Crimestopper SV-9145 Operator's Manual

0

1

Replacement Rear View Mirror with built-in

This product must be installed and used only in accordance with
these instructions. Any alteration of this product that enables it to
be used in ways other than those stated in this manual could
distract the driver and result in an accident or injury.

4.5in LCD Mon itor & Hands-Free Phone
Interface

Model: SV-9145

Owner’s Manual

Features:

• Rearview Mirror with 4.5" LCD

• Auxiliary Video Input

• Rearview Camera Input

• PAL/NTSC system compatible

• Cellular Phone Hands Free Input

• Hands Free Microphone Built-in

Warning: Backing up vehicle

Do not back up vehicle while watching the mirror/monitor screen.
Always look in the direction of vehicle motion. Use the mirror/
monitor as an aid in safety confirmation. The distance looks
different in the monitor. The actual distance may be shorter than
it looks in the monitor. The range of image is limited. Beware of
blind spots.

Cautions

Product is intended to assist in safe driving and to allow the driver
to have a broader rearview during reversing. You, as the driver,
are solely responsible for the safe operation of your vehicle and
the safety of your passengers according to the country and their
local traffic regulations. Do not use any features of this system
to the extent it distracts you from safe driving. Your first priority
while driving should always be the safe operation of your vehicle.

2

3

1. Functions

SW2: Press the button will display or off the image from the

rearview camera.

2. Operation

Figure

Figure 1 shows the functions of the rearview mirror.
A: 4.5" LCD panel;
B: Rearview Mirror;
C: SW1;
D: SW2;
E: LCD Brightness Control;
F: Power Indicator (Red when Power is on).
G: Internal Speaker;
H: Volume control;
I: Internal microphone;

1

SW1 AND SW 2

1). Vehicle Reversing:
No function

2). Vehicle Driving:
SW1: When the vehicle is parking, press the button will turn on or

off the display monitor.

1) How to turn the Rearview Mirror on/off

A. The system is automatically on when ignition is turned on.
B. The system turns off when ignition is turned off.

How to view the Rear-observation Camera Image

A. The LCD can display the rearview camera image automatically

whenever the vehicle is shifted into the reverse gear.

B. When press SW2, the LCD can display the rearview camera

image.

C. Press SW 2 again,the LCD can automatically switch back to the

original setting.

3) Volume Control

A. The switch H is adjusted for control volume.
B. The switch is on the right bottom of the mirror.

4) LCD Monitor Brightness Control

A. The brightness adjustment control is switch E.
B. The switch is on the left bottom of the rearview mirror.
C. Rotating the wheel to the right can decrease the brightness.
D. Rotating the wheel to the left can increase the brightness.

5) How to play an external audio or video signal

A. Be sure the external audio or video device is engaged.
B. Press SW1 to turn on/off the LCD and the external signal input.