to the owner of the property in which the
Products manufactured or supplied by the Seller are installed and used by the owner for the
duration of the Warranty Period.
4. If within the Warranty Period a manufacturing defect is discovered in the Product, or the Product
fails to perform to the Seller’s specifications as a result of some defect in material or workmanship,
then the Seller will replace or repair the goods under Warranty or refund the purchase price paid by
the consumer (except if the failure is a major failure)
5. The Warranty does not apply to Product that:
a.) Has failed due to excessive wear and tear beyond what is considered to be reasonable.
b.) Has been misused or neglected.
c.) Has been damaged accidently or by acts of God including fire and flooding.
d.) Has been used or operated contrary to operating or maintenance instructions.
e.) Has been damaged in transit from the Sellers store to the buyer, either by the buyer or a third
party authorised to act for the buyer.
f.) Was incorrectly assembled or installed
6. In order to make a claim under the Warranty, the Owner must provide proof of purchase in all
cases.
7. The seller will examine any returned Products and if the Seller determines that there is an
apparent defect through no fault of the Owner, the Seller will:
a.) Make note of the Owner’s contact details including the Owner’s telephone number which the
owner can be contacted during business hours, postal address and e-mail address.
b.) Make note of the defects reported by the Owner.
c.) Take back the defective goods from the owner and determine within a reasonable time through
dialogue with the Seller whether the goods are defective.
Loading...