Crimsco IHC-72 SHOWN User Manual
Crimsco Inc. Correctional Meal Delivery Specialists
IHC-72 SHOWN
IHC Series Meal Delivery Cabinets
These rugged, built to last delivery carts are fully
insulated and are designed for secure, fast meal
delivery service.
These cabinets are not just some restaurant style
cabinets with security features attached. Our carts
are manufactured from the ground up specifically
for the correctional field.
Our reinforced fully welded base and double layer
design, insures the elimination of any cabinet torque
during transport.
Our “snap in” rear mounted, lockable, removable
heating system is designed for ease of operation as
well as security. Simply remove the heating unit and
the cart is ready to be power washed.
The bottom line is, your environment is
tough! Our standards are even tougher!
Item # ____________________________
Model IHC Series
Holding and Transport Cabinet
For 10” x 14” Trays
Standard Features
▼ 12 gauge Lockable transport latches
▼ Tamper proof fasteners throughout
▼ Rear Mounted removable Heating System
▼ Fully insulated
▼ Fully Welded Removable Tray Slides
▼ Lexan Covered Dial Thermometer
▼ Flush recessed door pull
▼ Heavy duty 8” casters
▼ Magnetic door closures
▼ All stainless steel
▼ Fully welded
▼ Super duty reinforced base
▼ Recessed doors
▼ Full perimeter bumper
▼ One year parts and labor warranty
▼ 12 gauge hinges
Options
▼ Upgrade to semi-rigid casters
▼ Top box for (3) 18” x 26” cold pans
▼ Top rail (3 sides) to hold (2) 5-gallon beverage
▼ Drop down shelf
Crimsco is corrections
7737 N 81st Street▼Milwaukee, WI 53223 USA
414-702-8972▼800-367-8413▼Fax 414-354-2821
Form #
41112 (4/10)
MADE in the USA © 2009 ITW-FEG
Crimsco a Division of ITW FEG
Item # ____________________________
Crimsco Inc. Correctional Meal Delivery Specialists
Model IHC Series
Model Capacity Width Depth Height Weight Electrical NEMA Casters
IHC-48
IHC-72 72 trays
IHC-96 96 trays
Construction: Heliarc welded, fully insulated, stainless steel
double pan construction. Support channels welded at base.
Bumper: Continuous wrap around non-marking bumper.
Doors: Double pan design, fully insulated, recessed, com-
plete with 12 gauge hinges and recessed door pulls
Heating system: Heated by convected air. Removable, vertical rear mounted lockable heating unit with adjustable thermostatic control with a range of 110ºF to 205ºF (preset at
165ºF) and automatic overload protection. Entire compartment insulated with (closed cell foam insulation), Dial thermometer equipped with lexan cover.
48 trays
(10 x14)
(10 x14)
(10 x 14)
38.875” 31.625” 48.625” 450lb 120v
1250 watt
55.125” 31.625” 48.625” 550lbs 120v
1250 watt
55.125” 31.625” 59.375” 650lbs 120v
1250 watt
SPECIFICATIONS
Casters: 8” super duty polyurethane casters mounted to 1/4
inch mounting plates. (4) swivel with brakes (2) rigid, except on
the (IHC-48) which comes with (2) swivel with brakes and (2)
rigid. Casters shall be secured to reinforced base channel with
3/8” carriage bolts.
Security Detail: All fasteners shall be tamper proof, hinges and
transport latches are 12 ga. And fully welded.
Racking: Fully welded one piece shelving is removable for
cleaning.
Tray configuration: (IHC-48)= 12 level, 2 columns, 2 trays
deep. (IHC-72)=12 level, 3 columns, 2 trays deep.
(IHC-96)=16 level, 3 columns, 2 trays deep.
115v, 8’
5-15P
115v, 8’
5-15P
115v, 8’
5-15P
8”
8”
8”
Note: in line with its policy to continually improve its products, Crimsco Inc. reserves the right to change materials
and specifications without notice.
Crimsco a Division of ITW FEG
7737 N 81st Street▼Milwaukee, WI 53223 USA
414-702-8972▼800-367-8413▼Fax 414-354-2821
Form #
41112 (4/10)
MADE in the USA © 2009 ITW-FEG
Loading...