Crimsco ER-20, ER-40 Specifications
Crimsco Inc. Healthcare Meal Delivery Specialists
ER-40 Shown
Note: This cart cannot be washed with hose!
ER Series Healthcare Hot/Cold
Meal Delivery Cabinets
These state of the art, dual tray heated and refrigerated carts are the perfect solution to your patient
meal service needs.
Built to last for years of service. They are fully insulated and designed for ease of operation.
Our reinforced fully welded base and integral
Dual layer, fully welded corner post design insures
the elimination of any cabinet torque during transport.
Our rear mounted forced air heating and cooling
system is designed for superior hot and cold temping
times, our unique thermo barrier system provides
fantastic heat and cooling retention. Our “no hassle”
controls make using this cart as easy as a push of a
button.
The bottom line is, your job is tough! Our
standards are even tougher!
Crimsco a Division of ITW FEG
7737 N 81st Street▼Milwaukee, WI 53223 USA
414-702-8972▼800-367-8413▼Fax 414-354-2821
Form #
41148 (9/09)
MADE in the USA © 2009 ITW-FEG
Item # ____________________________
Model ER Series
Healthcare Hot/Cold Dual Tray
Meal Delivery Cart
Standard Features
▼ ER-20 holds 20 cold trays accepts 12x 20 trays,
two per level; all with adjacent hot shelves holding 20 (9”) plates.
▼ ER-40 holds 20-40 cold trays, accepts 12x16 two
per level, or 14x18, 15x20 single tray per level, all
with adjacent hot shelf holding 20-40 (9”) plates.
▼ Rear Mounted Forced Air Heating and cooling
Systems
▼ Fully insulated
▼ Fully Welded Removable Tray Slides
▼ Lexan Covered digital thermometers
▼ Flush recessed door pulls
▼ Heavy duty 8” casters
▼ Magnetic door closures
▼ All stainless steel
▼ Fully welded
▼ Integral dual layer fully welded corner and cen-
ter posts
▼ Super duty reinforced base
▼ Flush mounted doors
▼ Full perimeter bumper
▼ One year parts and labor warranty
▼ Fully welded 12 gauge hinges
Options
▼ Upgrade casters to semi pneumatic
▼ Security package
▼ Beverage retainer Brackets
Item # ____________________________
Crimsco Inc. Healthcare Meal Delivery Specialists
Model ER Series
Healthcare Hot/Cold Dual Tray
Model Capacity Width Depth Height Weight Electrical NEMA Casters
ER-20 (20) 9” plates and (20)
12 x 20 trays
ER-40 (40) 9” plates and (40)
12 x 16 trays also accepts (20) 14 x 18 or
(20) 15 x 20 trays
Construction: Heliarc welded, fully insulated,
stainless steel double pan construction. Support channels welded at base, integral dual layer fully welded
corner posts (all four corners).
Bumper: Continuous wrap around aluminum (dovetail) designed bumper complete with (secure fit) nonmarking vinyl insert.
Doors: Double pan design, fully insulated, 12 gauge
hinges, recessed door pulls
Heating system: Rear mounted forced air, with rear
mounted “tunnel” distribution system. Digital thermometers equipped with lexan cover, lighted on/off
switches.
45”
67.5”
32.25” 67.5” 55” to top of
deck
32.25” 67.5” 55” to top of
deck
SPECIFICATIONS
Casters: 8” super duty polyurethane casters mounted to
1/4 inch mounting plates. (4) swivel with brakes (ER-40
only) (2) rigid.
Casters equipped with mounting plate shall be secured to
reinforced base channel with 3/8” carriage bolts.
Racking: Fully welded one piece shelving is removable
for cleaning. Hot side holds wire shelf (supplied) that
accepts 9” plates. Cold side accepts healthcare tray.
Tray configuration: (ER-20)= 10 level 3.8” spacing.
(ER-40)= 10 level 3.8” spacing.
575lb 120v
1080 watt
750lbs 120v
1080 watt
115v, 8’
5-20P
115v, 8’
5-20P
8”
8”
Note: in line with its policy to continually improve its products, Crimsco Inc. reserves the right to change materials
and specifications without notice.
Crimsco a Division of ITW FEG
7737 N 81st Street▼Milwaukee, WI 53223 USA
414-702-8972▼800-367-8413▼Fax 414-354-2821
Form #
41148 (9/ 09)
MADE in the USA © 2009 ITW-FEG
Loading...