Crimsco USTC-48-HR, IMC-48-1014, IMC-72-1014, IMC-120-912-HA, IMC-120-912-HH Specifications

is

Foodservice equipment

designed for the unique

needs of correctional facilities

Corrections

Precision performance. State-of-the-art design. For over 30
years Crimsco has been recognized by food service managers
across the country for top quality correctional meal delivery
systems that are built to last.

Your environment is tough.

Our standards are even tougher.

When we say, “Crimsco is corrections”, that’s not a
statement we make lightly. For over 30 years, Crimsco
has served the corrections market-getting to know
your needs literally from the inside out.

The result? Products that are as inmate-proof as

possible: heavy-duty stainless steel

construction…unique tamper resistant, mechanically
attached bumpers…double pan reinforced doors…12
gauge welded hinges…a minimal number of moving
parts to minimize breakage and wear…top mounted

heating systems and much, much more. Our
equipment is also designed with the many structural
needs of your facility in mind. Our products can easily

move through “sally ports” and navigate narrow door

openings and bottle necks. Crimsco products are
designed with flexibility in mind. Where you may
have needed a cumbersome two or three door
product you will be able to use a Crimsco one door
product. Most of our products can utilize multiple tray
sizes, giving you more options.

Our top mounted forced air heating system
helps keep foods at HACCP compliant
temperature levels, and also meets your
needs for security and sanitation.

Along with the built-in challenges of your environment

- an inmate population that is both growing and aging,
new facilities construction, adequate staffing and
budget cuts – you also face increasing demands for

HACCP-compliance. Because more facilities are

going to cell block feeding, there’s an even greater

need to monitor temperatures to reduce the
possibility of food-borne illness. Crimsco helps you
stay HACCP-compliant with equipment that when
properly used, works to help maintain proper food
temperature at the point of service.

Durability. Flexibility. Reliability.

That’s a lot to ask of any equipment. But at Crimsco,

we work hard to deliver in each of those areas. After

all, we don’t consider corrections equipment just

something we do. We know your needs so well, it’s

who we are.

Top mounted-away from damage and food spillage

Tunnel distribution system insures even heat flow

Recessed thermostat and thermometer safely

protected behind tamper-proof covers

Simple on/off switch

Count on Crimsco for maximum
security and durability.

Security is our top priority.

Making our equipment as close to inmate-proof as
possible drives the development of every feature of

our carts. It’s not enough to take an existing

product tack on a few bolts and call it secure. Our
equipment is designed primarily for the maximum

security environment. Which is why you’ll find

everything available from Lexan ™ covers for

thermometers, to tamper-proof fasteners, to 12
gauge welded hinges to 12 gauge lockable
transport latches to magnetic door closures to fully
welded shelving that prevent exposed parts getting
banged up or tampered with – all standard on

Crimsco’s carts.

The strength and toughness of Crimsco carts start with
our heavy-duty double pan reinforced base

Crimsco carts are extra strong and avoid cabinet torque
with our unique four corner integral c-channel design

Crimsco carts feature heavy gauge stainless steel
construction

Tray slides are welded in place to removable frames

Fully welded stainless steel tubular handles are standard

12 gauge stainless steel hinges

Durable Construction, Efficient Design, Reliable Performance