Crimsco IMC-BFT, IMC-BFT-HS User Manual
Crimsco Inc. Correctional Meal Delivery Systems
IMC-BFT Series
IMC-BFT Series Meal Delivery
Cabinets
These rugged, built to last delivery carts are fully insulated
and are designed for secure, fast meal
delivery service.
These carts are not just some restaurant style cart with
security features attached. Our carts are
manufactured from the ground up specifically for the
correctional field.
Our reinforced fully welded base and integral
Dual layer fully welded corner post design insures the
elimination of any cabinet torque during transport.
Our top mounted forced air heating system is designed for
superior heat temping times as well as fantastic heat
retention. Our easy to use controls make using this cart
as easy as a push of a button
The bottom line is, your environment is tough! Our
standards are even tougher!
Item #_________________
Model IMC-BFT Series
Holding and Transport Cabinet
For 18” x 26” and 12” x 20” pans
Standard Features
▼ 12 gauge Lockable transport latch
▼ Tamper proof fasteners throughout
▼ Top Mounted Forced Air Heating System
▼ Fully insulated
▼ Fully Welded Removable Tray Slides
▼ Lexan™ Covered Dial Thermometer
▼ Adjustable Thermostat Equipped with Security
Cover
▼ Flush recessed door pull
▼ Heavy duty 5” casters
▼ Magnetic door closure
▼ All stainless steel
▼ Fully welded
▼ Integral dual layer fully welded corner posts
▼ Super duty reinforced base
▼ 270 degree door swing
▼ Full perimeter bumper
▼ One year parts and labor warranty
▼ (3) Fully welded 12 gauge hinges
▼ Face mounted “sure seal gasket”
Options
▼ Ambient configuration
▼ No racking (stacked trays)
Form # 41145 (9/09)
Crimsco a Division of ITW FEG
7737 N 81st Street Milwaukee, WI 53223 USA
414-702-8972 / 800-367-8413 / Fax 414-354-2821
Item #_________________
Crimsco Inc. Correctional Meal Delivery Systems
Model IMC-BFT Series
Model Capacity Width Depth Height Weight Electrical NEMA Casters
IMC-BFT 12 bun
24 (4” bulk)
IMC-BFT-HS 6 bun
12 (4”bulk)
28” 34.5” 72” 525 lbs 120v
1000 watts
28” 34.5” 45” 375 lbs 120v
1000 watts
115v 8’
5-15P
115v 8’
5-15P
Specifications
Construction: Heliarc welded, fully insulated, stainless steel
double pan construction. Support channels welded at base,
integral dual layer fully welded corner posts (all four corners).
Bumper: Continuous wrap around aluminum (dove-tail)
designed bumper complete with (secure fit) non-marking vinyl
insert.
Doors: Double pan design, fully insulated, 270 degree swing,
12 gauge hinges, recessed door pulls
Heating system: Top mounted forced air, with rear
mounted “tunnel” distribution system. Dial thermometer
equipped with lexan™ cover, adjustable thermostat equipped
with security cover, lighted on/off switch.
Casters: 5” super duty polyurethane casters mounted to 1/4 inch
mounting plates. (2) swivel with brakes (2) rigid.
Casters equipped with mounting plate shall be secured to
reinforced base channel with 3/8” carriage bolts.
Security Detail: All fasteners shall be tamper proof, hinges and
transport latches are 12 ga. And fully welded.
Racking: Fully welded one piece shelving is removable for
cleaning.
Tray configuration: (IMC-BFT)= 12 level 4.5” spacing.
(IMC-BFT-HS)= 6 level 4.5” spacing.
5”
5”
Note: in line with its policy to continually improve its products, Crimsco Inc. reserves the right to change materials and specifications without notice
Crimsco a Division of ITW FEG
7737 N 81st Street Milwaukee, WI 53223 USA
414-702-8972 / 800-367-8413 / Fax 414-354-2821
Form # 41145 (9/09)
Loading...