Crimsco Inc. Correctional Meal Delivery Specialists
IMC-120-912 –HA
*
* Energy star rating does not apply to (HH and AA) versions
IMC-912 Series Meal Delivery
Cabinets
These rugged, built to last delivery carts are fully
insulated and are designed for secure, fast meal
delivery service.
These carts are not just some restaurant style cart
with security features attached. Our carts are
manufactured from the ground up specifically for the
correctional field.
Our reinforced fully welded base and integral
Dual layer fully welded corner post design insures
the elimination of any cabinet torque during transport.
Our “high and dry” top mounted forced air heating
system is designed for superior heat temping times as
well as fantastic heat retention. Our “no hassle”
controls make using this cart as easy as a push of a
button
The bottom line is, your environment is
tough! Our standards are even tougher!
Crimsco a Division of ITW FEG
7737 N 81st Street▼Milwaukee, WI 53223 USA
414-702-8972▼800-367-8413▼Fax 414-354-2821
Form #
41159 (11/10)
MADE in the USA © 2009 ITW-FEG
Item # ____________________________
Model IMC-912 Series
Meal Delivery Cabinets
For 9” x 12” or 6” x 9” Trays
( hot & ambient / hot & hot / all ambient)
Standard Features
▼ 12 gauge Lockable transport latch
▼ Tamper proof fasteners throughout
▼ Top Mounted Forced Air Heating System
▼ Fully insulated
▼ Fully Welded Removable Tray Slides
▼ Lexan Covered Dial Thermometer
▼ Adjustable Thermostat Equipped with Security
Cover
▼ Flush recessed door pull
▼ Heavy duty 8” casters
▼ Magnetic door closure
▼ All stainless steel
▼ Fully welded
▼ Integral dual layer fully welded corner posts
▼ Super duty reinforced base
▼ 270 degree door swing
▼ Full perimeter bumper
▼ One year parts and labor warranty
▼ (3) Fully welded 12 gauge hinges per door
▼ Face mounted “sure seal gasket”
Options
▼ Upgrade to semi-pneumatic casters
▼ Upgrade to fully pneumatic casters
▼ Heavy duty fully welded shelves for stacking
trays
▼ All hot configuration
▼ Ambient configuration
▼ 3 Sided top rail
Item # ____________________________
Crimsco Inc. Correctional Meal Delivery Specialists
Model IMC-912 Series
Holding and Transport Cabinet
For 9”x 12” or 6” x 9” Trays
Model Capacity Width Depth Height Weight Electrical NEMA Casters
IMC-120-912
HA
IMC-120-912
HH
IMC-120-912
AA
Construction: Heliarc welded, fully insulated, stainless steel double pan
construction. Support channels welded at base, integral dual layer fully
welded corner posts (all four corners).
Bumper: Continuous wrap around aluminum (dove-tail) designed bumper
complete with (secure fit) non-marking vinyl insert.
Doors: Double pan design, fully insulated, 270 degree swing, 12 gauge
hinges, recessed door pulls
Heating system: Top mounted forced air, with rear
mounted “tunnel” distribution system. Dial thermometer equipped with
lexan cover, adjustable thermostat equipped with security cover, lighted
on/off switch.
Handles: Unit equipped with 3/4” stainless tubular push/pull handles (one
on each side) above door swing
See tray
Configuration below
See tray
Configuration below
See tray
Configuration below
51” 29” 63” 475 lb 120v
51” 29” 63” 475 lb 120v
51” 29” 63” 475 lb N/A N/A 8”
SPECIFICATIONS
115v, 8’
1000 watt
2000 watt
Casters: 8” super duty polyurethane casters mounted to 1/4 inch mount-
ing plates. (2) swivel with brakes (2) rigid.
Casters equipped with mounting plate shall be secured to reinforced base
channel with 3/8” carriage bolts.
Security Detail: All fasteners shall be tamper proof, hinges and transport latches are 12 ga. And fully welded.
Racking: Fully welded one piece shelving is removable for cleaning.
Tray configuration: (9” x 12”)= 12 level, 2 columns, 2 trays deep per
door for a total of 48 hot and 48 ambient(6” x 9”)=12 level, 2 columns, 3
trays deep per door for a total of 60 hot and 60 ambient.
If opting to stack trays your capacity becomes:
(9” x 12”)= 60 hot and 60 ambient
( 6” x 9”)= 90 hot and 90 ambient
All hot and all ambient carts; totals double
5-15P
115v, 8’
5-20P
8”
8”
Note: in line with its policy to continually improve its products, Crimsco Inc. reserves the right to change materials
and specifications without notice.
Crimsco a Division of ITW FEG
7737 N 81st Street▼Milwaukee, WI 53223 USA
414-702-8972▼800-367-8413▼Fax 414-354-2821
Form #
41159 (11/ 10)
MADE in the USA © 2009 ITW-FEG