Crimestopper SV-9145 Installation Manual

0
Replacement Rear View Mirror with built-in
4.5in LCD Mon itor & Hands-Free Phone Interface
Model: SV-9145
Features:
Rearview Mirror with 4.5" LCD
Auxiliary Video Input
Rearview Camera Input
PAL/NTSC system compatible
Cellular Phone Hands Free Input
Hands Free Microphone Built-in
1
Cautions!
The product is intended to assist in safe driving and to allow the driver to have a broader rearview while backs the vehicle. You, as a driver, are solely responsible for the safe operation of your vehicle and the saf ety of your passengers according to the country and their local traffic regulations. Do not use any features of this system to the extent it distracts you from safe driving. Your first priority while driving should always be the safe operation of your vehicle.
1. This product utilizes high voltage. Any unauthorized modifications or damage to the products may result in electrical shock. Handle all components with care. Inspect regularly for damage to components and cabling.
2. You must be responsible to ensure that the installation of this product
does not void or affect the vehicle manufacturer’s warranty. MediaView Technologies Corporati on, or its branches are not liable in full or in part for improper installation resulting
in loss or damage to your property, or for voiding all or part of the vehicle manufacturer’s warranty.
3. Do not apply excessive force to any of the components contained within this
kit. Excessive force used before, during or af ter installation that results in a damaged or non-functional part shall void all warranties.
4. Please follow the procedure from this installation manual. Improper installation or modification of this product shall void
all warranties.
5. You are advised not to display the external video input while driving when using the hands free feature, you should observe the road situation carefully to avoid traffic accidents.
6. Make selections only when stopped. Please don’t use remote controller when driving.
2
Packing list
The Rear view mirror Model SV-9145 consists of the following items:
1. Rear View Mirror-1
2. Control Box-1
3. Filter Box -1
4. Control Box Monitor Cable -1
5. Mobile Phone Hands Free Cable Plug-1
6. Mobile Phone Adhesive Magnetic Seat-1
7. Audio and video cable -1
8. Video Cable Adapter -1
3
Installation Instructions
1. Mount the Mi rror/Monitor
a) Remove the original factory mirror. (Do not use excessive force when
removing factory mirror.) Check to make sure that the factory mirror mount you remove matches the mirror mount on the replacement mirror.
b) Slide the receiving bracket on the back of the new mirror stalk onto the
windshield-mounting button. Move the bracket back and forth until completely seated.
c) Tightly the T-20 mounting bracket screw.
2. Insta ll The Control box, Filter Box
Connect the control box cable to the rearview mirror /monitor cable. Rout the monitor cable behind the headliner of the windshield. And then
connect 4 wires in the following manner:
Red wire - Ignition Switch (12 volt when vehicle is Ignition) Black wire - Chassis ground (negat ive) Green wire - Reverse light switch (12 volt when vehicle is in the reverse gear)
4
Yellow wire - Parking brake switch (12 volt when vehicle is in the parking state)
W ARNIN G: Observe polarity when connecting the cables .the cable must not be
reversed of modified.
Figure 3
4. Signal Inputs
The signal input connections for the system include:
Rear Camera: Plug the RJ 11 camera cable end into the control box AVin-1 location, route the cable to the rear camera and plug the 4-pin connector into camera 4 pin connector. Users can see the rearview camera image when the car is shifted into reverse.
5. Controls and Indicators
5
Figure 4
Figure 3 And Figure 4 shows the function of rear view mirror.
A: 4.5" LCD panel ; B: Rearview Mirror ; C: SW1 ; D: SW2 ; E: LCD Brightness Control ; F: Power Indicator (Red when Power is on) ; G: Internal Speaker; H: Volume control ; I: Internal microphone .
SW1 AND SW 2
1). Vehicle Reversing: No function
2). Vehicle Driving:
SW1: When the vehicle is parking, press the button will turn on or
off the display monitor.
SW2: Press the button will display or off the image from the
rearview camera.
6. Operation
1) How to turn the Rearview Mirror on/off
A. The system is automatically on when ignition is turned on.
B. The system turns off when ignition is turned off.
4
Loading...
+ 4 hidden pages