Crimsco USTC-48-HR User Manual
Crimsco Inc. Correctional Meal Delivery Specialists
USTC-48-HR
USTC-48-HR
Correctional Meal Delivery Carts
These state of the art, dual tray heated and refrigerated carts are the staple of the industry when it
comes to ease of operation in correctional facilities.
Built to last for years of service. They are fully insulated and as heavy duty as they come!
These carts are not just some restaurant style cart
with security features attached. Our carts are
manufactured from the ground up specifically for the
correctional field.
Our reinforced fully welded base and integral
Dual layer fully welded corner post design insures
the elimination of any cabinet torque during transport.
Our rear mounted forced air heating and cooling
system is designed for superior heat and cooling
temping times as well as fantastic hot and cold retention. Our “no hassle” controls make using this cart as
easy as a push of a button
Item # ____________________________
Model USTC-48-HR
Correctional Meal Delivery Cart
Heated & Refrigerated
Standard Features
▼ Rear Mounted Forced Air Heating and cooling
System
▼ Fully insulated
▼ Fully Welded Removable Tray Slides
▼ Lexan Covered Dial Thermometer
▼ Flush recessed door pull
▼ Heavy duty 8” casters
▼ Magnetic door closures
▼ All stainless steel
▼ Fully welded
▼ Integral dual layer fully welded corner posts
▼ Super duty reinforced base
▼ Flush mounted doors
▼ Full perimeter bumper
▼ One year parts and labor warranty
▼ Fully welded 12 gauge hinges
▼ Face mounted “sure seal gasket”
Options
▼ Upgrade casters to semi pneumatic
▼ Beverage retainer Brackets
▼ No Racking (stacked trays)
▼ 208 volt
Form #
7737 N 81st Street▼Milwaukee, WI 53223 USA
414-702-8972▼800-367-8413▼Fax 414-354-2821
41158 (10/09)
Crimsco a Division of ITW FEG
MADE in the USA © 2009 ITW-FEG
Item # ____________________________
Crimsco Inc. Correctional Meal Delivery Specialists
Model USTC-48-HR
Correctional Meal Delivery Cart
Heated & Refrigerated
Model Capacity Width Depth Height Weight Electrical NEMA Casters
USTC-48-HR See tray
configuration
below
Construction: Heliarc welded, fully insulated,
stainless steel double pan construction. Support channels welded at base, integral dual layer fully welded
corner posts (all four corners and center posts).
Bumper: Continuous wrap around aluminum (dovetail) designed bumper complete with (secure fit) nonmarking vinyl insert.
Doors: Double pan design, fully insulated, 12 gauge
hinges, recessed door pulls
Heating system: Rear mounted forced air, with rear
mounted “tunnel” distribution system. Digital thermometers equipped with lexan cover, lighted on/off
switches.
50” 32.250” 67.5”
55” to top
of deck
SPECIFICATIONS
Casters: 8” super duty polyurethane casters mounted to 1/4
inch mounting plates. (2) swivel with brakes (2) rigid.
Casters equipped with mounting plate shall be secured to reinforced base channel with 3/8” carriage bolts.
Racking: Fully welded one piece shelving is removable for
cleaning.
Tray configuration: (48) hot and (48) cold 9” x 12” x 2.75”
or (72) hot and (72) cold 6” x 9” x 2.75”
If opting to stack trays instead of using tray slides, your
capacity becomes:
(60) hot and (60) cold 9” x 12” x 2.75” or
(90) hot and (90) cold 6” x 9” x 2.75”
775lb 120v
540 watt
115v, 8’
5-20P
8”
Note: in line with its policy to continually improve its products, Crimsco Inc. reserves the right to change materials
and specifications without notice.
Crimsco a Division of ITW FEG
7737 N 81st Street▼Milwaukee, WI 53223 USA
414-702-8972▼800-367-8413▼Fax 414-354-2821
Form #
41158 (10/ 09)
MADE in the USA © 2009 ITW-FEG
Loading...